CPU freq to 240 MHz, redo sdkconfigs

Author: dhalbert

ports/espressif/boards/adafruit_feather_esp32_v2/sdkconfig

@@ -1,198 +1,11 @@
-# Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) Project Configuration
-#
-# Bootloader config
-#
-CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
-# CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set
-CONFIG_BOOTLOADER_LOG_LEVEL=0
-# end of Bootloader config
-
-#
-# Serial flasher config
-#
-# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
-# end of Serial flasher config
-
 #
 # Partition Table
 #
 CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="esp-idf-config/partitions-8MB-no-uf2.csv"
 CONFIG_PARTITION_TABLE_FILENAME="esp-idf-config/partitions-8MB-no-uf2.csv"
 # end of Partition Table
 
-#
-# Compiler options
-#
-CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
-# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
-CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
-# end of Compiler options
-
-#
-# Component config
-#
-#
-# Bluetooth
-#
-# CONFIG_BT_ENABLED is not set
-# end of Bluetooth
-
-#
-# Driver configurations
-#
-#
-# TWAI configuration
-#
-# CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC is not set
-# CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST is not set
-# CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID is not set
-# CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT is not set
-# end of TWAI configuration
-
-#
-# UART configuration
-#
-CONFIG_UART_ISR_IN_IRAM=y
-# end of UART configuration
-
-#
-# RTCIO configuration
-#
-# CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC is not set
-# end of RTCIO configuration
-
-#
-# GPIO Configuration
-#
-# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set
-# end of GPIO Configuration
-
-# end of Driver configurations
-
-#
-# eFuse Bit Manager
-#
-# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set
-CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y
-# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set
-CONFIG_EFUSE_MAX_BLK_LEN=192
-# end of eFuse Bit Manager
-
-#
-# ESP-TLS
-#
-# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set
-# CONFIG_ESP_TLS_SERVER_MIN_AUTH_MODE_OPTIONAL is not set
-# end of ESP-TLS
-
-#
-# ESP32-specific
-#
-CONFIG_ESP32_ECO3_CACHE_LOCK_FIX=y
-CONFIG_ESP32_SPIRAM_SUPPORT=y
-#
-# SPI RAM config
-#
-CONFIG_SPIRAM_TYPE_AUTO=y
-# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
-# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
-# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
-CONFIG_SPIRAM_SIZE=-1
-CONFIG_SPIRAM_SPEED_40M=y
-CONFIG_SPIRAM=y
-CONFIG_SPIRAM_BOOT_INIT=y
-# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
-CONFIG_SPIRAM_USE_MEMMAP=y
-# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
-# CONFIG_SPIRAM_USE_MALLOC is not set
-CONFIG_SPIRAM_MEMTEST=y
-# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
-# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set
-CONFIG_SPIRAM_CACHE_WORKAROUND=y
-#
-# SPIRAM cache workaround debugging
-#
-CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_MEMW=y
-# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_DUPLDST is not set
-# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_NOPS is not set
-# end of SPIRAM cache workaround debugging
-
-#
-# SPIRAM workaround libraries placement
-#
-CONFIG_SPIRAM_CACHE_LIBJMP_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBMATH_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBNUMPARSER_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBIO_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBCHAR_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBMEM_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBRAND_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBENV_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBFILE_IN_IRAM=y
-CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM=y
-# end of SPIRAM workaround libraries placement
-
-CONFIG_SPIRAM_BANKSWITCH_ENABLE=y
-CONFIG_SPIRAM_BANKSWITCH_RESERVE=8
-#
-# PSRAM clock and cs IO for ESP32-DOWD
-#
-CONFIG_D0WD_PSRAM_CLK_IO=17
-CONFIG_D0WD_PSRAM_CS_IO=16
-# end of PSRAM clock and cs IO for ESP32-DOWD
-
-#
-# PSRAM clock and cs IO for ESP32-D2WD
-#
-CONFIG_D2WD_PSRAM_CLK_IO=9
-CONFIG_D2WD_PSRAM_CS_IO=10
-# end of PSRAM clock and cs IO for ESP32-D2WD
-
-#
-# PSRAM clock and cs IO for ESP32-PICO
-#
-CONFIG_PICO_PSRAM_CS_IO=10
-# end of PSRAM clock and cs IO for ESP32-PICO
-
-# CONFIG_SPIRAM_CUSTOM_SPIWP_SD3_PIN is not set
-CONFIG_SPIRAM_SPIWP_SD3_PIN=7
-# CONFIG_SPIRAM_2T_MODE is not set
-# end of SPI RAM config
-
-# end of ESP32-specific
-
-#
-# ADC-Calibration
-#
-CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y
-CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y
-CONFIG_ADC_CAL_LUT_ENABLE=y
-# end of ADC-Calibration
-
-#
-# Common ESP-related
-#
-CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
-# end of Common ESP-related
-
-#
-# Ethernet
-#
-# CONFIG_ETH_USE_ESP32_EMAC is not set
-# end of Ethernet
-
-#
-# PHY
-#
-CONFIG_ESP_PHY_REDUCE_TX_POWER=y
-# end of PHY
-
+# *** temporary custom CONSOLE_UART settings, to send log output to TX/RX pins on Feather ESP32V2
 #
 # ESP System Settings
 #
@@ -209,91 +22,3 @@ CONFIG_ESP_CONSOLE_UART_RX_GPIO=7
 CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200
 # CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set
 # end of ESP System Settings
-
-#
-# High resolution timer (esp_timer)
-#
-# CONFIG_ESP_TIMER_IMPL_FRC2 is not set
-CONFIG_ESP_TIMER_IMPL_TG0_LAC=y
-# end of High resolution timer (esp_timer)
-
-#
-# Wi-Fi
-#
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
-# CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER is not set
-CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
-CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32
-# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set
-# end of Wi-Fi
-
-#
-# FreeRTOS
-#
-# CONFIG_FREERTOS_FPU_IN_ISR is not set
-# end of FreeRTOS
-
-#
-# Hardware Abstraction Layer (HAL) and Low Level (LL)
-#
-# CONFIG_HAL_ASSERTION_ENABLE is not set
-CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
-# end of Hardware Abstraction Layer (HAL) and Low Level (LL)
-
-#
-# LWIP
-#
-CONFIG_LWIP_LOCAL_HOSTNAME="Adafruit-Feather-ESP32-V2"
-# end of LWIP
-
-#
-# Supplicant
-#
-# CONFIG_WPA_MBO_SUPPORT is not set
-# CONFIG_WPA_DPP_SUPPORT is not set
-# end of Supplicant
-
-# end of Component config
-
-#
-# Deprecated options for backward compatibility
-#
-CONFIG_LOG_BOOTLOADER_LEVEL_NONE=y
-# CONFIG_LOG_BOOTLOADER_LEVEL_INFO is not set
-CONFIG_LOG_BOOTLOADER_LEVEL=0
-CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y
-# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set
-CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2
-CONFIG_SPIRAM_SUPPORT=y
-CONFIG_TRACEMEM_RESERVE_DRAM=0x0
-# CONFIG_ULP_COPROC_ENABLED is not set
-CONFIG_ULP_COPROC_RESERVE_MEM=0
-CONFIG_BROWNOUT_DET=y
-CONFIG_BROWNOUT_DET_LVL_SEL_0=y
-# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
-# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set
-CONFIG_BROWNOUT_DET_LVL=0
-# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set
-# CONFIG_NO_BLOBS is not set
-# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set
-# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set
-CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y
-CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4
-CONFIG_ESP32S2_PANIC_PRINT_HALT=y
-# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set
-CONFIG_CONSOLE_UART_CUSTOM=y
-# CONFIG_ESP_CONSOLE_UART_NONE is not set
-CONFIG_CONSOLE_UART=y
-CONFIG_CONSOLE_UART_CUSTOM_NUM_0=y
-# CONFIG_CONSOLE_UART_CUSTOM_NUM_1 is not set
-CONFIG_CONSOLE_UART_NUM=0
-CONFIG_CONSOLE_UART_TX_GPIO=8
-CONFIG_CONSOLE_UART_RX_GPIO=7
-CONFIG_CONSOLE_UART_BAUDRATE=115200
-# end of Deprecated options for backward compatibility