Merge pull request #5042 from NathanY3G/add-support-for-jmp-pin

Added support for specifying the JMP pin (RP2 PIO)

Author: microdev1

locale/circuitpython.pot

@@ -1187,7 +1187,7 @@ msgstr ""
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
 #, c-format
-msgid "Instruction %d jumps on pin"
+msgid "Missing jmp_pin. Instruction %d jumps on pin"
 msgstr ""
 
 #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c

ports/raspberrypi/bindings/rp2pio/StateMachine.c

@@ -109,6 +109,7 @@
 //|         :param int sideset_pin_count: the count of consecutive pins to use with a side set starting at first_sideset_pin
 //|         :param int initial_sideset_pin_state: the initial output value for sideset pins starting at first_sideset_pin
 //|         :param int initial_sideset_pin_direction: the initial output direction for sideset pins starting at first_sideset_pin
+//|         :param ~microcontroller.Pin jmp_pin: the pin which determines the branch taken by JMP PIN instructions
 //|         :param bool exclusive_pin_use: When True, do not share any pins with other state machines. Pins are never shared with other peripherals
 //|         :param bool auto_pull: When True, automatically load data from the tx FIFO into the
 //|             output shift register (OSR) when an OUT instruction shifts more than pull_threshold bits
@@ -138,6 +139,7 @@ STATIC mp_obj_t rp2pio_statemachine_make_new(const mp_obj_type_t *type, size_t n
            ARG_pull_in_pin_up, ARG_pull_in_pin_down,
            ARG_first_set_pin, ARG_set_pin_count, ARG_initial_set_pin_state, ARG_initial_set_pin_direction,
            ARG_first_sideset_pin, ARG_sideset_pin_count, ARG_initial_sideset_pin_state, ARG_initial_sideset_pin_direction,
+           ARG_jmp_pin,
            ARG_exclusive_pin_use,
            ARG_auto_pull, ARG_pull_threshold, ARG_out_shift_right,
            ARG_wait_for_txstall,
@@ -167,6 +169,8 @@ STATIC mp_obj_t rp2pio_statemachine_make_new(const mp_obj_type_t *type, size_t n
         { MP_QSTR_initial_sideset_pin_state, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
         { MP_QSTR_initial_sideset_pin_direction, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0x1f} },
 
+        { MP_QSTR_jmp_pin, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
+
         { MP_QSTR_exclusive_pin_use, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = true} },
         { MP_QSTR_auto_pull, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} },
         { MP_QSTR_pull_threshold, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 32} },
@@ -210,6 +214,8 @@ STATIC mp_obj_t rp2pio_statemachine_make_new(const mp_obj_type_t *type, size_t n
         mp_raise_ValueError(translate("Side set pin count must be between 1 and 5"));
     }
 
+    const mcu_pin_obj_t *jmp_pin = validate_obj_is_pin_or_none(args[ARG_jmp_pin].u_obj);
+
     mp_int_t pull_threshold = args[ARG_pull_threshold].u_int;
     mp_int_t push_threshold = args[ARG_push_threshold].u_int;
     if (pull_threshold < 1 || pull_threshold > 32) {
@@ -241,6 +247,7 @@ STATIC mp_obj_t rp2pio_statemachine_make_new(const mp_obj_type_t *type, size_t n
         first_in_pin, args[ARG_in_pin_count].u_int, args[ARG_pull_in_pin_up].u_int, args[ARG_pull_in_pin_down].u_int,
         first_set_pin, args[ARG_set_pin_count].u_int, args[ARG_initial_set_pin_state].u_int, args[ARG_initial_set_pin_direction].u_int,
         first_sideset_pin, args[ARG_sideset_pin_count].u_int, args[ARG_initial_sideset_pin_state].u_int, args[ARG_initial_sideset_pin_direction].u_int,
+        jmp_pin,
         0,
         args[ARG_exclusive_pin_use].u_bool,
         args[ARG_auto_pull].u_bool, pull_threshold, args[ARG_out_shift_right].u_bool,

ports/raspberrypi/bindings/rp2pio/StateMachine.h

@@ -44,6 +44,7 @@ void common_hal_rp2pio_statemachine_construct(rp2pio_statemachine_obj_t *self,
     const mcu_pin_obj_t *first_in_pin, uint8_t in_pin_count, uint32_t pull_pin_up, uint32_t pull_pin_down,
     const mcu_pin_obj_t *first_set_pin, uint8_t set_pin_count, uint32_t initial_set_pin_state, uint32_t initial_set_pin_direction,
     const mcu_pin_obj_t *first_sideset_pin, uint8_t sideset_pin_count, uint32_t initial_sideset_pin_state, uint32_t initial_sideset_pin_direction,
+    const mcu_pin_obj_t *jmp_pin,
     uint32_t wait_gpio_mask,
     bool exclusive_pin_use,
     bool auto_pull, uint8_t pull_threshold, bool out_shift_right,

ports/raspberrypi/common-hal/audiobusio/I2SOut.c

@@ -126,6 +126,7 @@ void common_hal_audiobusio_i2sout_construct(audiobusio_i2sout_obj_t *self,
         0, 0, // in pulls
         NULL, 0, 0, 0x1f, // set pins
         bit_clock, 2, 0, 0x1f, // sideset pins
+        NULL, // jump pin
         0, // wait gpio pins
         true, // exclusive pin use
         false, 32, false, // shift out left to start with MSB

ports/raspberrypi/common-hal/audiobusio/PDMIn.c

@@ -71,6 +71,7 @@ void common_hal_audiobusio_pdmin_construct(audiobusio_pdmin_obj_t *self,
         0, 0, // in pulls
         NULL, 0, 0, 0x1f, // set pins
         clock_pin, 1, 0, 0x1f, // sideset pins
+        NULL, // jump pin
         0, // wait gpio pins
         true, // exclusive pin use
         false, 32, false, // out settings

ports/raspberrypi/common-hal/displayio/ParallelBus.c

@@ -99,6 +99,7 @@ void common_hal_displayio_parallelbus_construct(displayio_parallelbus_obj_t *sel
         NULL, 0, 0, 0, // first in pin, # in pins
         NULL, 0, 0, 0, // first set pin
         write, 1, 0, 1, // first sideset pin
+        NULL, // jump pin
         0, // wait gpio pins
         true, // exclusive pin usage
         true, 8, true, // TX, auto pull every 8 bits. shift left to output msb first

ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c

@@ -111,6 +111,7 @@ void common_hal_imagecapture_parallelimagecapture_construct(imagecapture_paralle
         #else
         NULL, 0, 0, 0, // sideset pins
         #endif
+        NULL, // jump pin
         (1 << vertical_sync->number) | (1 << horizontal_reference->number) | (1 << data_clock->number), // wait gpio pins
         true, // exclusive pin use
         false, 32, false, // out settings

ports/raspberrypi/common-hal/neopixel_write/__init__.c

@@ -71,6 +71,7 @@ void common_hal_neopixel_write(const digitalio_digitalinout_obj_t *digitalinout,
         NULL, 1, // set
         digitalinout->pin, 1, // sideset
         0, pins_we_use, // initial pin state
+        NULL, // jump pin
         pins_we_use, true, false,
         true, 8, false, // TX, auto pull every 8 bits. shift left to output msb first
         true, // Wait for txstall. If we don't, then we'll deinit too quickly.

ports/raspberrypi/common-hal/pulseio/PulseIn.c

@@ -67,6 +67,7 @@ void common_hal_pulseio_pulsein_construct(pulseio_pulsein_obj_t *self,
         NULL, 0,
         NULL, 0,
         1, 0,
+        NULL, // jump pin
         1 << self->pin, false, true,
             false, 8, false, // TX, unused
             false,

ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c

@@ -84,6 +84,7 @@ void common_hal_rotaryio_incrementalencoder_construct(rotaryio_incrementalencode
         3, 0, // in pulls
         NULL, 0, 0, 0x1f, // set pins
         NULL, 0, 0, 0x1f, // sideset pins
+        NULL, // jump pin
         0, // wait gpio pins
         true, // exclusive pin use
         false, 32, false, // out settings