Merge pull request #9513 from tannewt/rp2350_rgbmatrix

Enable RGBMatrix on RP2350

Author: dhalbert

lib/protomatter

@@ -10,7 +10,6 @@ CHIP_FAMILY = rp2
 EXTERNAL_FLASH_DEVICES = "GD25Q64C,W25Q64JVxQ"
 
 CIRCUITPY_ALARM = 0
-CIRCUITPY_RGBMATRIX = 0
 
 CIRCUITPY_FLOPPYIO = 0
 CIRCUITPY_PICODVI = 1

lib/tinyusb

@@ -10,4 +10,3 @@ CHIP_FAMILY = rp2
 EXTERNAL_FLASH_DEVICES = "W25Q128JVxQ"
 
 CIRCUITPY_ALARM = 0
-CIRCUITPY_RGBMATRIX = 0

ports/raspberrypi/boards/adafruit_feather_rp2350/mpconfigboard.mk

@@ -11,7 +11,6 @@ EXTERNAL_FLASH_DEVICES = "W25Q16JVxQ"
 
 CIRCUITPY__EVE = 1
 CIRCUITPY_ALARM = 0
-CIRCUITPY_RGBMATRIX = 0
 
 # Include these Python libraries in firmware.
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_SimpleIO

ports/raspberrypi/boards/adafruit_metro_rp2350/mpconfigboard.mk

@@ -11,7 +11,6 @@ EXTERNAL_FLASH_DEVICES = "W25Q16JVxQ"
 
 CIRCUITPY__EVE = 1
 CIRCUITPY_ALARM = 0
-CIRCUITPY_RGBMATRIX = 0
 
 # Include these Python libraries in firmware.
 FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

ports/raspberrypi/boards/cytron_iriv_io_controller/mpconfigboard.mk

@@ -11,4 +11,3 @@ EXTERNAL_FLASH_DEVICES = "W25Q32JVxQ"
 
 CIRCUITPY__EVE = 1
 CIRCUITPY_ALARM = 0
-CIRCUITPY_RGBMATRIX = 0

ports/raspberrypi/boards/cytron_motion_2350_pro/mpconfigboard.mk

@@ -11,7 +11,6 @@ EXTERNAL_FLASH_DEVICES = "W25Q128JVxQ"
 
 CIRCUITPY__EVE = 1
 CIRCUITPY_ALARM = 0
-CIRCUITPY_RGBMATRIX = 0
 CIRCUITPY_PICODVI = 1
 
 FROZEN_MPY_DIRS += $(TOP)/ports/raspberrypi/boards/solderparty_rp2040_stamp

ports/raspberrypi/boards/raspberry_pi_pico2/mpconfigboard.mk

@@ -11,7 +11,6 @@ EXTERNAL_FLASH_DEVICES = "W25Q128JVxQ"
 
 CIRCUITPY__EVE = 1
 CIRCUITPY_ALARM = 0
-CIRCUITPY_RGBMATRIX = 0
 CIRCUITPY_PICODVI = 1
 
 FROZEN_MPY_DIRS += $(TOP)/ports/raspberrypi/boards/solderparty_rp2040_stamp

ports/raspberrypi/boards/solderparty_rp2350_stamp/mpconfigboard.mk

@@ -119,7 +119,6 @@ static void __not_in_flash_func(dma_irq_handler)(void) {
     if (active_picodvi == NULL) {
         return;
     }
-    // gpio_put(10, 1);
     uint ch_num = active_picodvi->dma_pixel_channel;
     dma_channel_hw_t *ch = &dma_hw->ch[ch_num];
     dma_hw->intr = 1u << ch_num;
@@ -128,7 +127,6 @@ static void __not_in_flash_func(dma_irq_handler)(void) {
     // will trigger the pixel channel).
     ch = &dma_hw->ch[active_picodvi->dma_command_channel];
     ch->al3_read_addr_trig = (uintptr_t)active_picodvi->dma_commands;
-    // gpio_put(10, 0);
 }
 
 void common_hal_picodvi_framebuffer_construct(picodvi_framebuffer_obj_t *self,
@@ -392,11 +390,6 @@ void common_hal_picodvi_framebuffer_construct(picodvi_framebuffer_obj_t *self,
         never_reset_pin_number(i);
     }
 
-    // gpio_init(10);
-    // gpio_put(10, 0);
-    // gpio_set_dir(10, GPIO_OUT);
-    // never_reset_pin_number(10);
-
     dma_channel_config c;
     c = dma_channel_get_default_config(self->dma_command_channel);
     channel_config_set_transfer_data_size(&c, DMA_SIZE_32);