"busio.UART not yet implemented -> not available

hathach · hathach · commit f543c8415d96 · 2018-10-03T11:30:31.000+07:00
diff --git a/locale/circuitpython.pot b/locale/circuitpython.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-09-26 02:09+0700\n"
+"POT-Creation-Date: 2018-10-03 11:28+0700\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -719,12 +719,12 @@ msgstr ""
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:245 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:326 ports/nrf/common-hal/busio/UART.c:331
-#: ports/nrf/common-hal/busio/UART.c:336 ports/nrf/common-hal/busio/UART.c:342
-#: ports/nrf/common-hal/busio/UART.c:347 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:356 ports/nrf/common-hal/busio/UART.c:364
-msgid "busio.UART not yet implemented"
+#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
+#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
+#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
+#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
+#: ports/nrf/common-hal/busio/UART.c:360
+msgid "busio.UART not available"
 msgstr ""
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
diff --git a/locale/de_DE.po b/locale/de_DE.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-09-26 02:09+0700\n"
+"POT-Creation-Date: 2018-10-03 11:28+0700\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: Sebastian Plamauer\n"
 "Language-Team: \n"
@@ -732,12 +732,12 @@ msgstr "ungültiger dupterm index"
 msgid "Odd parity is not supported"
 msgstr "bytes mit merh als 8 bits werden nicht unterstützt"
 
-#: ports/nrf/common-hal/busio/UART.c:245 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:326 ports/nrf/common-hal/busio/UART.c:331
-#: ports/nrf/common-hal/busio/UART.c:336 ports/nrf/common-hal/busio/UART.c:342
-#: ports/nrf/common-hal/busio/UART.c:347 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:356 ports/nrf/common-hal/busio/UART.c:364
-msgid "busio.UART not yet implemented"
+#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
+#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
+#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
+#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
+#: ports/nrf/common-hal/busio/UART.c:360
+msgid "busio.UART not available"
 msgstr ""
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
diff --git a/locale/en_US.po b/locale/en_US.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-09-26 02:09+0700\n"
+"POT-Creation-Date: 2018-10-03 11:28+0700\n"
 "PO-Revision-Date: 2018-07-27 11:55-0700\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -719,12 +719,12 @@ msgstr ""
 msgid "Odd parity is not supported"
 msgstr ""
 
-#: ports/nrf/common-hal/busio/UART.c:245 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:326 ports/nrf/common-hal/busio/UART.c:331
-#: ports/nrf/common-hal/busio/UART.c:336 ports/nrf/common-hal/busio/UART.c:342
-#: ports/nrf/common-hal/busio/UART.c:347 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:356 ports/nrf/common-hal/busio/UART.c:364
-msgid "busio.UART not yet implemented"
+#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
+#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
+#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
+#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
+#: ports/nrf/common-hal/busio/UART.c:360
+msgid "busio.UART not available"
 msgstr ""
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
diff --git a/locale/es.po b/locale/es.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-09-26 02:09+0700\n"
+"POT-Creation-Date: 2018-10-03 11:28+0700\n"
 "PO-Revision-Date: 2018-08-24 22:56-0500\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -737,12 +737,12 @@ msgstr "index dupterm inválido"
 msgid "Odd parity is not supported"
 msgstr "bytes > 8 bits no son soportados"
 
-#: ports/nrf/common-hal/busio/UART.c:245 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:326 ports/nrf/common-hal/busio/UART.c:331
-#: ports/nrf/common-hal/busio/UART.c:336 ports/nrf/common-hal/busio/UART.c:342
-#: ports/nrf/common-hal/busio/UART.c:347 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:356 ports/nrf/common-hal/busio/UART.c:364
-msgid "busio.UART not yet implemented"
+#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
+#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
+#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
+#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
+#: ports/nrf/common-hal/busio/UART.c:360
+msgid "busio.UART not available"
 msgstr ""
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
diff --git a/locale/fil.po b/locale/fil.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-09-26 02:09+0700\n"
+"POT-Creation-Date: 2018-10-03 11:28+0700\n"
 "PO-Revision-Date: 2018-08-30 23:04-0700\n"
 "Last-Translator: Timothy <me@timothygarcia.ca>\n"
 "Language-Team: fil\n"
@@ -738,12 +738,13 @@ msgstr "mali ang buffer length"
 msgid "Odd parity is not supported"
 msgstr "hindi sinusuportahan ang bytes > 8 bits"
 
-#: ports/nrf/common-hal/busio/UART.c:245 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:326 ports/nrf/common-hal/busio/UART.c:331
-#: ports/nrf/common-hal/busio/UART.c:336 ports/nrf/common-hal/busio/UART.c:342
-#: ports/nrf/common-hal/busio/UART.c:347 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:356 ports/nrf/common-hal/busio/UART.c:364
-msgid "busio.UART not yet implemented"
+#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
+#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
+#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
+#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
+#: ports/nrf/common-hal/busio/UART.c:360
+#, fuzzy
+msgid "busio.UART not available"
 msgstr "hindi pa implemented ang busio.UART"
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
diff --git a/locale/fr.po b/locale/fr.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: 0.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-09-26 02:09+0700\n"
+"POT-Creation-Date: 2018-10-03 11:28+0700\n"
 "PO-Revision-Date: 2018-08-14 11:01+0200\n"
 "Last-Translator: Pierrick Couturier <arofarn@arofarn.info>\n"
 "Language-Team: fr\n"
@@ -734,12 +734,13 @@ msgstr "longueur de tampon invalide"
 msgid "Odd parity is not supported"
 msgstr "octets > 8 bits non supporté"
 
-#: ports/nrf/common-hal/busio/UART.c:245 ports/nrf/common-hal/busio/UART.c:322
-#: ports/nrf/common-hal/busio/UART.c:326 ports/nrf/common-hal/busio/UART.c:331
-#: ports/nrf/common-hal/busio/UART.c:336 ports/nrf/common-hal/busio/UART.c:342
-#: ports/nrf/common-hal/busio/UART.c:347 ports/nrf/common-hal/busio/UART.c:352
-#: ports/nrf/common-hal/busio/UART.c:356 ports/nrf/common-hal/busio/UART.c:364
-msgid "busio.UART not yet implemented"
+#: ports/nrf/common-hal/busio/UART.c:318 ports/nrf/common-hal/busio/UART.c:322
+#: ports/nrf/common-hal/busio/UART.c:327 ports/nrf/common-hal/busio/UART.c:332
+#: ports/nrf/common-hal/busio/UART.c:338 ports/nrf/common-hal/busio/UART.c:343
+#: ports/nrf/common-hal/busio/UART.c:348 ports/nrf/common-hal/busio/UART.c:352
+#: ports/nrf/common-hal/busio/UART.c:360
+#, fuzzy
+msgid "busio.UART not available"
 msgstr "busio.UART pas encore implémenté"
 
 #: ports/nrf/common-hal/microcontroller/Processor.c:49
@@ -2424,10 +2425,10 @@ msgstr "'S' et 'O' ne sont pas des types de format supportés"
 msgid "too many arguments provided with the given format"
 msgstr "trop d'arguments fournis avec ce format"
 
-#, fuzzy
-#~ msgid "value_size must be power of two"
-#~ msgstr "'len' doit être un multiple de 4"
-
 #, fuzzy
 #~ msgid "palette must be displayio.Palette"
 #~ msgstr "la palette doit être longue de 32 octets"
+
+#, fuzzy
+#~ msgid "value_size must be power of two"
+#~ msgstr "'len' doit être un multiple de 4"
diff --git a/ports/nrf/common-hal/busio/UART.c b/ports/nrf/common-hal/busio/UART.c
@@ -190,7 +190,7 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t
 }
 
 // Write characters.
-size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
+size_t common_hal_busio_uart_write (busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
     if ( nrf_uarte_tx_pin_get(self->uarte.p_reg) == NRF_UARTE_PSEL_DISCONNECTED ) {
         mp_raise_ValueError(translate("No TX pin"));
     }
@@ -315,49 +315,49 @@ void common_hal_busio_uart_construct (busio_uart_obj_t *self,
                                       const mcu_pin_obj_t * tx, const mcu_pin_obj_t * rx, uint32_t baudrate,
                                       uint8_t bits, uart_parity_t parity, uint8_t stop, uint32_t timeout,
                                       uint8_t receiver_buffer_size) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
 }
 
 bool common_hal_busio_uart_deinited (busio_uart_obj_t *self) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
     return true;
 }
 
 void common_hal_busio_uart_deinit (busio_uart_obj_t *self) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
 }
 
 // Read characters.
 size_t common_hal_busio_uart_read (busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
     return 0;
 }
 
 // Write characters.
 size_t common_hal_busio_uart_write (busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
     return 0;
 }
 
 uint32_t common_hal_busio_uart_get_baudrate (busio_uart_obj_t *self) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
     return self->baudrate;
 }
 
 void common_hal_busio_uart_set_baudrate (busio_uart_obj_t *self, uint32_t baudrate) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
 }
 
 uint32_t common_hal_busio_uart_rx_characters_available (busio_uart_obj_t *self) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
 }
 
 void common_hal_busio_uart_clear_rx_buffer (busio_uart_obj_t *self) {
 
 }
 
 bool common_hal_busio_uart_ready_to_tx (busio_uart_obj_t *self) {
-    mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));
+    mp_raise_NotImplementedError(translate("busio.UART not available"));
     return false;
 }
 #endif

Original file line number	Diff line number	Diff line change
`@@ -190,7 +190,7 @@ size_t common_hal_busio_uart_read(busio_uart_obj_t self, uint8_t data, size_t`
`190`	`190`	`}`
`191`	`191`
`192`	`192`	`// Write characters.`
`193`		`-size_t common_hal_busio_uart_write(busio_uart_obj_t self, const uint8_t data, size_t len, int *errcode) {`
	`193`	`+size_t common_hal_busio_uart_write (busio_uart_obj_t self, const uint8_t data, size_t len, int *errcode) {`
`194`	`194`	`if ( nrf_uarte_tx_pin_get(self->uarte.p_reg) == NRF_UARTE_PSEL_DISCONNECTED ) {`
`195`	`195`	`mp_raise_ValueError(translate("No TX pin"));`
`196`	`196`	`}`
`@@ -315,49 +315,49 @@ void common_hal_busio_uart_construct (busio_uart_obj_t *self,`
`315`	`315`	`const mcu_pin_obj_t * tx, const mcu_pin_obj_t * rx, uint32_t baudrate,`
`316`	`316`	`uint8_t bits, uart_parity_t parity, uint8_t stop, uint32_t timeout,`
`317`	`317`	`uint8_t receiver_buffer_size) {`
`318`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`318`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`319`	`319`	`}`
`320`	`320`
`321`	`321`	`bool common_hal_busio_uart_deinited (busio_uart_obj_t *self) {`
`322`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`322`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`323`	`323`	`return true;`
`324`	`324`	`}`
`325`	`325`
`326`	`326`	`void common_hal_busio_uart_deinit (busio_uart_obj_t *self) {`
`327`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`327`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`328`	`328`	`}`
`329`	`329`
`330`	`330`	`// Read characters.`
`331`	`331`	`size_t common_hal_busio_uart_read (busio_uart_obj_t self, uint8_t data, size_t len, int *errcode) {`
`332`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`332`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`333`	`333`	`return 0;`
`334`	`334`	`}`
`335`	`335`
`336`	`336`	`// Write characters.`
`337`	`337`	`size_t common_hal_busio_uart_write (busio_uart_obj_t self, const uint8_t data, size_t len, int *errcode) {`
`338`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`338`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`339`	`339`	`return 0;`
`340`	`340`	`}`
`341`	`341`
`342`	`342`	`uint32_t common_hal_busio_uart_get_baudrate (busio_uart_obj_t *self) {`
`343`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`343`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`344`	`344`	`return self->baudrate;`
`345`	`345`	`}`
`346`	`346`
`347`	`347`	`void common_hal_busio_uart_set_baudrate (busio_uart_obj_t *self, uint32_t baudrate) {`
`348`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`348`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`349`	`349`	`}`
`350`	`350`
`351`	`351`	`uint32_t common_hal_busio_uart_rx_characters_available (busio_uart_obj_t *self) {`
`352`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`352`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`353`	`353`	`}`
`354`	`354`
`355`	`355`	`void common_hal_busio_uart_clear_rx_buffer (busio_uart_obj_t *self) {`
`356`	`356`
`357`	`357`	`}`
`358`	`358`
`359`	`359`	`bool common_hal_busio_uart_ready_to_tx (busio_uart_obj_t *self) {`
`360`		`- mp_raise_NotImplementedError(translate("busio.UART not yet implemented"));`
	`360`	`+ mp_raise_NotImplementedError(translate("busio.UART not available"));`
`361`	`361`	`return false;`
`362`	`362`	`}`
`363`	`363`	`#endif`