Calling micrcontroller.reset on the Qualia (with 3.2" bar 820x320) causes reset into TinyUF2 Bootloader mode

[tyeth]

Note to self - Once fixed then update the learn guide code for qualia countdown clock 2024

CircuitPython version

9.1.1

Code/REPL

Adafruit CircuitPython 9.1.1 on 2024-07-22; Adafruit-Qualia-S3-RGB666 with ESP32S3
>>> 
>>> import microcontroller
>>> microcontroller.reset()

Behavior

TFTS3BOOT drive appears instead of CIRCUITPY

Description

No response

Additional information

No response

[bill88t]

Oh I know this. It's the double reset setting in tinyuf2.

// GPIO that implement 1-bit memory with RC components which hold the
// pin value long enough for double reset detection.
#define PIN_DOUBLE_RESET_RC   4

Furthermore, it seems in the latest commit (that modified this file) it was changed from IO5 to IO4.
adafruit/tinyuf2@da3eaf9

Defining this to a pin without the proper circuit leads to this exact behavior.
Suggestion: Transfer this issue to the TinyUF2 repo.

[tyeth]

Curiously I'm pretty sure I've been running firmware since that change, but to be fair I've no idea the actual last version I ran before 9.x

[bill88t]

Curiously I'm pretty sure I've been running firmware since that change, but to be fair I've no idea the actual last version I ran before 9.x

@tyeth The CircuitPython version has nothing to do with this. It's just the bug doesn't happen every time (it's a 80% from what I can tell).

CircuitPython resets correctly, but then the TinyUF2 bootloader performs the double reset check and (in most cases) succeeds, sending you to TinyUF2 instead of CircuitPython.

The TinyUF2 bootloader is also an updatable piece of firmware, you can view it's version from the info txt file in the TFTS3BOOT. (Maybe a wrong TinyUF2 version is installed? You might wanna post it.)

[tyeth]

Ahhh yeah good points, morning brain wasn't thinking bootloaders.
Not sure which versions I'm running on each, but probably 0.18.2 (definitely on this problematic one), and half aware that the bootloaders on circuitpython.org/downloads are often older than latest tinyuf2 releases (most are on 0.18.2).

My INFO_UF2.txt:

TinyUF2 Bootloader 0.18.2 - tinyusb (0.15.0-566-gf1e006d09)
Model: Adafruit Qualia ESP32-S3 RGB666
Board-ID: ESP32S3-Qualia-revC
Date: Mar 22 2024
Flash Size: 0x00200000 bytes

[bill88t]

The TinyUF2 version is recent and correct from the looks of it, so there isn't anything I can do to help you on from here.
I do not have the board to physically test and evaluate against the schematic.

[tannewt]

I'm unable to reproduce this. I can do microcontroller.reset() just fine. Does it happen with the latest main for you?

[tannewt]

@tyeth Please retest this.