Translations update from Hosted Weblate

locale/ID.po

@@ -871,6 +871,10 @@ msgstr "Deretan koordinat memiliki panjang yang berbeda"
 msgid "Coordinate arrays types have different sizes"
 msgstr "Tipe array koordinat memiliki ukuran yang berbeda"
 
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "Could not publish to ROS topic"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Tidak dapat mengatur alamat"
@@ -883,6 +887,11 @@ msgstr "Tidak dapat memulai interupsi, RX sibuk"
 msgid "Couldn't allocate decoder"
 msgstr "Tidak dapat mengalokasikan dekoder"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+#, c-format
+msgid "Critical ROS failure during soft reboot, reset required: %d"
+msgstr ""
+
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
 msgstr "Terjadi kesalahan saat menginisialisasi kanal DAC"
@@ -1312,6 +1321,10 @@ msgstr ""
 msgid "Invalid MAC address"
 msgstr ""
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "Invalid ROS domain ID"
+msgstr ""
+
 #: ports/espressif/common-hal/espidf/__init__.c py/moderrno.c
 msgid "Invalid argument"
 msgstr "Argumen tidak valid"
@@ -1874,6 +1887,10 @@ msgstr "Ukuran program tidak valid"
 msgid "Program too long"
 msgstr "Program terlalu lama"
 
+#: shared-bindings/rclcpy/Publisher.c
+msgid "Publishers can only be created from a parent node"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull tidak digunakan saat arah output."
@@ -1894,6 +1911,26 @@ msgstr "Kesalahan DeInit RNG"
 msgid "RNG Init Error"
 msgstr "Kesalahan Init RNG"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS failed to initialize. Is agent connected?"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS internal setup failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS memory allocator failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Node.c
+msgid "ROS node failed to initialize"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "ROS topic failed to initialize"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 #: ports/nordic/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "RS485"

locale/cs.po

@@ -865,6 +865,10 @@ msgstr "Pole souřadnic mají různé délky"
 msgid "Coordinate arrays types have different sizes"
 msgstr ""
 
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "Could not publish to ROS topic"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Není možné nastavit adresu"
@@ -877,6 +881,11 @@ msgstr "Nelze začít přerušení, RX je zaneprázdněn"
 msgid "Couldn't allocate decoder"
 msgstr "Dekodér nelze přiřadit"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+#, c-format
+msgid "Critical ROS failure during soft reboot, reset required: %d"
+msgstr ""
+
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
 msgstr "Chyba inicializace kanálu DAC"
@@ -1307,6 +1316,10 @@ msgstr "Chybné BSSID"
 msgid "Invalid MAC address"
 msgstr "Chybná MAC adresa"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "Invalid ROS domain ID"
+msgstr ""
+
 #: ports/espressif/common-hal/espidf/__init__.c py/moderrno.c
 msgid "Invalid argument"
 msgstr "Neplatný argument"
@@ -1864,6 +1877,10 @@ msgstr "Velikost programu je nesprávná"
 msgid "Program too long"
 msgstr "Program je příliš dlouhý"
 
+#: shared-bindings/rclcpy/Publisher.c
+msgid "Publishers can only be created from a parent node"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -1884,6 +1901,26 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS failed to initialize. Is agent connected?"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS internal setup failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS memory allocator failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Node.c
+msgid "ROS node failed to initialize"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "ROS topic failed to initialize"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 #: ports/nordic/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "RS485"

locale/de_DE.po

@@ -873,6 +873,10 @@ msgstr "Koordinaten-Arrays haben unterschiedliche Längen"
 msgid "Coordinate arrays types have different sizes"
 msgstr "Typen der Koordinaten-Arrays haben unterschiedliche Längen"
 
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "Could not publish to ROS topic"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Konnte Adresse nicht setzen"
@@ -885,6 +889,11 @@ msgstr "Interrupt konnte nicht gestartet werden, RX beschäftigt"
 msgid "Couldn't allocate decoder"
 msgstr "Decoder konnte nicht zugeordnet werden"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+#, c-format
+msgid "Critical ROS failure during soft reboot, reset required: %d"
+msgstr ""
+
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
 msgstr "DAC-Kanal-Initialisierungsfehler"
@@ -1043,7 +1052,8 @@ msgstr "Erstellen kontinuierlicher Kanäle fehlgeschlagen: ungültiges Argument"
 
 #: ports/espressif/common-hal/audioio/AudioOut.c
 msgid "Failed to create continuous channels: invalid state"
-msgstr "Kontinuierliche Kanäle konnten nicht erstellt werden: ungültiger Status"
+msgstr ""
+"Kontinuierliche Kanäle konnten nicht erstellt werden: ungültiger Status"
 
 #: ports/espressif/common-hal/audioio/AudioOut.c
 msgid "Failed to create continuous channels: no mem"
@@ -1323,6 +1333,10 @@ msgstr "Ungültige BSSID"
 msgid "Invalid MAC address"
 msgstr "Ungültige MAC-Adresse"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "Invalid ROS domain ID"
+msgstr ""
+
 #: ports/espressif/common-hal/espidf/__init__.c py/moderrno.c
 msgid "Invalid argument"
 msgstr "Ungültiges Argument"
@@ -1892,6 +1906,10 @@ msgstr "Programm-Größe ist ungültig"
 msgid "Program too long"
 msgstr "Programm zu lang"
 
+#: shared-bindings/rclcpy/Publisher.c
+msgid "Publishers can only be created from a parent node"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull wird nicht verwendet, wenn die Richtung output ist."
@@ -1912,6 +1930,26 @@ msgstr "RNG DeInit-Fehler"
 msgid "RNG Init Error"
 msgstr "RNG-Init-Fehler"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS failed to initialize. Is agent connected?"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS internal setup failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS memory allocator failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Node.c
+msgid "ROS node failed to initialize"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "ROS topic failed to initialize"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 #: ports/nordic/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "RS485"

locale/el.po

@@ -871,6 +871,10 @@ msgstr ""
 msgid "Coordinate arrays types have different sizes"
 msgstr ""
 
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "Could not publish to ROS topic"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Δεν μπόρεσε να ρυθμιστεί η διεύθυνση"
@@ -883,6 +887,11 @@ msgstr "Δεν μπόρεσε να εκκινηθεί το interrupt, RX κατ
 msgid "Couldn't allocate decoder"
 msgstr "Δεν μπόρεσε να δεσμευτεί decoder"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+#, c-format
+msgid "Critical ROS failure during soft reboot, reset required: %d"
+msgstr ""
+
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
 msgstr "Σφάλμα εκκίνησης καναλιού DAC"
@@ -1313,6 +1322,10 @@ msgstr ""
 msgid "Invalid MAC address"
 msgstr ""
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "Invalid ROS domain ID"
+msgstr ""
+
 #: ports/espressif/common-hal/espidf/__init__.c py/moderrno.c
 msgid "Invalid argument"
 msgstr ""
@@ -1869,6 +1882,10 @@ msgstr ""
 msgid "Program too long"
 msgstr ""
 
+#: shared-bindings/rclcpy/Publisher.c
+msgid "Publishers can only be created from a parent node"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr ""
@@ -1889,6 +1906,26 @@ msgstr ""
 msgid "RNG Init Error"
 msgstr ""
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS failed to initialize. Is agent connected?"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS internal setup failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS memory allocator failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Node.c
+msgid "ROS node failed to initialize"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "ROS topic failed to initialize"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 #: ports/nordic/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "RS485"

locale/en_GB.po

@@ -865,6 +865,10 @@ msgstr "Coordinate arrays have different lengths"
 msgid "Coordinate arrays types have different sizes"
 msgstr "Coordinate arrays types have different sizes"
 
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "Could not publish to ROS topic"
+msgstr ""
+
 #: shared-bindings/_bleio/Adapter.c
 msgid "Could not set address"
 msgstr "Could not set address"
@@ -877,6 +881,11 @@ msgstr "Could not start interrupt, RX busy"
 msgid "Couldn't allocate decoder"
 msgstr "Couldn't allocate decoder"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+#, c-format
+msgid "Critical ROS failure during soft reboot, reset required: %d"
+msgstr ""
+
 #: ports/stm/common-hal/analogio/AnalogOut.c
 msgid "DAC Channel Init Error"
 msgstr "DAC channel init error"
@@ -1306,6 +1315,10 @@ msgstr "Invalid BSSID"
 msgid "Invalid MAC address"
 msgstr "Invalid MAC address"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "Invalid ROS domain ID"
+msgstr ""
+
 #: ports/espressif/common-hal/espidf/__init__.c py/moderrno.c
 msgid "Invalid argument"
 msgstr "Invalid argument"
@@ -1865,6 +1878,10 @@ msgstr "Program size invalid"
 msgid "Program too long"
 msgstr "Program too long"
 
+#: shared-bindings/rclcpy/Publisher.c
+msgid "Publishers can only be created from a parent node"
+msgstr ""
+
 #: shared-bindings/digitalio/DigitalInOut.c
 msgid "Pull not used when direction is output."
 msgstr "Pull not used when direction is output."
@@ -1885,6 +1902,26 @@ msgstr "RNG deinit Error"
 msgid "RNG Init Error"
 msgstr "RNG init Error"
 
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS failed to initialize. Is agent connected?"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS internal setup failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/__init__.c
+msgid "ROS memory allocator failure"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Node.c
+msgid "ROS node failed to initialize"
+msgstr ""
+
+#: ports/espressif/common-hal/rclcpy/Publisher.c
+msgid "ROS topic failed to initialize"
+msgstr ""
+
 #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
 #: ports/nordic/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
 msgid "RS485"