[sme] Adding GDB scripts

Author: aethaniel

hardware/arduino/samd/variants/AMEL_SmartEverything/debug_scripts/variant_atmel_ice.gdb

@@ -0,0 +1,31 @@
+#
+#  SmartEverything SAM-ICE OpenOCD script.
+#
+#  Copyright (c) 2015 Amel-Tech (a division of Amel Srl). All right reserved.
+#
+#  This library is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU Lesser General Public
+#  License as published by the Free Software Foundation; either
+#  version 2.1 of the License, or (at your option) any later version.
+#
+#  This library is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#  See the GNU Lesser General Public License for more details.
+#
+#  You should have received a copy of the GNU Lesser General Public
+#  License along with this library; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+
+# Define 'reset' command
+define reset
+
+info reg
+
+break main
+
+# End of 'reset' command
+end
+
+target remote | openocd -c "interface cmsis-dap" -c "set CHIPNAME at91samd21j18" -f target/at91samdXX.cfg -c "gdb_port pipe; log_output openocd.log"

hardware/arduino/samd/variants/AMEL_SmartEverything/debug_scripts/variant_sam_ice.gdb

@@ -0,0 +1,31 @@
+#
+#  SmartEverything SAM-ICE OpenOCD script.
+#
+#  Copyright (c) 2015 Amel-Tech (a division of Amel Srl). All right reserved.
+#
+#  This library is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU Lesser General Public
+#  License as published by the Free Software Foundation; either
+#  version 2.1 of the License, or (at your option) any later version.
+#
+#  This library is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#  See the GNU Lesser General Public License for more details.
+#
+#  You should have received a copy of the GNU Lesser General Public
+#  License along with this library; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+
+# Define 'reset' command
+define reset
+
+info reg
+
+break main
+
+# End of 'reset' command
+end
+
+target remote | openocd -c "interface jlink" -c "set CHIPNAME at91samd21j18" -f target/at91samdXX.cfg -c "gdb_port pipe; log_output openocd.log"