Plutosdr-fw: Submodule update * Linux, HDL: Switch to 2021_R2 branches * Buildroot update to master, which previously merged master-next Submodule buildroot 6d681cb..0081bbc: > Merge pull request #79 from analogdevicesinc/master-next > board/pluto: Add support for Android USB Tethering > configs: zynq_[pluto|m2k]_defconfig: Switch to buildroot toolchain Submodule hdl d09fc92...e5660db: > fmcadc5: Fix issue created by modifying ad_disconnect > projects/adrv9009zu11eg: Fix lane swap on tx1_c when used with fmcomms8 > scripts: adi_board: Update ad_disconnect procedure > ad9081: vck190: Update default profile > projects: Fix intermitent timing violation on a10soc > Remove extra FIELD marker in regmap > regmap/adi_regmap_common.txt: Add missing RD_RAW_DATA field > docs/regmap: Added the new ADDRESS_HIGH registers to the DMAC regmap > axi_dmac: Add suport for 64 bit address width New improvements for the ADI DMAC IP: 1)The capability to manually overwrite the DMA_AXI_ADDR_WIDTH(from GUI or from tcl) 2)DMA_AXI_ADDR_WIDTH attribute is now visible in the Vivado GUI: -"Auto mode": Automatically calculated by the core tcl files based on the existing attached address segments. -"Manual mode": Specify the desired dma_width between 32-64 bits. 3)Added two new debug registers that return higher part of the current source/destination address. > ad9081_fmca_ebz_x_band:zcu102: X band project initial version > ad9083 based projects: Expose JESD parameters > ad9083_vna: Init commit > up_adc_common: Update IPs and adi_regmap_adc definition file to latest up_adc_common module > up_adc_common: Add register data reading/writing functionality > up_adc_channel: Update IPs and adi_regmap_adc definition file to latest up_adc_channel module > common/up_adc_channel: Add raw data reading functionality > projects/common: Add build files templates carriers. Modified Quartus Versions > cn0506: Update project's directory name in the README file > adrv9009zu11eg/common/adrv9009zu11eg_bd: Add logic for TX_JESD_L=4 > adrv9009/common/adrv9009_bd: Add logic for TX_JESD_L=2 > projects/fmcomms8: Expose jesd params, add support for TX_JESD_L=4 > projects/cn0501: Updated with axi_ad7768 IP for Coraz7s > The memory interconnect was moved from HP0 to HP1 on Coraz7s projects (#1023) > ad719x_asdz/coraz7s: Initial commit > run_tb.sh:don't run xsim if previous commands fail > library/jesd204/ad_ip_jesd204_tpl_adc: Added support for PN7 and PN15 (#1019) > ad4630_fmc: Match project name with folder name > ad9783_ebz: Match project name with folder name > projects/adrv9009zu11eg: expose jesd params to make and add FMCOMMS8 parameter > library/scripts/library.mk: clean files form tb > coraz7s: Memory interconnect fix (#1014) > docs/regmap: Added ADI regmap_*.txt files (#1008) > axi_ltc2387: Update up_adc_common and up_adc_channel instances > axi_ltc2387: Make adc_valid to represent the current sample > cn0577/zed: Update xdc to diff_term true. Disable csn in system_top > projects/common: Add system_top _project templates > docs: Add common template for evaluation board specific fmc files > projects/scripts: Add fmc constraints generator script > projects: Add fmc connection files for eval boards > projects/common: Add fmc connection files for every platform > projects: starndadize the jesd make parameters > scripts/check_readme: Change search to be case insensitive > common/tb/ad_pack_tb: Add non random scenario as first test for easier debug > ad9082_fmca_ebz/zcu102: Make TPL width overwritable > axi_jesd204: Cleanup unused parameter > axi_jesd204_rx/jesd204_up_rx: Set buffer delay in beats of device clock > ad9081_fmca_ebz: Make TPL width overwritable > library/jesd204: Add support for a gearbox ratio in which the TPL width is smaller than the PHY interface > library/jesd204: Update the script which computes the TPL width to be able to assign custom values > ad9081_fmca_ebz/common: Use the script to compute the TPL width > adi_pd.tcl: Fix sysid branch string > projects: Fix some Makefiles > scripts:adi_env: Change the default version of Quartus Standard to 21.1 (#996) > Added axi_ad7768 IP Core (#989) > library/scripts/adi_ip_xilinx.tcl: remove duplicate adi_env.tcl source > scripts:adi_env: Change the default version of Quartus Pro to 21.4 (#988) > scripts: Set required Vivado version only in adi_env.tcl > scripts: Update Vivado version to 2021.2 > library/common: Enable automatic logging of simulation output > library/common: Update the packing IPs to be more generic > AD777x support for ZedBoard and DE10Nano (#937) > axi_ltc2387: Update data formatter instance to use bits instead of octets > jesd204/ad_ip_jesd204_tpl_adc: Fix data formater for N'=12 if DMA interface is also 12 > scripts: Merge adi_env.tcl into a single file > library/jesd204: Updated jesd to support more lanes Modified the maximum number of supported lanes up to 32 lanes for every JESD layer > ad9081_fmca_ebz/vck190: Expose ref clock parameter > ad9081_fmca_ebz/common/versal_transceiver: Separate lane rates for Tx and Rx > ad9082_fmca_ebz/zcu102: Make JESD_MODE overwritable > util_do_ram: Fix Rx path for interrupted transfers > util_axis_fifo_asym: Fixes for simulation > data_offload: Fix Tx bypass > adi_pd.tcl: Fix git_clean_string logic > cn0561_coraz7s: Fix gpio connections > sysid: Add sysid support for de10nano > ad9082_fmca_ebz/zc706: Fix parameters > ad9082_fmca_ebz/vcu118: Fix default lane rate parameter > ad9082_fmca_ebz/zcu102: Fix default lane rate parameter > data_offload: Increase bypass FIFO size > ad9081_fmca_ebz: Reset cpack with Rx data offload > vcu128: Connect sys_mb_rstgen/ext_reset_in accordingly > ad_ip_jesd204_tpl_adc_hw.tcl: Add 14 bit option for converter resolution > scripts/adi_project_xilinx.tcl: Add new constraints file support > Merge CN0506 projects into a parameterized one < util_do_ram: Fix Rx path for interrupted transfers < util_axis_fifo_asym: Fixes for simulation < data_offload: Fix Tx bypass < sysid: Add sysid support for de10nano > action: Add workflow for github action to run check_guideline.py > script: Add Py script to check for guideline rules & README.md > projects: Update .v files according to guideline > libraries: Update modules according to guideline > lint: Update to run only in PRs. Change version for checkout action > ad9081_fmca_ebz: a10soc: Update resistor change comment > .gitignore: ignore files generated by Quartus & Platform Designer Added the files generated by Quartus Pro 21.2, 20.1 and Platform Designer for each of the versions. The files added are generated and removed by make. > ad_quadmxfe1_ebz/vcu118/system_project.tcl: Update comments > ad_fmclidar1_ebz:a10soc Fixed problems with SPI communication with AD9094 (#951) > projects:daq2:common: fix adi_tpl_jesd204_rx_create error. (#952) > .gitignore: Fix to ignore imbricated bd.tcl files too > PN mismatch DAQ2, DAQ3 and FMCJESDADC1 fix (#950) Submodule linux 9dfba10...3eae700: > ci: don't fail ci build over changed defconfig > ci: add new internal function to setup git account > arch: arm: configs: explicitly disable gcc-plugins > microblaze: dts: Update compatible xlnx,axi-iic-2.1 > arch: arm64: adrv9009-zu11eg: Update hmc7044_ext > iio: adc: adrv9002: fix mixed declarations and code in the API > iio: adc: adrv9002: fix unused variable warning in the API > iio: adc: adrv9002: fix api usage of 'printf()' > firmware: Update firmware for adrv9002 > iio: adc: adrv9002: Update API to 68.0.6 > iio: adc: ad7124: fix sequencer support > iio: adc: ad4630: reset averaging on test_pattern mode > iio: adc: ad4630: add missing test_pattern channel > arch: arm: boot: dts: fix ad4630 hdl tag > iio: kconfig.adi: imply AD4630 > arch: arm: boot: dts: Add ad4630-24 dts > Documentation: ABI: testing: Add ad4630 sysfs description > drivers: iio: adc: add support for ad4630 > dt-bindings: iio: adc: Add docs for ad4630 > hwmon: (ltc2947) fix temperature scaling > iio: dac: ltc2688: fix voltage scale read > arch: arm: boot: dts: Fix cn0506 socfpga DT > net: ethernet: stmicro: stmmac_main: Fix mode mask > net: phy: adin: add support for clock output > dt-bindings: net: adin: document phy clock output properties > arch: arm: dts: arria10_adrv9002: Devices names inconsistency > arch: arm: dts: add devicetree for ADAQ8092 > drivers: iio: Kconfig.adi: add ADAQ8092 > iio:adc:adaq8092: add support for ADAQ8092 > dt-bindings: iio: adc: add ADAQ8092 doc > iio: frequency: ad9172: Fix jesd204-fsm final state transition > media: xilinx: xilinx-hdmirxss: fix 64bit division on 32bit archs > clkk: clk-xlnx-clock-wizard-v: fix 64bit division on 32bit archs > clk: clk-xlnx-clock-wizard: fix 64bit division on 32bit archs > include: linux: remoteproc: fix 'da_to_va()' type > pwm: pwm-sti: fix 64bit division on 32bit architectures > iio: adc: adi-axi-adc: fix compilation > spi: spi-bcm2835: fix compilation > usb: phy: phy-ulpi.c: sync with upstream > clk: clk-xlnx-clock-wizard-v: fix missing bitfield include > clk: clk-xlnx-clock-wizard: fix missing bitfield include > Kconfig.adi: imply AD74115 > iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl > iio: addac: add AD74115 driver > dt-bindings: iio: addac: add AD74115 > iio: addac: ad74413r: add support for reset-gpio > dt-bindings: iio: ad74413r: add optional reset-gpios > iio: addac: ad74413r: add spi_device_id table > watchdog: dw_wdt: stop on reboot > watchdog: stop wdd when watchdog hw running in reboot_notifier > iio: adc: adrv9002: add spi id_table support > iio: adc: adrv9002: add myself as MODULE_AUTHOR > iio: adc: adrv9002: move OF specific code to it's own file > iio: adc: adrv9002: Re-order function declarations > iio: adc: adrv9002: always select CF_AXI_ADC > iio: adc: adrv9002: constify where possible > iio: adc: adrv9002: add helper to get hop table > iio: adc: adrv9002: add helper to set carrier frequency > iio: adc: adrv9002: add helper to get/set hardware gain > iio: adc: adrv9002: improve IIO read/write() callbacks code flow > iio: adc: adrv9002: remove meaningless '__maybe_unused' > iio: adc: adrv9002: add macro to wrap api calls > iio: adc: adrv9002: drop custom, repeated macros > iio: adc: adrv9002: small improvement on profile read > iio: adc: adrv9002: remove sysfs bin attrs size check > iio: adc: adrv9002: add comment on why 'hop_tbl' is static > iio: adc: adrv9002: fix possible data race > iio: adc: adrv9002: properly return error code > iio: adc: adrv9002: properly set gain table type > net: usb: smsc95xx: fix external PHY reset > drivers: iio: accel: Add support for ADXL359 device > dt-bindings: iio: accel: Add docs for ADXL359 > drivers: iio: accel: Use warning if invalid device id is detected > iio: adc: ad4130: depend on GPIOLIB > Documentation: ad4130: format list of in_voltage-voltage_filter_mode_available modes > iio: adc: ad4130: Fix spelling mistake "diffreential" -> "differential" > iio: temperature: ltc2983: support more parts > dt-bindings: iio: temperature: ltc2983: support more parts > dt-bindings: iio: temperature: ltc2983: use generic node name in example > dt-bindings: iio: temperature: ltc2983: describe broken mux delay property > dt-bindings: iio: temperature: ltc2983: refine descriptions > dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors > dt-bindings: iio: temperature: ltc2983: require 4 wire rtd for current rotate > dt-bindings: iio: temperature: ltc2983: require custom sensor tables > dt-bindings: iio: temperature: ltc2983: describe matrix items > dt-bindings: iio: temperature: ltc2983: remove qutations from phandle ref > dt-bindings: iio: temperature: ltc2983: use hex for sensor address > dt-bindings: iio: temperature: ltc2983: add default values > iio: temperature: ltc2983: make bulk write buffer DMA-safe > iio: temperature: ltc2983: allocate iio channels once > dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes > iio: temperature: ltc2983: Make use of device properties > iio: temperature: ltc2983: Use single error path to put OF node > iio: temperature: ltc2983: Don't hard code defined constants in messages > iio: ltc2983: fail probe if no channels are given > iio: ltc2983: add support for optional reset gpio > iio: ltc2983: fix device probe > net: ethernet: adi: adin1110: Fix notifiers > Kconfig.adi: imply AD4130 > iio: adc: ad4130: add AD4130 driver > dt-bindings: iio: adc: add AD4130 > dt-bindings: net: adin1110: Document reset > net: ethernet: adi: adin1110: add reset GPIO > net: ethernet: adi: adin1110: Fix SPI transfers > net: ethernet: adi: adin1110: Add check in netdev_event > drivers: jesd204 :jesd204-core: copy_link_params() sysref param fix > iio: adis: add '__adis_enable_irq()' implementation Add '__adis_enable_irq()' implementation which is the unlocked version of 'adis_enable_irq()'. Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from '__adis_intial_startup()' to keep the expected unlocked functionality. > iio: addac: ad74413r: fix integer promotion bug in ad74413_get_input_current_offset() > arch: arm: boot: dts: Add devicetree for ltc2387 > drivers: iio: adc: Add support for LTC2387 > dt-bindings: iio: adc: Add docs for ltc2387 > arm: dts: Add ad9083_a10soc Development Kit support > arch: arm64: boot: dts: update stingray HDL tags > arch: microblaze: dts: Add sysid support vcu118 > arch: arm: dts: de10nano: add sysid support > iio: kconfig.adi: imply MAX11410 > Documentation: ABI: testing: add max11410 doc > dt-bindings: iio: adc: add adi,max11410.yaml > iio: adc: add max11410 adc driver > arm64: zynqmp-zcu102-rev10-stingray: Update ADAR1000s labels > arm64: zynqmp-zcu102-rev10-stingray: Disable the one shot mode > arm64: zynqmp-zcu102-rev10-stingray: Provide all 4 available options > arm64: zynqmp-zcu102-rev10-stingray: Update stingray_control > iio: adc: adrv9002: add support for external LOS > arch: arm64: dts: fix adrv9002 ref clock property > arch: arm: dts: fix adrv9002 ref clock property > arch: arm: dts: fix incorrect DMA address range > arch: arm: dts: add zedboard ad4134 > Kconfig.adi: imply AD4134 driver > iio: adc: ad4134: add AD4134 driver > dt-bindings: iio: adc: add AD4134 > kconfig.adi: make use of imply keyword > clk: kconfig.adi: make use of imply keyword > hwmon: kconfig: make use of imply keyword > iio: kconfig.adi: make use of imply keyword > input: kconfig.adi: make use of imply keyword > media: kconfig.adi: make use of imply keyword > usb: kconfig.adi: make use of imply keyword > soc: codecs: kconfig: make use of imply keyword > drivers: spi: spi-axi-spi-engine: Increase buffer > drivers: spi: spi-axi-spi-engine: Add word delay > drivers: spi: spi-axi-spi-engine: Add BPW mask > arch: arm64: dts: fmcbridge: update hdl tag > net: ethernet: adi: adin1110: sync with upstream > iio: adc: adrv9002: improve debugfs enablement delays reading > iio: adc: adrv9002: drop 'bin_attr_sz' variable > iio: adc: adrv9002: simplify probing > iio: adc: adrv9002: make use of read_poll_timeout() > iio: adc: adrv9002: fix enablement delays validations > arch/arm/boot/dts: a10soc_ad9136 dts: add hdl tag > arch: arm64: dts: xmicrowave: fix hdl tag > dts: xilinx/zynqmp-zcu102-rev10-adrv9009-tx-l2: Add dts for TX lanes=2 > dts: zynqmp-adrv9009-zu11eg-fmcomms8-tx-l8: Add dts for TX lanes=8 > dts: zynqmp-zcu102-rev10-adrv9009-fmcomms8-tx-l4: Add dts for TX lanes=4 > dts: zynqmp-adrv9009-zu11eg-tx-l4: Add dts for TX lanes=4 > dts: zynq-zc706-adv7511-adrv9009-tx-l2: Add dts for TX lanes=2 > CI: install GitPython for checkpatch > iio: filter: admv8818: fix out-of-bounds read > iio: adc: adrv9002: remove check for " CI:fix push to Artifactory > CI: update upload_to_artifactory.py > drivers: iio: adc: Rename the LTC2499 iio device > drivers: iio: adc: LTC2499 support > Add MAINTAINERS entries for LTC2497 and LTC2496 > dt-bindings: iio: adc: Add docs for LTC2499 > Remove duplicate matching entry > iio: ltc2497: Fix reading conversion results > dt-bindings: iio: adi,ad7923: add adi,range-double property > iio: adc: ad7923: support extended range > iio: adc: ad7923: fix channel readings for some variants > iio: dac: ad5593r: Fix i2c read protocol requirements > drivers: iio: accel: adxl312 and adxl314 support > dt-bindings: iio: accel: adxl313: Add compatibles for adxl312 and adxl314 > iio: buffer: dmaengine: make iio_dmaengine_buffer_alloc() private > misc: mw_stream_iio_channel: make use of devm_iio_dmaengine_buffer_alloc() > iio: frequency: m2k-dac: move to device managed probe > iio: dac: cf_axi_dds: move to device managed probe > iio: adc: cf_axi_adc_core: move to device managed probe > iio: adc: admc_speed: move to device managed probe > iio: adc: admc_adc: move to device managed probe > iio: adc: ad_adc: move to device managed probe > iio: adc: ad7768-1: make use of devm_iio_dmaengine_buffer_alloc() > iio: adc: ad400x: move to device managed probe > iio: logic: m2k-logic-analyzer: make use of devm_iio_dmaengine_buffer_alloc() > iio: adc: ad7768-1: fix hardware buffer allocation > README: update links > dts: socfpga_arria10_socdk_cn0506: update HDL tag > dts: zynqmp-zcu102-rev10-cn0506: update HDL tag > dts: zynq-zed-adv7511-cn0506: update HDL tag > dts: zynq-zc706-adv7511-cn0506: update HDL tag > arch: arm64: config: update adi configuration > Merge tag 'xilinx-v2021.2' of https://github.com/Xilinx/linux-xlnx.git > CI:fix push to Artifactory > spi: spi-xilinx: Fix bits_per_word_mask > arch: arm64: dts: add adrv9003 devicetrees > arch: arm: dts: add adr9003 devicetrees > arch: arm64: adi_zynqmp_defconfig: add adrv9003 profiles > arch: arm: zynq_xcomm_adv7511_defconfig: add adrv9003 profiles > firmware: add adrv9003 default profiles > iio: adc: adrv9002: support adrv9003 > dmaengine: axi-dmac: check cache coherency register > dts: zynqmp-zcu102-rev10-ad9082-204c-txmode36-rxmode28: New use case > drivers: iio: Kconfig.adi: add ADXL313 > CI:change date format in rpi_git_properties.txt > iio: adc: ad9371: Fix device attribute calibrate read return value > iio: adc: adrv9009: Fix device attribute calibrate read return value > zcu102_ad9695.dts: update hdl tag > arch: arm64: dts: adrv9002: Fix/Update TX DMA interrupt > iio: adc: ad9467: don't prepare clk for ad9250 > dts: zynq-zc706-adv7511-ad9081-np12.dts: Fix axi_jesd204_[rx|tx] clocks > spi: spi-zynzmp-gqspi: Increase timeout interval during data transfer > spi: spi-zynq-gqspi: Set appropriate tapdelay during driver initialization > spi: spi-zynqmp-gqspi: Fix the zynqmp qspi driver call to get the spi controller devdata > spi: spi-zynqmp-gqspi: Fix chipselect timeout issue > Revert "spi: spi-zynqmp-gqspi: Check for TXFIFO Empty before transfer complete" > adi-axi-data-offload: Deprecate sample counter > adi-axi-data-offload: Use one hot encoded states > arm: dts: add socfpga_cyclone5_de10_nano_hps > arch: arm64: dts: stingray: use custom model name > iio: adc: ad9081: API Version 1.3.1 > dts: zynqmp-zcu102-rev10-ad9082-204c-txmode22-rxmode23-dual: Add example > iio: adc: ad9081: Devicetree support for SERDES controls > jesd204:axi_adxcvr.c Rate debug message > iio:jesd204:xilinx_transceiver.c: Fix function type (static function) > iio: adc: adrv9002: fix tdd rate calculation > iio: adc: adrv9002: refactor 'adrv9002_parse_dt()' > dt-bindings: iio: adrv9002: remove non existent defines > iio: adc: adrv9002: fix frequency hopping when no gpios are set > iio: adc: adrv9002: fix tdd clock export > arm64: dts: zynqmp-zcu102-rev10-ad9082-m4-l8.dts: Fix ref clock > arm: dts: arria10_ad9081: Fix device_clk linking > arm64: dts: adrv9009-zu11eg-fmcomms8: Added coarse delays > iio: adc :ad9081: Dual link support for bist_prbs_error_counters_jrx > drivers: pwm: axi-pwmgen: Add PWM ops > Documentation: ABI: testing: pwm: Add time_unit > drivers: pwm: axi-pwmgen: Add time unit support > Documentation: driver-api: pwm.rst: Add time_unit > drivers: pwm: core: Add PWM time unit > include: linux: pwm.h: Fix pwm_apply_args > Documentation: pwm: Add phase documentation > drivers: pwm: sysfs: Add phase sysfs > include: linux: pwm: Convert phase to u64 > pwm: Convert period and duty cycle to u64 > drivers: pwm: axi-pwmgen: Rename offset > include: linux: pwm.h: Rename offset > drivers: usb: chipidea: Let the PHY set VBUS > arch: arm: boot: dts: Remove unused usb-phy > iio: adc: adrv9009: Provide InitCal status upon error > iio: adc: talise: Fix corner case in reference clock handling < arch: arm: boot: dts: zed+ad4630: update hdl tag > serial: max310x: implement I2C support > serial: max310x: make accessing revision id interface-agnostic > serial: max310x: use a separate regmap for each port > serial: max310x: use regmap methods for SPI batch operations > serial: max310x: Make use of device properties > serial: max310x: unregister uart driver in case of failure and abort > Revert "serial: max310x: pass return value of spi_register_driver" > Revert "serial: max310x: rework RX interrupt handling" < dts: vcu118_ad9081.dts: Add axi-data-offload engine support < dts: vcu128_ad9081.dts: Fix axi-data-offload node names < iio: jesd204: xilinx_transceiver.c: Fix error handling < drivers: iio: addac: one-bit-adc-dac: Remove unused var < drivers: iio: addac: one-bit-adc-dac: Fix read_label() < arch: arm: boot: dts: Add ad4630-24 dts < drivers: iio: adc: AD4630 < Documentation: ABI: testing: Add ad4630 sysfs description < dt-bindings: iio: adc: Add docs for ad4630 < drivers: pwm: axi-pwmgen: Add PWM ops < Documentation: ABI: testing: pwm: Add time_unit < drivers: pwm: axi-pwmgen: Add time unit support < Documentation: driver-api: pwm.rst: Add time_unit < drivers: pwm: core: Add PWM time unit < include: linux: pwm.h: Fix pwm_apply_args < Documentation: pwm: Add phase documentation < drivers: pwm: sysfs: Add phase sysfs < include: linux: pwm: Convert phase to u64 < pwm: Convert period and duty cycle to u64 < drivers: pwm: axi-pwmgen: Rename offset < include: linux: pwm.h: Rename offset < drivers: usb: chipidea: Let the PHY set VBUS < arch: arm: boot: dts: Remove unused usb-phy > iio: adc: ad9081: Remove "adi_utils.h" include > iio: adc: ad9081: Updates for API v1.3.0 > iio: adc: ad9081: API Version 1.3.0 > iio: jesd204: xilinx_transceiver.c: Fix error handling > iio: frequency: ad9528: Support for GPIO trigger SYSREF requests < arch: arm : boot: dts: set vcxo to 100 MHz > arch: arm : boot: dts: set vcxo to 100 MHz < arch: arm: dts: de10nano: add sysid support < zynqmp-zcu102-rev10-ad9082: fix HDL project tag < arch: arm: boot: dts: rename SPI Engine AXI CLKGEN > microblaze: boot: dts: Remove redundant axi-dmac channel nodes > microblaze: dts: adi-fmcjesdadc1.dtsi: Fix reg format warning > dts: vcu118_quad_ad908*: Add HDL Synthesis Parameters comments > dts: microblaze: vcu118_quad_ad908*: Fix typo ADRF4360 -> ADF4371 > dts: vcu128_ad9081.dts: Fix axi-data-offload node names > dts: vcu118_ad9081.dts: Add axi-data-offload engine support > dts: vcu118_ad9081.dts: Drop redundant axi-dmac channel nodes > drivers: iio: addac: one-bit-adc-dac: Remove unused var > drivers: iio: addac: one-bit-adc-dac: Fix read_label() > arch: arm: boot: dts: rename SPI Engine AXI CLKGEN > iio: adc: ad9371_conv: Remove useless variable > dts: adrv9009/8: Fix JESD204 ADC/DAC TPL Core mappings > dts: ad9371: Fix JESD204 ADC/DAC TPL Core mappings > iio: adc: ad9371_conv: Remove DAC Core settings from the ADC TPL Core > iio: adc: adrv9009_conv: Remove DAC Core settings from the ADC TPL Core > iio: adc: ad9371_conv.c: Remove unused ad9371_hdl_loopback function > iio: adc: adrv9009_conv.c: Remove unused adrv9009_hdl_loopback function > iio: adrv9002: api fix mixed code declarations warnings > iio: adrv9002: api: do no use floating points > iio: adrv9002: api: fix stdlib includes and misc warnings > firmware: Update firmware for adrv9002 > iio: adrv9002: Update API to 67.1.1 > zynqmp-zcu102-rev10-ad9082: fix HDL project tag > drivers: iio: ad9467: fix ad9625 scale handling > CI:set 'exit 1' if timestamp folder is not found > drivers: iio: ad9467: fix ad9649 scale handling > CI:add z option to tar archive > iio: frequency: adf4371: Fix Lock Detect bit reading Signed-off-by: Michael Hennerich

Adding timestamping to PlutoSDR firmware #79

Description

Metadata

Metadata

Assignees

Labels

Type

Projects

Milestone

Relationships

Development

Issue actions