diff --git a/doc/source/_static/dpf_operators.html b/doc/source/_static/dpf_operators.html
index c6f82b85d36..fd96d6d8a80 100644
--- a/doc/source/_static/dpf_operators.html
+++ b/doc/source/_static/dpf_operators.html
@@ -2081,7 +2081,7 @@ <h2 class="h2-main">Configurating operators</h2>
  Get the XX normal component (00 component)."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files.. Will only be used if no displacement input is given (will be applied on displacement operator)." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="scoping" n="1" doc="The element scoping on which the result is computed." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="Optional if a mesh or a data_sources have been connected. Required if no displacement input have been connected." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Optional if a mesh or a streams_container have been connected, or if the displacement's field has a mesh support. Required if no displacement input have been connected." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="extrapolate" n="5" doc="Whether to extrapolate the data from the integration points to the nodes." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="nonlinear" n="6" doc="Whether to use nonlinear geometry or nonlinear material (1 = large strain, 2 = hyperelasticity)." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="abstract_meshed_region" n="7" doc="The underlying mesh. Optional if a data_sources or a streams_container have been connected, or if the displacement's field has a mesh support." types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="Average the Elemental Nodal result to the requested location." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="displacement" n="10" doc="Field/or fields container containing only the displacement field (nodal). If none specified, read displacements from result file using the data_sources." types="fields_container field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="The computed result fields container (elemental nodal)." types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="compute_total_strain_X" license="none" cat="result" plugin="live post" cpp-name="compute_total_strain_X"></scripting-part></div><div class="operator" id="forward" scripting_name="forward"plugin="core"cat="utility"><h1 class="op-des-h1">utility: forward</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Return all the inputs as outputs."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="any" n="0" doc="any type of input" types="any" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="any" n="0" doc="same types as inputs" types="any" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="read_inputs_in_parallel" default="false" doc="If this option is set to true, the operator's inputs will be evaluated in parallel." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="forward" license="none" cat="utility" plugin="core" cpp-name="forward"></scripting-part></div><div class="operator" id="plastic strain eqv" scripting_name="plastic_strain_eqv"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain eqv</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal equivalent plastic strain by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_eqv" license="none" cat="result" plugin="core" cpp-name="EPPL_EQV"></scripting-part></div><div class="operator" id="gasket inelastic closure XY" scripting_name="gasket_inelastic_closure_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket inelastic closure XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket inelastic closure XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_inelastic_closure_XY" license="none" cat="result" plugin="core" cpp-name="GKDIXY"></scripting-part></div><div class="operator" id="html doc" scripting_name="html_doc"plugin="core"cat="utility"><h1 class="op-des-h1">utility: html doc</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Create dpf's html documentation. Only on Windows."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="output_path" n="0" doc="default is {working directory}/dataProcessingDoc.html" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="exposure_level" n="1" doc="Generate the documentation depending on exposure level : 0 (default) for public operators, 1 includes hidden operator, 2 includes private operator, 3 includes operator without specifications." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="html_doc" license="none" cat="utility" plugin="core" cpp-name="html_doc_old"></scripting-part></div><div class="operator" id="incremental meshes container" scripting_name="incremental::merge::meshes_container"plugin="core"cat="utility"><h1 class="op-des-h1">utility: incremental meshes container</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Incrementaly merge the input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="input" n="0" doc="" types="meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="incremented_result" n="0" doc="" types="" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="incremental::merge::meshes_container" license="none" cat="utility" plugin="core" cpp-name="incremental::merge::meshes_container"></scripting-part></div><div class="operator" id="txt file to dpf" scripting_name="txt_file_to_dpf"plugin="core"cat="utility"><h1 class="op-des-h1">utility: txt file to dpf</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Take an input string and parse it into dataProcessing type."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="input_string" n="0" doc="ex: 'double:1.0', 'int:1', 'vector<double>:1.0;1.0'" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="any_output" n="0" doc="any output" types="" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="txt_file_to_dpf" license="none" cat="utility" plugin="core" cpp-name="text_parser"></scripting-part></div><div class="operator" id="bind support (fields container)" scripting_name="bind_support_fc"plugin="core"cat="utility"><h1 class="op-des-h1">utility: bind support (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Ties a support to a fields container."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="support" n="1" doc="Meshed region or a support of the field." types="abstract_meshed_region abstract_field_support time_freq_support" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="bind_support_fc" license="none" cat="utility" plugin="core" cpp-name="BindSupportFC"></scripting-part></div><div class="operator" id="normal contact moment" scripting_name="normal_contact_moment"plugin="core"cat="result"><h1 class="op-des-h1">result: normal contact moment</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute normal contact moment by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="normal_contact_moment" license="none" cat="result" plugin="core" cpp-name="CFTNOR"></scripting-part></div><div class="operator" id="fields container get attribute" scripting_name="fc_get_attribute"plugin="core"cat="utility"><h1 class="op-des-h1">utility: fields container get attribute</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Uses the FieldsContainer APIs to return a given attribute of the mesh in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property_name" n="1" doc="Supported property names are: 'label_scoping', 'label_values', 'time_freq_support', 'labels', 'field_scoping' ." types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property_identifier" n="2" doc="Additional pin for some property : the label name for 'label_scoping' or 'label_values', the field index (default 0) for 'field_scoping'." types="string int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="property" n="0" doc="Returns a Scoping for property: 'label_scoping', a vector of int for 'label_values', a time freq support for 'time_freq_support', a vector of string for 'labels', a LabelSpace for 'field_scoping'." types="scoping vector<int32> time_freq_support vector<string> label_space" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="fc_get_attribute" license="none" cat="utility" plugin="core" cpp-name="fieldscontainer::get_attribute"></scripting-part></div><div class="operator" id="thermal strain XZ" scripting_name="thermal_strain_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_XZ" license="none" cat="result" plugin="core" cpp-name="ETHXZ"></scripting-part></div><div class="operator" id="assemble scalars to vector" scripting_name="assemble_scalars_to_vectors"plugin="core"cat="utility"><h1 class="op-des-h1">utility: assemble scalars to vector</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Takes three scalar fields and assembles them as a 3D vector field."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="x" n="0" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="y" n="1" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="z" n="2" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="assemble_scalars_to_vectors" license="none" cat="utility" plugin="core" cpp-name="assemble_scalars_to_vectors"></scripting-part></div><div class="operator" id="global eroded hourglass energy (LSDyna)" scripting_name="global_eroded_hourglass_energy"plugin="core"cat="result"><h1 class="op-des-h1">result: global eroded hourglass energy (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Global Eroded Hourglass Energy (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="global_eroded_hourglass_energy" license="none" cat="result" plugin="core" cpp-name="GLOB_ENG_ERAHO"></scripting-part></div><div class="operator" id="assemble scalars to vector fc" scripting_name="assemble_scalars_to_vectors_fc"plugin="core"cat="utility"><h1 class="op-des-h1">utility: assemble scalars to vector fc</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Takes three scalar fields container and assembles them as a 3D vector fields container."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="x" n="0" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="y" n="1" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="z" n="2" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="assemble_scalars_to_vectors_fc" license="none" cat="utility" plugin="core" cpp-name="assemble_scalars_to_vectors_fc"></scripting-part></div><div class="operator" id="assemble scalars to matrix" scripting_name="assemble_scalars_to_matrices"plugin="core"cat="utility"><h1 class="op-des-h1">utility: assemble scalars to matrix</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Take nine scalar fields and assemble them as a 3x3 matrix field. If the 'symmetrical' input is set to true, only six scalar fields are required (xx, yy, zz, xy, xz and yz)."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="xx" n="0" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="yy" n="1" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="zz" n="2" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="xy" n="3" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="yz" n="4" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="xz" n="5" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="yx" n="6" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="zy" n="7" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="zx" n="8" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="symmetrical" n="60" doc="" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="assemble_scalars_to_matrices" license="none" cat="utility" plugin="core" cpp-name="assemble_scalars_to_matrices"></scripting-part></div><div class="operator" id="make one on component" scripting_name="make_one_on_comp"plugin="core"cat="math"><h1 class="op-des-h1">math: make one on component</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Takes the input field's scoping and creates a field full of zeros, except for the indexes from pin 1 that will hold 1.0."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fieldA" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="scalar_int" n="1" doc="" types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="make_one_on_comp" license="none" cat="math" plugin="core" cpp-name="make_one_on_comp"></scripting-part></div><div class="operator" id="from scopings" scripting_name="from_scopings"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: from scopings</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Extracts multiple meshed region base on a scoping and saved in a MeshesContainer"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scopings_container" n="1" doc="if nodal scoping, then the scoping is transposed respecting the inclusive pin" types="scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="inclusive" n="2" doc="if inclusive == 1 then all the elements/faces adjacent to the nodes/faces ids in input are added, if inclusive == 0, only the elements/faces which have all their nodes/faces in the scoping are included" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="nodes_only" n="3" doc="returns mesh with nodes only (without any elements). Default is false." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="" types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="meshes" n="0" doc="" types="meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="from_scopings" license="any_dpf_supported_increments" cat="mesh" plugin="core" cpp-name="meshes::by_scopings"></scripting-part></div><div class="operator" id="assemble scalars to matrix fc" scripting_name="assemble_scalars_to_matrices_fc"plugin="core"cat="utility"><h1 class="op-des-h1">utility: assemble scalars to matrix fc</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Take nine scalar fields container and assemble them as a 3x3 matrix fields. If the 'symmetrical' input is set to true, only six field containers are required (xx, yy, zz, xy, xz and yz)."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="xx" n="0" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="yy" n="1" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="zz" n="2" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="xy" n="3" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="yz" n="4" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="xz" n="5" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="yx" n="6" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="zy" n="7" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="zx" n="8" doc="" types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="symmetrical" n="60" doc="" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="assemble_scalars_to_matrices_fc" license="none" cat="utility" plugin="core" cpp-name="assemble_scalars_to_matrices_fc"></scripting-part></div><div class="operator" id="interface contact area (LSDyna)" scripting_name="interface_contact_area"plugin="core"cat="result"><h1 class="op-des-h1">result: interface contact area (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Interface Contact Area (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="entity_scoping" n="6" doc="entity (part for matsum, interface for rcforc) where the result will be scoped" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="interface_contact_area" license="none" cat="result" plugin="core" cpp-name="R_CA"></scripting-part></div><div class="operator" id="extract from field" scripting_name="from_field"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: extract from field</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Returns the meshed region contained in the support of the mesh."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="mesh" n="0" doc="" types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="from_field" license="none" cat="mesh" plugin="core" cpp-name="GetSupportFromField"></scripting-part></div><div class="operator" id="pres to field" scripting_name="mapdl.pres_to_field"plugin="mapdl"cat="result"><h1 class="op-des-h1">result: pres to field</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read the presol generated file from mapdl."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="filepath" n="0" doc="filepath" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="columns_to_read" n="1" doc="columns_to_read" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mapdl.pres_to_field" license="none" cat="result" plugin="mapdl" cpp-name="PRES_Reader"></scripting-part></div><div class="operator" id="part internal energy (LSDyna)" scripting_name="part_internal_energy"plugin="core"cat="result"><h1 class="op-des-h1">result: part internal energy (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Part Internal Energy (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="entity_scoping" n="6" doc="entity (part for matsum, interface for rcforc) where the result will be scoped" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="part_internal_energy" license="none" cat="result" plugin="core" cpp-name="M_IE"></scripting-part></div><div class="operator" id="part momentum (LSDyna)" scripting_name="part_momentum"plugin="core"cat="result"><h1 class="op-des-h1">result: part momentum (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Part Momentum (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="entity_scoping" n="6" doc="entity (part for matsum, interface for rcforc) where the result will be scoped" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="part_momentum" license="none" cat="result" plugin="core" cpp-name="M_MV"></scripting-part></div><div class="operator" id="default value" scripting_name="default_value"plugin="core"cat="utility"><h1 class="op-des-h1">utility: default value</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Default return value from input pin 1 to output pin 0 if there is nothing on input pin 0."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="forced_value" n="0" doc="" types="" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="default_value" n="1" doc="" types="" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="output" n="0" doc="" types="" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="default_value" license="none" cat="utility" plugin="core" cpp-name="default_value"></scripting-part></div><div class="operator" id="elemental nodal to nodal elemental (fields container)" scripting_name="elemental_nodal_to_nodal_elemental_fc"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: elemental nodal to nodal elemental (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Transforms Elemental Nodal fields to Nodal Elemental fields. The result is computed on a given node's scoping."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elemental_nodal_to_nodal_elemental_fc" license="none" cat="averaging" plugin="core" cpp-name="ElementalNodal_To_NodalElemental_fc"></scripting-part></div><div class="operator" id="rms velocity" scripting_name="rms_velocity"plugin="core"cat="result"><h1 class="op-des-h1">result: rms velocity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read RMS Velocity by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="rms_velocity" license="none" cat="result" plugin="core" cpp-name="V_RMS"></scripting-part></div><div class="operator" id="acceleration X" scripting_name="acceleration_X"plugin="core"cat="result"><h1 class="op-des-h1">result: acceleration X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal accelerations X component of the vector (1st component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="acceleration_X" license="none" cat="result" plugin="core" cpp-name="AX"></scripting-part></div><div class="operator" id="poynting vector" scripting_name="poynting_vector"plugin="core"cat="result"><h1 class="op-des-h1">result: poynting vector</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Compute the Poynting Vector"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_containerA" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_containerB" n="1" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_containerC" n="2" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_containerD" n="3" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="abstract_meshed_region" n="4" doc="the mesh region in this pin have to be boundary or skin mesh" types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="int32" n="5" doc="load step number, if it's specified, the Poynting Vector is computed only on the substeps of this step" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="poynting_vector" license="any_dpf_supported_increments" cat="result" plugin="core" cpp-name="PoyntingVector"></scripting-part></div><div class="operator" id="extract sub fields container" scripting_name="extract_sub_fc"plugin="core"cat="utility"><h1 class="op-des-h1">utility: extract sub fields container</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Creates a new fields container with all the fields corresponding to the label space in input 1. If pin 1 is not defined, pin 0 input will be copied to the output."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="fields_container" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="label_space" n="1" doc="Label space, or scoping defining the label space (scoping location), values to keep (scoping IDs)" types="label_space scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="collapse_labels" n="2" doc="If set to true (default) the input label space (scoping location) is suppressed from the output fields container, otherwise, label space is kept." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="fields_container" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="extract_sub_fc" license="none" cat="utility" plugin="core" cpp-name="extract_sub_fc"></scripting-part></div><div class="operator" id="total strain (LSDyna)" scripting_name="total_strain"plugin="core"cat="result"><h1 class="op-des-h1">result: total strain (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Total strain (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="total_strain" license="none" cat="result" plugin="core" cpp-name="EL"></scripting-part></div><div class="operator" id="extract sub meshes container" scripting_name="extract_sub_mc"plugin="core"cat="utility"><h1 class="op-des-h1">utility: extract sub meshes container</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Creates a new meshes container with all the meshed regions corresponding to the label space in input 1. If pin 1 is not defined, pin 0 input will be copied to the output."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="meshes" n="0" doc="meshes" types="meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="label_space" n="1" doc="Label space, or scoping defining the label space (scoping location), values to keep (scoping IDs)" types="label_space scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="collapse_labels" n="2" doc="If set to true (default) the input label space (scoping location) is suppressed from the output meshes container, otherwise, label space is kept." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="meshes_container" n="0" doc="meshes" types="meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="extract_sub_mc" license="none" cat="utility" plugin="core" cpp-name="extract_sub_mc"></scripting-part></div><div class="operator" id="extract sub scopings container" scripting_name="extract_sub_sc"plugin="core"cat="utility"><h1 class="op-des-h1">utility: extract sub scopings container</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Creates a new scopings container with all the scopings corresponding to the label space in input 1. If pin 1 is not defined, pin 0 input will be copied to the output."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scopings_container" n="0" doc="scopings_container" types="scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="label_space" n="1" doc="Label space, or scoping defining the label space (scoping location), values to keep (scoping IDs)" types="label_space scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="collapse_labels" n="2" doc="If set to true (default) the input label space (scoping location) is suppressed from the output scopings container, otherwise, label space is kept." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="scopings_container" n="0" doc="scopings_container" types="scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="extract_sub_sc" license="none" cat="utility" plugin="core" cpp-name="extract_sub_sc"></scripting-part></div><div class="operator" id="elemental difference (fields container)" scripting_name="elemental_difference_fc"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: elemental difference (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Transforms an Elemental Nodal or Nodal field into an Elemental field. Each elemental value is the maximum difference between the unaveraged or averaged (depending on the input fields) computed result for all nodes in this element. The result is computed on a given element scoping. If the input fields are mixed shell/solid, and the shell's layers are not specified as collapsed, then the fields are split by element shape and the output fields container has an elshape label."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="1" doc="The mesh region in this pin is used to perform the averaging, used if there is no fields support." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="scoping" n="3" doc="Average only on these elements. If it is scoping container, the label must correspond to the one of the fields container." types="scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="collapse_shell_layers" n="10" doc="If true, the data across different shell layers is averaged as well (default is false)." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elemental_difference_fc" license="any_dpf_supported_increments" cat="averaging" plugin="core" cpp-name="elemental_difference_fc"></scripting-part></div><div class="operator" id="compute time scoping" scripting_name="compute_time_scoping"plugin="core"cat="utility"><h1 class="op-des-h1">utility: compute time scoping</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the time frequency scoping (made of set IDs) necessary to interpolate on a list of time or frequencies."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_freq_values" n="0" doc="List of frequencies or times needed. To specify load steps, put a field (and not a list) in input with a scoping located on 'TimeFreq_steps'." types="double vector<double> field time_freq_support" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="step" n="2" doc="" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="interpolation_type" n="4" doc="1:ramped' or 2:stepped', default is ramped" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="time_freq_support" n="8" doc="" types="time_freq_support" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="scoping" n="0" doc="time_scoping" types="scoping" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field" n="1" doc="time_freq_values" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="compute_time_scoping" license="none" cat="utility" plugin="core" cpp-name="compute_time_scoping"></scripting-part></div><div class="operator" id="static pressure" scripting_name="static_pressure"plugin="core"cat="result"><h1 class="op-des-h1">result: static pressure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Static Pressure by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="static_pressure" license="none" cat="result" plugin="core" cpp-name="P_S"></scripting-part></div><div class="operator" id="elastic strain" scripting_name="elastic_strain"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain" license="none" cat="result" plugin="core" cpp-name="EPEL"></scripting-part></div><div class="operator" id="window bartlett (fields container)" scripting_name="window_bartlett_fc"plugin="core"cat="math"><h1 class="op-des-h1">math: window bartlett (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Apply bartlett windowing on a given FieldsContainer having time label or a Field located on time. Assume that time sampling is evenly spaced (use time_freq_interpolation before otherwise)."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="window_bartlett_fc" license="none" cat="math" plugin="core" cpp-name="window::bartlett_fc"></scripting-part></div><div class="operator" id="turbulent viscosity" scripting_name="turbulent_viscosity"plugin="core"cat="result"><h1 class="op-des-h1">result: turbulent viscosity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Turbulent Viscosity by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="turbulent_viscosity" license="none" cat="result" plugin="core" cpp-name="MUT"></scripting-part></div><div class="operator" id="python generator" scripting_name="python_generator"plugin="core"cat="utility"><h1 class="op-des-h1">utility: python generator</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Generates .py file with specifications for loaded plugin(s)."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="dll_source_path" n="0" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="output_path" n="1" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="load_symbol" n="2" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="library_key" n="3" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="python_generator" license="none" cat="utility" plugin="core" cpp-name="python_generator"></scripting-part></div><div class="operator" id="make overall" scripting_name="make_overall"plugin="core"cat="utility"><h1 class="op-des-h1">utility: make overall</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Extracts a value from a field and makes a new field containing only this value, with the associated scoping's location set as 'overall'."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="id" n="1" doc="" types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="make_overall" license="none" cat="utility" plugin="core" cpp-name="make_overall"></scripting-part></div><div class="operator" id="elements volume" scripting_name="elements_volume"plugin="core"cat="geo"><h1 class="op-des-h1">geo: elements volume</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Compute the measure of the Elements (volume for 3D elements, surface for 2D elements or length for 1D elements) using default shape functions, except for polyhedrons."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh" n="0" doc="" types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="If not provided, the measure of all elements for the mesh is computed. If provided, the Scoping needs to have 'Elemental' location." types="scoping" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elements_volume" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="element::volume"></scripting-part></div><div class="operator" id="pressure" scripting_name="pressure"plugin="core"cat="result"><h1 class="op-des-h1">result: pressure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Pressure by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="pressure" license="none" cat="result" plugin="core" cpp-name="Pressure"></scripting-part></div><div class="operator" id="stress" scripting_name="stress"plugin="core"cat="result"><h1 class="op-des-h1">result: stress</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress" license="none" cat="result" plugin="core" cpp-name="S"></scripting-part></div><div class="operator" id="stress X" scripting_name="stress_X"plugin="core"cat="result"><h1 class="op-des-h1">result: stress X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_X" license="none" cat="result" plugin="core" cpp-name="SX"></scripting-part></div><div class="operator" id="gasket thermal closure XZ" scripting_name="gasket_thermal_closure_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket thermal closure XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket thermal closure XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_thermal_closure_XZ" license="none" cat="result" plugin="core" cpp-name="GKTHXZ"></scripting-part></div><div class="operator" id="stress Y" scripting_name="stress_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: stress Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses YY normal component (11 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_Y" license="none" cat="result" plugin="core" cpp-name="SY"></scripting-part></div><div class="operator" id="stress Z" scripting_name="stress_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: stress Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses ZZ normal component (22 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_Z" license="none" cat="result" plugin="core" cpp-name="SZ"></scripting-part></div><div class="operator" id="gasket thermal closure XY" scripting_name="gasket_thermal_closure_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket thermal closure XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket thermal closure XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_thermal_closure_XY" license="none" cat="result" plugin="core" cpp-name="GKTHXY"></scripting-part></div><div class="operator" id="stress XY" scripting_name="stress_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: stress XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_XY" license="none" cat="result" plugin="core" cpp-name="SXY"></scripting-part></div><div class="operator" id="stress YZ" scripting_name="stress_YZ"plugin="core"cat="result"><h1 class="op-des-h1">result: stress YZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses YZ shear component (12 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_YZ" license="none" cat="result" plugin="core" cpp-name="SYZ"></scripting-part></div><div class="operator" id="modal basis" scripting_name="modal_basis"plugin="core"cat="result"><h1 class="op-des-h1">result: modal basis</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute modal basis by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="modal_basis" license="none" cat="result" plugin="core" cpp-name="ModalBasis"></scripting-part></div><div class="operator" id="stress XZ" scripting_name="stress_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: stress XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_XZ" license="none" cat="result" plugin="core" cpp-name="SXZ"></scripting-part></div><div class="operator" id="merge string fields" scripting_name="merge_string_fields"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge string fields</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of string fields into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="string_fields" n="0" doc="Either a a vector of string fields to merge or string fields from pin 0 to ..." types="vector<shared_ptr<string_field>> string_field" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="string_field" n="0" doc="" types="string_field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_string_fields" license="none" cat="utility" plugin="core" cpp-name="merge::string_field"></scripting-part></div><div class="operator" id="stress principal 1" scripting_name="stress_principal_1"plugin="core"cat="result"><h1 class="op-des-h1">result: stress principal 1</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses 1st principal component by calling the readers defined by the datasources and computing its eigen values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_principal_1" license="none" cat="result" plugin="core" cpp-name="S1"></scripting-part></div><div class="operator" id="stress principal 2" scripting_name="stress_principal_2"plugin="core"cat="result"><h1 class="op-des-h1">result: stress principal 2</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses 2nd principal component by calling the readers defined by the datasources and computing its eigen values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_principal_2" license="none" cat="result" plugin="core" cpp-name="S2"></scripting-part></div><div class="operator" id="stress principal 3" scripting_name="stress_principal_3"plugin="core"cat="result"><h1 class="op-des-h1">result: stress principal 3</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component stresses 3rd principal component by calling the readers defined by the datasources and computing its eigen values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_principal_3" license="none" cat="result" plugin="core" cpp-name="S3"></scripting-part></div><div class="operator" id="convertnum bcs to nod" scripting_name="convertnum_bcs_to_nod"plugin="mapdl"cat="invariant"><h1 class="op-des-h1">invariant: convertnum bcs to nod</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Converts a fields container from BCS to NOD ordering."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="2" doc="fields_container" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Data_sources (must contain the full file)." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="convertnum_bcs_to_nod" license="none" cat="invariant" plugin="mapdl" cpp-name="convertnum_bcs_to_nod"></scripting-part></div><div class="operator" id="tangential contact moment" scripting_name="tangential_contact_moment"plugin="core"cat="result"><h1 class="op-des-h1">result: tangential contact moment</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute tangential contact moment by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="tangential_contact_moment" license="none" cat="result" plugin="core" cpp-name="CFTTAN"></scripting-part></div><div class="operator" id="stress von mises" scripting_name="stress_von_mises"plugin="core"cat="result"><h1 class="op-des-h1">result: stress von mises</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component stresses, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="stress_von_mises" license="none" cat="result" plugin="core" cpp-name="S_eqv"></scripting-part></div><div class="operator" id="gasket stress" scripting_name="gasket_stress"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket stress</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket stress by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_stress" license="none" cat="result" plugin="core" cpp-name="GKS"></scripting-part></div><div class="operator" id="contact fluid penetration pressure" scripting_name="contact_fluid_penetration_pressure"plugin="core"cat="result"><h1 class="op-des-h1">result: contact fluid penetration pressure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element actual applied fluid penetration pressure by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="contact_fluid_penetration_pressure" license="none" cat="result" plugin="core" cpp-name="ECT_FRES"></scripting-part></div><div class="operator" id="gasket stress X" scripting_name="gasket_stress_X"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket stress X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket stress XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_stress_X" license="none" cat="result" plugin="core" cpp-name="GKSX"></scripting-part></div><div class="operator" id="gasket stress XY" scripting_name="gasket_stress_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket stress XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket stress XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_stress_XY" license="none" cat="result" plugin="core" cpp-name="GKSXY"></scripting-part></div><div class="operator" id="gasket deformation" scripting_name="gasket_deformation"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket deformation</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket deformation by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_deformation" license="none" cat="result" plugin="core" cpp-name="GKD"></scripting-part></div><div class="operator" id="gasket deformation X" scripting_name="gasket_deformation_X"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket deformation X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket deformation XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_deformation_X" license="none" cat="result" plugin="core" cpp-name="GKDX"></scripting-part></div><div class="operator" id="elements facets surfaces over time" scripting_name="elements_facets_surfaces_over_time"plugin="core"cat="geo"><h1 class="op-des-h1">geo: elements facets surfaces over time</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Calculates for a mesh, the surface of each element's facet over time for each specified time step. The output is a new mesh made with only surface elements."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scoping" n="1" doc="" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="displacement" n="2" doc="Displacement field's container." types="fields_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="Mesh must be defined if the displacement field's container does not contain it, or if there is no displacement." types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="Surfaces field." types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="1" doc="Mesh made of surface elements only." types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elements_facets_surfaces_over_time" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="surfaces_provider"></scripting-part></div><div class="operator" id="gasket deformation XY" scripting_name="gasket_deformation_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket deformation XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket deformation XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_deformation_XY" license="none" cat="result" plugin="core" cpp-name="GKDXY"></scripting-part></div><div class="operator" id="property field provider by property name" scripting_name="property_field_provider_by_name"plugin="core"cat="metadata"><h1 class="op-des-h1">metadata: property field provider by property name</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Provides the property values for a set of elements for a defined property name."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh_scoping" n="1" doc="scoping that defines the set of elements to fetch the property values for. If not specified, applied on all the elements of the mesh." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="optional if using a dataSources" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="optional if using a streamsContainer" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property_name" n="13" doc="property to read, that can be the following: elements_connectivity, nodes_connectivity, material, element_type, apdl_section_id, apdl_real_id, apdl_esys_id, mapdl_element_type, mapdl_element_type_id, harmonic_index, step, substep, keyopt_i (i = 1 -> 18)." types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="property_field" n="0" doc="property field" types="property_field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="property_field_provider_by_name" license="none" cat="metadata" plugin="core" cpp-name="property_field_provider_by_name"></scripting-part></div><div class="operator" id="gasket deformation XZ" scripting_name="gasket_deformation_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket deformation XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket deformation XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_deformation_XZ" license="none" cat="result" plugin="core" cpp-name="GKDXZ"></scripting-part></div><div class="operator" id="mesh provider" scripting_name="mesh_provider"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: mesh provider</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads a mesh from result files."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="Optional time/frequency set ID of the mesh, supported for adaptative meshes." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="If 1, cyclic symmetry is ignored. If 2, cyclic expansion is done (default is 1)." types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids with one entity (vector) or region scoping with one id (scoping) (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="laziness" n="200" doc="configurate whether lazy evaluation can be performed and to what extent. Supported attributes are: 
 - 'num_named_selections'->num named selection to read (-1 is all, int32, default si -1), careful: the other named selections will not be available, use mesh_property_provider Operator to read them.
 - all mesh property fields 'mat', 'named_selection', 'apdl_element_type', 'section'-> if set to 1 these properties will not be read and a workflow will be bounded to the properties to be evaluated on demand, with 0 they are read (default is 0).
-- 'all_available_properties' option set to 0 will return all possible properties" types="abstract_data_tree" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="mesh" n="0" doc="" types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="permissive" default="false" doc="If this option is set to true, warning checks (like unit or data sizes) won't be done." types="bool" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mesh_provider" license="none" cat="mesh" plugin="core" cpp-name="mesh_provider"></scripting-part></div><div class="operator" id="gasket inelastic closure" scripting_name="gasket_inelastic_closure"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket inelastic closure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket inelastic closure by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_inelastic_closure" license="none" cat="result" plugin="core" cpp-name="GKDI"></scripting-part></div><div class="operator" id="export symbolic workflow" scripting_name="export_symbolic_workflow"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: export symbolic workflow</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Transforms a Workflow into a symbolic Workflow and writes it to a file (if a path is set in input) or string"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="workflow" n="0" doc="" types="workflow" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="path" n="1" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="format" n="2" doc="0 is ASCII format and 1 is binary, default is 0." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="options" n="3" doc="1 copies connections with its data, 2 forwards named inputs and outputs names, 7 copies connections of named inputs and ouputs with their data. default is 7." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="data_sources" n="0" doc="" types="data_sources string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="export_symbolic_workflow" license="any_dpf_supported_increments" cat="serialization" plugin="core" cpp-name="export_symbolic_workflow"></scripting-part></div><div class="operator" id="write cms rbd file" scripting_name="write_cms_rbd_file"plugin="core"cat="result"><h1 class="op-des-h1">result: write cms rbd file</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Write the invariant terms and the model data in a cms_rbd file"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="model_data" n="0" doc="data describing the finite element model" types="property_field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="center_of_mass" n="1" doc="center of mass of the body" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="inertia_relief" n="2" doc="inertia matrix" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="model_size" n="3" doc="size of the diagonal box containing the body" types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="master_node_coordinates" n="4" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="v_trsf" n="5" doc="translational and rotational shape functions" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="k_mat" n="6" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mass_mat" n="7" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="c_mat" n="8" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="rhs" n="9" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dn" n="10" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dr_cross_n" n="11" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="drn" n="12" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dn_cross_n" n="13" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnx_y" n="14" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dny_y" n="15" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnz_y" n="16" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dyx_n" n="17" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dyy_n" n="18" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dyz_n" n="19" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnxn" n="20" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnyn" n="21" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnzn" n="22" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="file_path" n="23" doc="path with cms_rbd extension where the export occurs" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="data_sources" n="0" doc="Data Source containing the cms_rbd file generated." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="write_cms_rbd_file" license="none" cat="result" plugin="core" cpp-name="write_cms_rbd_file"></scripting-part></div><div class="operator" id="gasket inelastic closure X" scripting_name="gasket_inelastic_closure_X"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket inelastic closure X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket inelastic closure XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_inelastic_closure_X" license="none" cat="result" plugin="core" cpp-name="GKDIX"></scripting-part></div><div class="operator" id="beam properties" scripting_name="beam_properties"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: beam properties</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads the beam's properties from the result files contained in the streams or data sources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams" n="3" doc="Result file container allowed to be kept open to cache data." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Result file path container, used if no streams are set." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="mesh_out" n="0" doc="This mesh updates a new map containing a field of the beam's properties if there is at least one beam in mesh." types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_type_section_id" n="1" doc="This field contains the section ID of beams. 1:REC; 3:CSOLID, 4:CTUBE, 5:CHAN, 6:Z, 7:L, 8:I, 9:T, 11:HATS, 12:HREC." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_area" n="2" doc="This field contains the area of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_moment_inertia" n="3" doc="This field contains the inertia moment of beams. Iyy, Iyz, Izz." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_geometry" n="4" doc="This field contains the geometry of beams. REC:b,h. CSOLID:Ri. CTUBE:Ri, Re. CHAN:w1,w2,w3,t1,t2,t3. Z:w1,w2,w3,t1,t2,t3. L:w1,w2,t1,t2. I:w1,w2,w3,t1,t2,t3. T:w1,w2,t1,t2. HATS: w1,w2,w3,w4,t1,t2,t3,t4. HREC:w1,w2,t1,t2,t3,t4." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_young_modulus" n="5" doc="This field contains the Young's modulus of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_poisson_ratio" n="6" doc="This field contains the Poisson's ratio of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_shear_modulus" n="7" doc="This field contains the Shear Modulus of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_beam_length" n="8" doc="This field contains the length of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_torsion_constant" n="9" doc="This field contains the Torsion Constant of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_warping_constant" n="10" doc="This field contains the Warping Constant of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_offset_type" n="11" doc="This field contains offset type of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_offset_y" n="12" doc="This field contains offset y of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_offset_z" n="13" doc="This field contains offset z of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="beam_properties" license="none" cat="mesh" plugin="core" cpp-name="beam_properties"></scripting-part></div><div class="operator" id="gasket inelastic closure XZ" scripting_name="gasket_inelastic_closure_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket inelastic closure XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket inelastic closure XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_inelastic_closure_XZ" license="none" cat="result" plugin="core" cpp-name="GKDIXZ"></scripting-part></div><div class="operator" id="gasket thermal closure" scripting_name="gasket_thermal_closure"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket thermal closure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket thermal closure by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_thermal_closure" license="none" cat="result" plugin="core" cpp-name="GKTH"></scripting-part></div><div class="operator" id="gasket thermal closure X" scripting_name="gasket_thermal_closure_X"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket thermal closure X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket thermal closure XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_thermal_closure_X" license="none" cat="result" plugin="core" cpp-name="GKTHX"></scripting-part></div><div class="operator" id="elastic strain X" scripting_name="elastic_strain_X"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_X" license="none" cat="result" plugin="core" cpp-name="EPELX"></scripting-part></div><div class="operator" id="elastic strain Y" scripting_name="elastic_strain_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains YY normal component (11 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_Y" license="none" cat="result" plugin="core" cpp-name="EPELY"></scripting-part></div><div class="operator" id="elastic strain Z" scripting_name="elastic_strain_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains ZZ normal component (22 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_Z" license="none" cat="result" plugin="core" cpp-name="EPELZ"></scripting-part></div><div class="operator" id="merge weighted fields containers" scripting_name="merge_weighted_fields_containers"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge weighted fields containers</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of fields containers into a unique one, applying a weight on the sum of the fields."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="sum_merge" n="-3" doc="Default is false. If true, redundant quantities are summed instead of being ignored." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merged_fields_support" n="-2" doc="Already merged field support." types="abstract_field_support" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merged_fields_containers_support" n="-1" doc="Already merged fields containers support." types="abstract_field_support umap<string,shared_ptr<abstract_field_support>>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_containers" n="0" doc="A vector of fields containers to merge or fields containers from pin 0 to ..." types="vector<shared_ptr<fields_container>> fields_container" optional="false"ellipsis="true"inplace="false"></pin-def><pin-def name="weights" n="1000" doc="Weights to apply to each field from pin 1000 to ..." types="vector<shared_ptr<class dataProcessing::DpfTypeCollection<class dataProcessing::CPropertyField>>> class dataProcessing::DpfTypeCollection<class dataProcessing::CPropertyField>" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="read_inputs_in_parallel" default="false" doc="If this option is set to true, the operator's inputs will be evaluated in parallel." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_weighted_fields_containers" license="none" cat="utility" plugin="core" cpp-name="merge::weighted_fields_container"></scripting-part></div><div class="operator" id="min/max over time" scripting_name="mechanical::min_max_over_time"plugin="core"cat="math"><h1 class="op-des-h1">math: min/max over time</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Evaluates minimum/maximum over time/frequency."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="int32" n="5" doc="Define min or max." types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mechanical::min_max_over_time" license="none" cat="math" plugin="core" cpp-name="mechanical::min_max_over_time"></scripting-part></div><div class="operator" id="global energy ratio without eroded energy (LSDyna)" scripting_name="global_energy_ratio_wo_eroded"plugin="core"cat="result"><h1 class="op-des-h1">result: global energy ratio without eroded energy (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Global Energy ratio without Eroded Energy (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="global_energy_ratio_wo_eroded" license="none" cat="result" plugin="core" cpp-name="GLOB_ENG_ER"></scripting-part></div><div class="operator" id="merge fields containers" scripting_name="merge_fields_containers"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge fields containers</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of fields containers into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="should_merge_named_selections" n="-200" doc="For some result files (such as RST), the scoping on names selection is duplicated through all the distributed files.If this pin is false, the merging process is skipped. If it is true, this scoping is merged. Default is true." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sum_merge" n="-3" doc="Default is false. If true, redundant quantities are summed instead of being ignored." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merged_fields_support" n="-2" doc="Already merged field support." types="abstract_field_support" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merged_fields_containers_support" n="-1" doc="Already merged fields containers support." types="abstract_field_support umap<string,shared_ptr<abstract_field_support>>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_containers" n="0" doc="A vector of fields containers to merge or fields containers from pin 0 to ..." types="vector<shared_ptr<fields_container>> fields_container" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="read_inputs_in_parallel" default="false" doc="If this option is set to true, the operator's inputs will be evaluated in parallel." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_fields_containers" license="none" cat="utility" plugin="core" cpp-name="merge::fields_container"></scripting-part></div><div class="operator" id="elastic strain XY" scripting_name="elastic_strain_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_XY" license="none" cat="result" plugin="core" cpp-name="EPELXY"></scripting-part></div><div class="operator" id="elastic strain YZ" scripting_name="elastic_strain_YZ"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain YZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains YZ shear component (12 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_YZ" license="none" cat="result" plugin="core" cpp-name="EPELYZ"></scripting-part></div><div class="operator" id="interface contact mass (LSDyna)" scripting_name="interface_contact_mass"plugin="core"cat="result"><h1 class="op-des-h1">result: interface contact mass (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Interface Contact Mass (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="entity_scoping" n="6" doc="entity (part for matsum, interface for rcforc) where the result will be scoped" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="interface_contact_mass" license="none" cat="result" plugin="core" cpp-name="R_CMass"></scripting-part></div><div class="operator" id="eigen values (fields container)" scripting_name="eigen_values_fc"plugin="core"cat="invariant"><h1 class="op-des-h1">invariant: eigen values (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the element-wise Eigen values of all the tensor fields of a fields container."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="eigen_values_fc" license="none" cat="invariant" plugin="core" cpp-name="eig_values_fc"></scripting-part></div><div class="operator" id="elastic strain XZ" scripting_name="elastic_strain_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_XZ" license="none" cat="result" plugin="core" cpp-name="EPELXZ"></scripting-part></div><div class="operator" id="mesh property provider" scripting_name="mesh_property_provider"plugin="core"cat="metadata"><h1 class="op-des-h1">metadata: mesh property provider</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads a property related to the mesh, defined by its name, by calling the readers defined by the data sources. These properties can be used to fill in the mesh."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh_scoping" n="1" doc="Retrieves a property field on a subset of elements or nodes." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="streams (result file container) (optional)" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="If the stream is null, retrieves the file path from the data sources." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property_name" n="13" doc="Supported property names are: 'mat', 'named_selection', 'named_selection_names', 'apdl_element_type', 'section', 'elprops', 'keyopt_1' to 'keyopt_18'." types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property_identifier" n="17" doc="Retrieves a property at a given index or by name. For example, a named selection's number or a named selection's name." types="int32 string" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="property" n="0" doc="Returns a property field for properties: 'mat', 'apdl_element_type', 'section', 'elprops', 'keyopt_1' to 'keyopt_18' (or any mesh's property field), a scoping for properties:'named_selection', a string field for properties: 'named_selection_names'." types="scoping property_field string_field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mesh_property_provider" license="none" cat="metadata" plugin="core" cpp-name="mesh_property_provider"></scripting-part></div><div class="operator" id="rigid transformation" scripting_name="rigid_transformation"plugin="core"cat="result"><h1 class="op-des-h1">result: rigid transformation</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Extracts rigid body motions from a displacement in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="streams (result file container) (optional)" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="If the stream is null, retrieves the file path from the data sources." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="rigid_transformation" license="none" cat="result" plugin="core" cpp-name="rigid_transformation_provider"></scripting-part></div><div class="operator" id="elastic strain principal 1" scripting_name="elastic_strain_principal_1"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain principal 1</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains 1st principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_principal_1" license="none" cat="result" plugin="core" cpp-name="EPEL1"></scripting-part></div><div class="operator" id="elastic strain principal 2" scripting_name="elastic_strain_principal_2"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain principal 2</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains 2nd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_principal_2" license="none" cat="result" plugin="core" cpp-name="EPEL2"></scripting-part></div><div class="operator" id="scoping normals" scripting_name="normals"plugin="core"cat="geo"><h1 class="op-des-h1">geo: scoping normals</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="compute the normals at the given nodes or element scoping based on the given mesh (first version, the element normal is only handled on the shell elements)"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh" n="0" doc="" types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="field" n="3" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="normals" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="normals_provider"></scripting-part></div><div class="operator" id="merge scopings" scripting_name="merge_scopings"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge scopings</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of scopings into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scopings" n="0" doc="Either a scopings container, a vector of scopings to merge, or scopings from pin 0 to ..." types="scoping scopings_container vector<shared_ptr<scoping>>" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_scoping" n="0" doc="" types="scoping" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_scopings" license="none" cat="utility" plugin="core" cpp-name="merge::scoping"></scripting-part></div><div class="operator" id="elastic strain principal 3" scripting_name="elastic_strain_principal_3"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain principal 3</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains 3rd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_principal_3" license="none" cat="result" plugin="core" cpp-name="EPEL3"></scripting-part></div><div class="operator" id="cyclic analytic disp max" scripting_name="cyclic_analytic_usum_max"plugin="core"cat="result"><h1 class="op-des-h1">result: cyclic analytic disp max</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Compute the maximum of the total deformation that can be expected on 360 degrees"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="" types="scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="" types="scopings_container scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="field container with the base and duplicate sectors" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="default is true" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="cyclic_support" n="16" doc="" types="cyclic_support" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="FieldsContainer filled in" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><config-spec name="use_cache" default="true" doc="Some intermediate data is put in cache if this config is set to true. This option can reduce computation time after the first run." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="cyclic_analytic_usum_max" license="none" cat="result" plugin="core" cpp-name="cyclic_analytic_usum_max"></scripting-part></div><div class="operator" id="elastic strain eqv" scripting_name="elastic_strain_eqv"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain eqv</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal equivalent elastic strain by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_eqv" license="none" cat="result" plugin="core" cpp-name="EPEL_EQV"></scripting-part></div><div class="operator" id="electric flux density X" scripting_name="electric_flux_density_X"plugin="core"cat="result"><h1 class="op-des-h1">result: electric flux density X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Electric flux density X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_flux_density_X" license="none" cat="result" plugin="core" cpp-name="EFDX"></scripting-part></div><div class="operator" id="elastic strain intensity" scripting_name="elastic_strain_intensity"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain intensity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component elastic strains, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_intensity" license="none" cat="result" plugin="core" cpp-name="EPEL_intensity"></scripting-part></div><div class="operator" id="elastic strain max_shear" scripting_name="elastic_strain_max_shear"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain max_shear</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component elastic strains, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_max_shear" license="none" cat="result" plugin="core" cpp-name="EPEL_max_shear"></scripting-part></div><div class="operator" id="turbulent dissipation rate (omega)" scripting_name="omega"plugin="core"cat="result"><h1 class="op-des-h1">result: turbulent dissipation rate (omega)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Turbulent Specific Dissipation Rate (omega) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="omega" license="none" cat="result" plugin="core" cpp-name="OME"></scripting-part></div><div class="operator" id="to elemental (fields container)" scripting_name="to_elemental_fc"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: to elemental (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Transforms Input fields into Elemental fields using an averaging process. The result is computed on a given element's scoping."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="1" doc="" types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="3" doc="" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="smoothen_values" n="7" doc="if it is set to true, Elemental Nodal fields are first averaged on nodes and then averaged on elements (default is false)." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="collapse_shell_layers" n="10" doc="If true, the data across different shell layers is averaged as well (default is false)." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merge_solid_shell" n="26" doc="For shell/solid mixed fields, group in the same field all solids and shells (false by default). If this pin is true and collapse_shell_layers is false, a shell_layer needs to be specified." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="0: Top, 1: Bottom, 2: BottomTop, 3: Mid, 4: BottomTopMid. If merge_solid_shell is true, this pin needs to be specified to a value that extracts only one layer (Top, Bottom or Mid)." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="to_elemental_fc" license="none" cat="averaging" plugin="core" cpp-name="to_elemental_fc"></scripting-part></div><div class="operator" id="plastic strain" scripting_name="plastic_strain"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain" license="none" cat="result" plugin="core" cpp-name="EPPL"></scripting-part></div><div class="operator" id="transpose" scripting_name="transpose"plugin="core"cat="scoping"><h1 class="op-des-h1">scoping: transpose</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Transposes the input scoping or scopings container (Elemental/Faces --> Nodal, or Nodal ---> Elemental/Faces), based on the input mesh region."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh_scoping" n="0" doc="Scoping or scopings container (the input type is the output type)" types="scoping scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="meshed_region" n="1" doc="" types="meshed_region meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="inclusive" n="2" doc="if inclusive == 1 then all the elements/faces adjacent to the nodes/faces ids in input are added, if inclusive == 0, only the elements/faces which have all their nodes/faces in the scoping are included" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="Output scoping location for meshes with nodes, faces and elements. By default, elemental and faces scopings transpose to nodal, and nodal scopings transpose to elemental." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="mesh_scoping" n="0" doc="Scoping or scopings container (the input type is the output type)" types="scoping scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="transpose" license="none" cat="scoping" plugin="core" cpp-name="transpose_scoping"></scripting-part></div><div class="operator" id="mass fraction" scripting_name="mass_fraction"plugin="core"cat="result"><h1 class="op-des-h1">result: mass fraction</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Mass Fraction by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mass_fraction" license="none" cat="result" plugin="core" cpp-name="Y"></scripting-part></div><div class="operator" id="plastic strain X" scripting_name="plastic_strain_X"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_X" license="none" cat="result" plugin="core" cpp-name="EPPLX"></scripting-part></div><div class="operator" id="coordinates (LSDyna)" scripting_name="coordinates"plugin="core"cat="result"><h1 class="op-des-h1">result: coordinates (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Coordinates (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="coordinates" license="none" cat="result" plugin="core" cpp-name="X"></scripting-part></div><div class="operator" id="plastic strain Y" scripting_name="plastic_strain_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains YY normal component (11 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_Y" license="none" cat="result" plugin="core" cpp-name="EPPLY"></scripting-part></div><div class="operator" id="band pass (fields container)" scripting_name="field_band_pass_fc"plugin="core"cat="filter"><h1 class="op-des-h1">filter: band pass (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="The band pass filter returns all the values above (but not equal to) the minimum threshold value and below (but not equal to) the maximum threshold value in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="field or fields container with only one field is expected" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="min_threshold" n="1" doc="A minimum threshold scalar or a field containing one value is expected." types="double field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="max_threshold" n="2" doc="A maximum threshold scalar or a field containing one value is expected." types="double field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="field_band_pass_fc" license="any_dpf_supported_increments" cat="filter" plugin="core" cpp-name="core::field::band_pass_fc"></scripting-part></div><div class="operator" id="to polar coordinates" scripting_name="to_polar_coordinates"plugin="core"cat="geo"><h1 class="op-des-h1">geo: to polar coordinates</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Finds r, theta (rad), and z coordinates of a coordinates (nodal) field in a cartesian coordinates system where the input coordinate system defines the rotation axis and the origin."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="field or fields container with only one field is expected" types="field fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="coordinate_system" n="1" doc="3-3 rotation matrix and origin coordinates must be set here to define a coordinate system. By default, the rotation axis is the z axis and the origin is [0,0,0]." types="field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="to_polar_coordinates" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="polar_coordinates"></scripting-part></div><div class="operator" id="fft evaluation" scripting_name="fft_eval"plugin="core"cat="math"><h1 class="op-des-h1">math: fft evaluation</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Evaluate the fast fourier transforms at a given set of fields."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field_t" n="0" doc="field of values to evaluate" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="time_scoping" n="1" doc="if specified only the results at these set ids are used" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="offset" n="2" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="fft_eval" license="any_dpf_supported_increments" cat="math" plugin="core" cpp-name="fft_eval"></scripting-part></div><div class="operator" id="global total energy (LSDyna)" scripting_name="global_total_energy"plugin="core"cat="result"><h1 class="op-des-h1">result: global total energy (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Global Total Energy (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="global_total_energy" license="none" cat="result" plugin="core" cpp-name="GLOB_ENG_TE"></scripting-part></div><div class="operator" id="plastic strain Z" scripting_name="plastic_strain_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains ZZ normal component (22 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_Z" license="none" cat="result" plugin="core" cpp-name="EPPLZ"></scripting-part></div><div class="operator" id="merge materials" scripting_name="merge_materials"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge materials</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of materials into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="materials" n="0" doc="A vector of materials to merge or materials from pin 0 to ..." types="vector<shared_ptr<materials>> materials" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_materials" n="0" doc="" types="materials" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_materials" license="none" cat="utility" plugin="core" cpp-name="merge::materials"></scripting-part></div><div class="operator" id="vtk export" scripting_name="vtk_export"plugin="vtk"cat="serialization"><h1 class="op-des-h1">serialization: vtk export</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Write the input field and fields container into a given vtk path"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="export_type" n="-1" doc="Either export volume elements in the mesh with their fields with value 0 or faces elements in the mesh with their fields with value 1 (default is 0)" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="file_path" n="0" doc="path with vtk extension were the export occurs" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="1" doc="necessary if the first field or fields container don't have a mesh in their support" types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields" n="2" doc="fields exported" types="fields_container field" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="vtk_export" license="none" cat="serialization" plugin="vtk" cpp-name="vtk_export"></scripting-part></div><div class="operator" id="dynamic viscosity" scripting_name="dynamic_viscosity"plugin="core"cat="result"><h1 class="op-des-h1">result: dynamic viscosity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Dynamic Viscosity by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="dynamic_viscosity" license="none" cat="result" plugin="core" cpp-name="MU"></scripting-part></div><div class="operator" id="plastic strain XY" scripting_name="plastic_strain_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_XY" license="none" cat="result" plugin="core" cpp-name="EPPLXY"></scripting-part></div><div class="operator" id="hydrostatic pressure" scripting_name="hydrostatic_pressure"plugin="core"cat="result"><h1 class="op-des-h1">result: hydrostatic pressure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal hydrostatic pressure by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="hydrostatic_pressure" license="none" cat="result" plugin="core" cpp-name="ENL_HPRES"></scripting-part></div><div class="operator" id="compute stress von mises" scripting_name="compute_stress_von_mises"plugin="live post"cat="result"><h1 class="op-des-h1">result: compute stress von mises</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the stress from an elastic strain field. compute_total_strain limitations are applicable for stress computationGet the Von Mises equivalent stress."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scoping" n="1" doc="The element scoping on which the result is computed." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="Needed to get mesh and material ids. Optional if a data_sources have been connected." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Needed to get mesh and material ids. Optional if a streams_container have been connected." types="data_sources" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="Average the Elemental Nodal result to the requested location." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="strain" n="10" doc="Field/or fields container containing only the elastic strain field (element nodal)." types="fields_container field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="The computed result fields container (elemental nodal)." types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="compute_stress_von_mises" license="none" cat="result" plugin="live post" cpp-name="compute_stress_von_mises"></scripting-part></div><div class="operator" id="low pass (scoping)" scripting_name="scoping_low_pass"plugin="core"cat="filter"><h1 class="op-des-h1">filter: low pass (scoping)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="The low pass filter returns all the values below (but not equal to) the threshold value in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="field or fields container with only one field is expected" types="field fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="threshold" n="1" doc="a threshold scalar or a field containing one value is expected" types="double field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="both" n="2" doc="The default is false. If set to true, the complement of the filtered fields container is returned on output pin 1." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="scoping" n="0" doc="" types="scoping" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="scoping_low_pass" license="any_dpf_supported_increments" cat="filter" plugin="core" cpp-name="core::scoping::low_pass"></scripting-part></div><div class="operator" id="iso surfaces" scripting_name="iso_surfaces"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: iso surfaces</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Extract multiple iso-contours from mesh_cut operator and set it into a meshes container. If pin 1 is provided, "num_surfaces" iso-contours will be computed, ranging from "min_value" to "max_value" linearly. If pin 4 is provided, the iso-values are the one set by the user. The iso-values are stored into a FieldsContainer."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="Field containing the values for the iso-surface computation. The mesh can be retrieved from this field's support or through pin 2." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="num_surfaces" n="1" doc="If provided, iso_values are linearly computed between the min and the max of the field of results. If not, iso_values must be provided by the user through pin 4" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="2" doc="Mesh to compute the iso-surface from. Used when not given through the support of the field in pin 0." types="meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="slice_surfaces" n="3" doc="True: slicing will also take into account shell and skin elements. False: slicing will ignore shell and skin elements. The default is true." types="bool" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="vector_iso_values" n="4" doc="If provided, user defined iso_values to compute. If not provided, iso_values are linearly compute between the min and the max of the field of results." types="vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="meshes" n="0" doc="" types="meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="1" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="iso_surfaces" license="none" cat="mesh" plugin="core" cpp-name="iso_surfaces"></scripting-part></div><div class="operator" id="plastic strain YZ" scripting_name="plastic_strain_YZ"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain YZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains YZ shear component (12 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_YZ" license="none" cat="result" plugin="core" cpp-name="EPPLYZ"></scripting-part></div><div class="operator" id="plastic strain XZ" scripting_name="plastic_strain_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_XZ" license="none" cat="result" plugin="core" cpp-name="EPPLXZ"></scripting-part></div><div class="operator" id="workflow energy per harmonic" scripting_name="workflow_energy_per_harmonic"plugin="mapdl"cat="result"><h1 class="op-des-h1">result: workflow energy per harmonic</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Calculates the cumulated energy per harmonic in a multistage multiharmonic model."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="Master scoping. All harmonics will be intersected with this scoping." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="energy_type" n="2" doc="Type of energy to be processed: (0: Strain + Kinetic energy (default), 1: Strain energy, 2: Kinetic energy)" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="harmonic_energy" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="harmonic_energy_percentage" n="1" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="workflow_energy_per_harmonic" license="any_dpf_supported_increments" cat="result" plugin="mapdl" cpp-name="workflow_energy_per_harmonic"></scripting-part></div><div class="operator" id="plastic strain principal 3" scripting_name="plastic_strain_principal_3"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain principal 3</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains 3rd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_principal_3" license="none" cat="result" plugin="core" cpp-name="EPPL3"></scripting-part></div><div class="operator" id="plastic strain intensity" scripting_name="plastic_strain_intensity"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain intensity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component plastic strains, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_intensity" license="none" cat="result" plugin="core" cpp-name="EPPL_intensity"></scripting-part></div><div class="operator" id="plastic strain max_shear" scripting_name="plastic_strain_max_shear"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain max_shear</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component plastic strains, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_max_shear" license="none" cat="result" plugin="core" cpp-name="EPPL_max_shear"></scripting-part></div><div class="operator" id="low pass (timefreq)" scripting_name="timefreq_low_pass"plugin="core"cat="filter"><h1 class="op-des-h1">filter: low pass (timefreq)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="The low pass filter returns all the values below (but not equal to) the threshold value in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_freq_support" n="0" doc="" types="time_freq_support" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="threshold" n="1" doc="a threshold scalar or a field containing one value is expected" types="double field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="both" n="2" doc="The default is false. If set to true, the complement of the filtered fields container is returned on output pin 1." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="time_freq_support" n="0" doc="" types="time_freq_support" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="scoping" n="1" doc="" types="scoping" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="timefreq_low_pass" license="any_dpf_supported_increments" cat="filter" plugin="core" cpp-name="core::timefreq::low_pass"></scripting-part></div><div class="operator" id="band pass (field)" scripting_name="field_band_pass"plugin="core"cat="filter"><h1 class="op-des-h1">filter: band pass (field)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="The band pass filter returns all the values above (but not equal to) the minimum threshold value and below (but not equal to) the maximum threshold value in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="field or fields container with only one field is expected" types="field fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="min_threshold" n="1" doc="A minimum threshold scalar or a field containing one value is expected." types="double field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="max_threshold" n="2" doc="A maximum threshold scalar or a field containing one value is expected." types="double field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="field_band_pass" license="any_dpf_supported_increments" cat="filter" plugin="core" cpp-name="core::field::band_pass"></scripting-part></div><div class="operator" id="modal damping ratio" scripting_name="modal_damping_ratio"plugin="core"cat="math"><h1 class="op-des-h1">math: modal damping ratio</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes damping ratio for each mode shape as X_i = const + ratio_i + m_coefficient / (2*omega_i) + k_coefficient * omega_i/2."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="natural_freq" n="0" doc="input vector expects natural frequencies." types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="const_ratio" n="1" doc="constant modal damping ratio" types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="ratio_by_modes" n="2" doc="modal damping ratio for each mode shape" types="vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="m_coefficient" n="3" doc="global mass matrix multiplier" types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="k_coefficient" n="4" doc="global stiffness matrix multiplier" types="double" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="field of modal damping ratio." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="modal_damping_ratio" license="any_dpf_supported_increments" cat="math" plugin="core" cpp-name="modal_damping_ratio"></scripting-part></div><div class="operator" id="thermal strain X" scripting_name="thermal_strain_X"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_X" license="none" cat="result" plugin="core" cpp-name="ETHX"></scripting-part></div><div class="operator" id="thermal strain Y" scripting_name="thermal_strain_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains YY normal component (11 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_Y" license="none" cat="result" plugin="core" cpp-name="ETHY"></scripting-part></div><div class="operator" id="equivalent radiated power" scripting_name="equivalent_radiated_power"plugin="core"cat="result"><h1 class="op-des-h1">result: equivalent radiated power</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Compute the Equivalent Radiated Power (ERP)"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="the input field container expects displacements fields" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="1" doc="the mesh region in this pin has to be boundary or skin mesh" types="abstract_meshed_region meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="time_scoping" n="2" doc="load step number (if it's specified, the ERP is computed only on the substeps of this step) or time scoping" types="int32 vector<int32> scoping" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mass_density" n="3" doc="mass density (if it's not specified, default value of the air is applied)." types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="speed_of_sound" n="4" doc="speed of sound (if it's not specified, default value of the speed of sound in the air is applied)." types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="erp_type" n="5" doc="if this pin is set to 0, the classical ERP is computed, 1 the corrected ERP is computed (a mesh of one face has to be given in the pin 1) and 2 the enhanced ERP is computed. Default is 0." types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="boolean" n="6" doc="if this pin is set to true, the ERP level in dB is computed" types="bool" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="factor" n="7" doc="erp reference value. Default is 1E-12" types="double" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="equivalent_radiated_power" license="any_dpf_supported_increments" cat="result" plugin="core" cpp-name="ERP"></scripting-part></div><div class="operator" id="thermal strain Z" scripting_name="thermal_strain_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains ZZ normal component (22 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_Z" license="none" cat="result" plugin="core" cpp-name="ETHZ"></scripting-part></div><div class="operator" id="merge scopings containers" scripting_name="merge_scopings_containers"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge scopings containers</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of scopings containers into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scopings_containers" n="0" doc="A vector of scopings containers to merge or scopings containers from pin 0 to ..." types="vector<shared_ptr<scopings_container>> scopings_container" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_scopings_container" n="0" doc="" types="scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_scopings_containers" license="none" cat="utility" plugin="core" cpp-name="merge::scopings_container"></scripting-part></div><div class="operator" id="accumulate over label" scripting_name="accumulate_over_label_fc"plugin="core"cat="math"><h1 class="op-des-h1">math: accumulate over label</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Compute the component-wise sum over all the fields that have the same ID as the label set as input in the fields container. This computation can be incremental. If the input fields container is connected and the operator is run multiple times, the output field will be on all the connected inputs."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="label" n="1" doc="Label of the fields container where it should operate." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="incremental" default="true" doc="This operator can be run several times with different inputs so that the output will take all the inputs of the different runs into account. It can be used to save memory. For example, a large time scoping can be split in smaller ranges of time to compute the result range by range." types="bool" ></config-spec><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="accumulate_over_label_fc" license="none" cat="math" plugin="core" cpp-name="accumulate_over_label_fc"></scripting-part></div><div class="operator" id="thermal strain XY" scripting_name="thermal_strain_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_XY" license="none" cat="result" plugin="core" cpp-name="ETHXY"></scripting-part></div><div class="operator" id="thermal strain YZ" scripting_name="thermal_strain_YZ"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain YZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains YZ shear component (12 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_YZ" license="none" cat="result" plugin="core" cpp-name="ETHYZ"></scripting-part></div><div class="operator" id="thermal strain principal 1" scripting_name="thermal_strain_principal_1"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain principal 1</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains 1st principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_principal_1" license="none" cat="result" plugin="core" cpp-name="ETH1"></scripting-part></div><div class="operator" id="same anys?" scripting_name="identical_anys"plugin="core"cat="logic"><h1 class="op-des-h1">logic: same anys?</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Takes two Any objects and compares them.Supported types: Field, FieldsContainer, Mesh, MeshesContainer, PropertyField, PropertyFieldsContainer, Scoping, ScopingsContainer, StringField, standard types (double, int, string, vector of int, doubles, string). Note: all inputs related to fields, mesh, and so on are passed to each property check."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="anyA" n="0" doc="" types="any" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="anyB" n="1" doc="" types="any" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="double_value" n="2" doc="Double positive small value. Smallest value considered during the comparison step. All the absolute values in the field less than this value are considered null, (default value: 1.0e-14)." types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="double_tolerance" n="3" doc="Double relative tolerance. Maximum tolerance gap between two compared values. Values within relative tolerance are considered identical. Formula is (v1-v2)/v2 < relativeTol. Default is 0.001." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="compare_auxiliary" n="4" doc="For meshes and meshescontainer: compare auxiliary data (i.e property fields, scopings...). Default value is 'false'." types="bool" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="included" n="0" doc="bool (true if belongs...)" types="bool" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="message" n="1" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="identical_anys" license="none" cat="logic" plugin="core" cpp-name="compare::any"></scripting-part></div><div class="operator" id="thermal strain principal 2" scripting_name="thermal_strain_principal_2"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain principal 2</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains 2nd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_principal_2" license="none" cat="result" plugin="core" cpp-name="ETH2"></scripting-part></div><div class="operator" id="thermal strain principal 3" scripting_name="thermal_strain_principal_3"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain principal 3</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains 3rd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_principal_3" license="none" cat="result" plugin="core" cpp-name="ETH3"></scripting-part></div><div class="operator" id="serializer" scripting_name="serializer"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: serializer</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Take any input and serialize them in a file."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="stream_type" n="-1" doc="0 for ASCII (default), and 1 for binary" types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="file_path" n="0" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="any_input" n="1" doc="any input" types="any" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="file_path" n="0" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="serializer" license="none" cat="serialization" plugin="core" cpp-name="serializer"></scripting-part></div><div class="operator" id="wall shear stress" scripting_name="wall_shear_stress"plugin="core"cat="result"><h1 class="op-des-h1">result: wall shear stress</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Wall Shear Stress by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="wall_shear_stress" license="none" cat="result" plugin="core" cpp-name="TAU"></scripting-part></div><div class="operator" id="velocity" scripting_name="velocity"plugin="core"cat="result"><h1 class="op-des-h1">result: velocity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal velocities by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="velocity" license="none" cat="result" plugin="core" cpp-name="V"></scripting-part></div><div class="operator" id="reaction force" scripting_name="reaction_force"plugin="core"cat="result"><h1 class="op-des-h1">result: reaction force</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal reaction forces by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="reaction_force" license="none" cat="result" plugin="core" cpp-name="RF"></scripting-part></div><div class="operator" id="velocity X" scripting_name="velocity_X"plugin="core"cat="result"><h1 class="op-des-h1">result: velocity X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal velocities X component of the vector (1st component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="velocity_X" license="none" cat="result" plugin="core" cpp-name="VX"></scripting-part></div><div class="operator" id="reaction force X" scripting_name="reaction_force_X"plugin="core"cat="result"><h1 class="op-des-h1">result: reaction force X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal reaction forces X component of the vector (1st component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="reaction_force_X" license="none" cat="result" plugin="core" cpp-name="RFX"></scripting-part></div><div class="operator" id="cartesian to spherical coordinates (fields container)" scripting_name="cartesian_to_spherical_fc"plugin="core"cat="geo"><h1 class="op-des-h1">geo: cartesian to spherical coordinates (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Converts 3D field from cartesian coordinates to spherical coordinates."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="cartesian_to_spherical_fc" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="cartesian_to_spherical_fc"></scripting-part></div><div class="operator" id="global external work (LSDyna)" scripting_name="global_external_work"plugin="core"cat="result"><h1 class="op-des-h1">result: global external work (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Global External Work (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="global_external_work" license="none" cat="result" plugin="core" cpp-name="GLOB_EW"></scripting-part></div><div class="operator" id="acceleration" scripting_name="acceleration"plugin="core"cat="result"><h1 class="op-des-h1">result: acceleration</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal accelerations by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="acceleration" license="none" cat="result" plugin="core" cpp-name="A"></scripting-part></div><div class="operator" id="element centroids" scripting_name="element_centroids"plugin="core"cat="result"><h1 class="op-des-h1">result: element centroids</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute coordinate of the elemental centroids by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_centroids" license="none" cat="result" plugin="core" cpp-name="centroids"></scripting-part></div><div class="operator" id="acceleration Z" scripting_name="acceleration_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: acceleration Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal accelerations Z component of the vector (3rd component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="acceleration_Z" license="none" cat="result" plugin="core" cpp-name="AZ"></scripting-part></div><div class="operator" id="rescope (fields container)" scripting_name="rescope_fc"plugin="core"cat="scoping"><h1 class="op-des-h1">scoping: rescope (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Rescopes a field on the given scoping. If an ID does not exist in the original field, the default value (in 2) is used when defined."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="" types="scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="default_value" n="2" doc="If pin 2 is used, the IDs not found in the field are added with this default value." types="double vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="rescope_fc" license="none" cat="scoping" plugin="core" cpp-name="Rescope_fc"></scripting-part></div><div class="operator" id="workflow to workflow_topology" scripting_name="workflow_to_workflow_topology"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: workflow to workflow_topology</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Creates a GenericDataContainer based on WorkflowTopology structure from a Workflow object, allowing to access its operators, operator connections, data connections, and exposed pins."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="workflow" n="0" doc="" types="workflow" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="workflow_topology" n="0" doc="" types="generic_data_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="workflow_to_workflow_topology" license="none" cat="serialization" plugin="core" cpp-name="workflow_to_workflow_topology"></scripting-part></div><div class="operator" id="displacement" scripting_name="displacement"plugin="core"cat="result"><h1 class="op-des-h1">result: displacement</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal displacements by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="displacement" license="none" cat="result" plugin="core" cpp-name="U"></scripting-part></div><div class="operator" id="electric field Z" scripting_name="electric_field_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: electric field Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute electric field Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_field_Z" license="none" cat="result" plugin="core" cpp-name="EFZ"></scripting-part></div><div class="operator" id="displacement X" scripting_name="displacement_X"plugin="core"cat="result"><h1 class="op-des-h1">result: displacement X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal displacements X component of the vector (1st component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="displacement_X" license="none" cat="result" plugin="core" cpp-name="UX"></scripting-part></div><div class="operator" id="force_summation" scripting_name="force_summation"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: force_summation</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the sum of elemental forces contribution on a set of nodes in Global Coordinate System. Equivalent to MAPDL FSUM & NFORCE commands. Supports Static, Transient, Modal & Harmonic analysis for thermal and structural degrees of freedom."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="default = all time steps" types="scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="nodal_scoping" n="1" doc="Nodal Scoping. Set of nodes in which elemental contribution forces will be accumulated (default = all nodes)" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="elemental_scoping" n="2" doc="Elemental Scoping. Set of elements contributing to the force calcuation. (default = all elements)" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="Streams container. Optional if using data sources." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Data sources. Optional if using a streams container." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="force_type" n="5" doc="Type of force to be processed (0 - default: Total forces (static, damping, and inertia)., 1: Static forces, 2: Damping forces, 3: Inertia forces)" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="spoint" n="6" doc="Coordinate field of a point for moment summations. Defaults to (0,0,0)." types="field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="force_accumulation" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="moment_accumulation" n="1" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="heat_accumulation" n="2" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="forces_on_nodes" n="10" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="moments_on_nodes" n="11" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="heats_on_nodes" n="12" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="force_summation" license="any_dpf_supported_increments" cat="averaging" plugin="core" cpp-name="force_summation"></scripting-part></div><div class="operator" id="displacement Y" scripting_name="displacement_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: displacement Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal displacements Y component of the vector (2nd component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="displacement_Y" license="none" cat="result" plugin="core" cpp-name="UY"></scripting-part></div><div class="operator" id="electric field X" scripting_name="electric_field_X"plugin="core"cat="result"><h1 class="op-des-h1">result: electric field X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute electric field X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_field_X" license="none" cat="result" plugin="core" cpp-name="EFX"></scripting-part></div><div class="operator" id="displacement Z" scripting_name="displacement_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: displacement Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal displacements Z component of the vector (3rd component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="displacement_Z" license="none" cat="result" plugin="core" cpp-name="UZ"></scripting-part></div><div class="operator" id="heat flux X" scripting_name="heat_flux_X"plugin="core"cat="result"><h1 class="op-des-h1">result: heat flux X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute heat flux X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="heat_flux_X" license="none" cat="result" plugin="core" cpp-name="TFX"></scripting-part></div><div class="operator" id="heat flux Y" scripting_name="heat_flux_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: heat flux Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute heat flux Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="heat_flux_Y" license="none" cat="result" plugin="core" cpp-name="TFY"></scripting-part></div><div class="operator" id="electric field" scripting_name="electric_field"plugin="core"cat="result"><h1 class="op-des-h1">result: electric field</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute electric field by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_field" license="none" cat="result" plugin="core" cpp-name="EF"></scripting-part></div><div class="operator" id="total contact moment" scripting_name="total_contact_moment"plugin="core"cat="result"><h1 class="op-des-h1">result: total contact moment</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute total contact moment by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="total_contact_moment" license="none" cat="result" plugin="core" cpp-name="CFTTOT"></scripting-part></div><div class="operator" id="heat flux Z" scripting_name="heat_flux_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: heat flux Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute heat flux Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="heat_flux_Z" license="none" cat="result" plugin="core" cpp-name="TFZ"></scripting-part></div><div class="operator" id="serialize to hdf5" scripting_name="serialize_to_hdf5"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: serialize to hdf5</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="This operator is deprecated: use 'hdf5::h5dpf::make_result_file' instead. Serialize the inputs in an hdf5 format."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="file_path" n="0" doc="output file path with .h5 extension" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="export_floats" n="1" doc="converts double to float to reduce file size (default is true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="export_flat_vectors" n="2" doc="if true, vectors and matrices data are exported flat (x1,y1,z1,x2,y2,z2..) (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data" n="3" doc="only the data set explicitly to export is exported" types="" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="serialize_to_hdf5" license="none" cat="serialization" plugin="core" cpp-name="serialize_to_hdf5"></scripting-part></div><div class="operator" id="element orientations" scripting_name="element_orientations"plugin="core"cat="result"><h1 class="op-des-h1">result: element orientations</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element euler angles by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_orientations" license="none" cat="result" plugin="core" cpp-name="EUL"></scripting-part></div><div class="operator" id="element orientations Y" scripting_name="element_orientations_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: element orientations Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element euler angles Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_orientations_Y" license="none" cat="result" plugin="core" cpp-name="EULY"></scripting-part></div><div class="operator" id="magnetic field Z" scripting_name="magnetic_field_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic field Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Field Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_field_Z" license="none" cat="result" plugin="core" cpp-name="MFZ"></scripting-part></div><div class="operator" id="elemental mean (fields container)" scripting_name="elemental_mean_fc"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: elemental mean (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the average of a multi-entity container of fields, (ElementalNodal -> Elemental), (NodalElemental -> Nodal). If the input fields are mixed shell/solid and collapseShellLayers is false, then the fields could be split by element shape and the output fields container would have an elshape label depending on the e_shell_layer and merge_solid_shell inputs (if e_shell_layer is not specified, the fields are split; if it is specified, the fields can be split based on merge_solid_shell).If collapseShellLayers is true, all available shell layers are collapsed and shells and solid fields are always merged."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="collapse_shell_layers" n="1" doc="If true, the data across different shell layers is averaged as well (default is false)." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="force_averaging" n="2" doc="If true you average, if false you just sum." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="scoping" n="3" doc="Average only on these elements. If it is a scoping container, the label must correspond to the one of the fields container." types="scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="abstract_meshed_region" n="4" doc="The mesh region in this pin is used to perform the averaging. It is used if there is no fields support." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merge_solid_shell" n="26" doc="For shell/solid mixed fields, group in the same field all solids and shells (false by default). This pin only has an effect when collapse_shell_layers is false and a value for e_shell_layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="e_shell_layer" n="27" doc="0: Top, 1: Bottom, 2: BottomTop, 3: Mid, 4: BottomTopMid. This pin only has an effect when collapse_shell_layers is false." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elemental_mean_fc" license="none" cat="averaging" plugin="core" cpp-name="entity_average_fc"></scripting-part></div><div class="operator" id="magnetic field Y" scripting_name="magnetic_field_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic field Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Field Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_field_Y" license="none" cat="result" plugin="core" cpp-name="MFY"></scripting-part></div><div class="operator" id="split mesh wrt property" scripting_name="split_mesh"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: split mesh wrt property</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Split the input mesh into several meshes based on a given property (material property be default)"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh_scoping" n="1" doc="Scoping" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="" types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property" n="13" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="meshes" n="0" doc="" types="meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="split_mesh" license="any_dpf_supported_increments" cat="mesh" plugin="core" cpp-name="split_mesh"></scripting-part></div><div class="operator" id="element orientations Z" scripting_name="element_orientations_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: element orientations Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element euler angles Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_orientations_Z" license="none" cat="result" plugin="core" cpp-name="EULZ"></scripting-part></div><div class="operator" id="temperature gradient" scripting_name="temperature_grad"plugin="core"cat="result"><h1 class="op-des-h1">result: temperature gradient</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Temperature Gradient by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="temperature_grad" license="none" cat="result" plugin="core" cpp-name="TG"></scripting-part></div><div class="operator" id="cgns result provider" scripting_name="cgns_result_provider"plugin="cgns"cat="result"><h1 class="op-des-h1">result: cgns result provider</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute names result from result streams."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output" types="scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The scoping's location indicates whether nodes or elements are asked. Using scopings container enables to split the result fields container in domains" types="scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="result_name" n="17" doc="name of the result to read. By default the name of the operator is taken." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="Optional zone name/Id of the mesh." types="scoping vector<int32> int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields" n="0" doc="Results" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="cgns_result_provider" license="none" cat="result" plugin="cgns" cpp-name="cgns::cgns::result_provider"></scripting-part></div><div class="operator" id="temperature gradient X" scripting_name="temperature_grad_X"plugin="core"cat="result"><h1 class="op-des-h1">result: temperature gradient X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Temperature Gradient X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="temperature_grad_X" license="none" cat="result" plugin="core" cpp-name="TGX"></scripting-part></div><div class="operator" id="entropy" scripting_name="entropy"plugin="core"cat="result"><h1 class="op-des-h1">result: entropy</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Entropy by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="entropy" license="none" cat="result" plugin="core" cpp-name="S_S"></scripting-part></div><div class="operator" id="volume fraction" scripting_name="volume_fraction"plugin="core"cat="result"><h1 class="op-des-h1">result: volume fraction</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Volume Fraction by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="volume_fraction" license="none" cat="result" plugin="core" cpp-name="VOF"></scripting-part></div><div class="operator" id="temperature gradient Y" scripting_name="temperature_grad_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: temperature gradient Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Temperature Gradient Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="temperature_grad_Y" license="none" cat="result" plugin="core" cpp-name="TGY"></scripting-part></div><div class="operator" id="temperature gradient Z" scripting_name="temperature_grad_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: temperature gradient Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Temperature Gradient Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="temperature_grad_Z" license="none" cat="result" plugin="core" cpp-name="TGZ"></scripting-part></div><div class="operator" id="elemental summable miscellaneous data" scripting_name="smisc"plugin="core"cat="result"><h1 class="op-des-h1">result: elemental summable miscellaneous data</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental summable miscellaneous data by calling the readers defined by the datasources. Modal superposition (on demand expansion) and cyclic cxpansion procedures are supported, however, you should verify that the linear combination is applicable for the associated element according to the MAPDL documentation description of each item."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="item_index" n="10" doc="Index of requested item." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="num_components" n="11" doc="Number of components for the requested item." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="smisc" license="none" cat="result" plugin="core" cpp-name="SMISC"></scripting-part></div><div class="operator" id="magnetic field" scripting_name="magnetic_field"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic field</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Field by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_field" license="none" cat="result" plugin="core" cpp-name="MF"></scripting-part></div><div class="operator" id="compute stress Z" scripting_name="compute_stress_Z"plugin="live post"cat="result"><h1 class="op-des-h1">result: compute stress Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the stress from an elastic strain field. compute_total_strain limitations are applicable for stress computation Get the ZZ normal component (22 component)."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scoping" n="1" doc="The element scoping on which the result is computed." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="Needed to get mesh and material ids. Optional if a data_sources have been connected." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Needed to get mesh and material ids. Optional if a streams_container have been connected." types="data_sources" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="Average the Elemental Nodal result to the requested location." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="strain" n="10" doc="Field/or fields container containing only the elastic strain field (element nodal)." types="fields_container field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="The computed result fields container (elemental nodal)." types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="compute_stress_Z" license="none" cat="result" plugin="live post" cpp-name="compute_stress_Z"></scripting-part></div><div class="operator" id="part eroded kinetic energy (LSDyna)" scripting_name="part_eroded_kinetic_energy"plugin="core"cat="result"><h1 class="op-des-h1">result: part eroded kinetic energy (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Part Eroded Kinetic Energy (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="entity_scoping" n="6" doc="entity (part for matsum, interface for rcforc) where the result will be scoped" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="part_eroded_kinetic_energy" license="none" cat="result" plugin="core" cpp-name="M_ERKE"></scripting-part></div><div class="operator" id="magnetic field X" scripting_name="magnetic_field_X"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic field X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Field X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_field_X" license="none" cat="result" plugin="core" cpp-name="MFX"></scripting-part></div><div class="operator" id="string deserializer" scripting_name="string_deserializer"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: string deserializer</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Takes a string generated by the serializer and deserializes it into DPF's entities."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="stream_type" n="-1" doc="0 for string (default), and 1 for binary" types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="serialized_string" n="0" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="any_output" n="1" doc="number and types of outputs corresponding of the inputs used in the serialization" types="any" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="string_deserializer" license="none" cat="serialization" plugin="core" cpp-name="string_deserializer"></scripting-part></div><div class="operator" id="magnetic flux density" scripting_name="magnetic_flux_density"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic flux density</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Flux Density by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_flux_density" license="none" cat="result" plugin="core" cpp-name="MFD"></scripting-part></div><div class="operator" id="magnetic flux density X" scripting_name="magnetic_flux_density_X"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic flux density X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Flux Density X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_flux_density_X" license="none" cat="result" plugin="core" cpp-name="MFDX"></scripting-part></div><div class="operator" id="magnetic flux density Y" scripting_name="magnetic_flux_density_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic flux density Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Flux Density Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_flux_density_Y" license="none" cat="result" plugin="core" cpp-name="MFDY"></scripting-part></div><div class="operator" id="nodal force" scripting_name="nodal_force"plugin="core"cat="result"><h1 class="op-des-h1">result: nodal force</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal forces by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="nodal_force" license="none" cat="result" plugin="core" cpp-name="F"></scripting-part></div><div class="operator" id="magnetic flux density Z" scripting_name="magnetic_flux_density_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic flux density Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Flux Density Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_flux_density_Z" license="none" cat="result" plugin="core" cpp-name="MFDZ"></scripting-part></div><div class="operator" id="electric field Y" scripting_name="electric_field_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: electric field Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute electric field Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_field_Y" license="none" cat="result" plugin="core" cpp-name="EFY"></scripting-part></div><div class="operator" id="electric flux density Z" scripting_name="electric_flux_density_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: electric flux density Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Electric flux density Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_flux_density_Z" license="none" cat="result" plugin="core" cpp-name="EFDZ"></scripting-part></div><div class="operator" id="element nodal forces" scripting_name="element_nodal_forces"plugin="core"cat="result"><h1 class="op-des-h1">result: element nodal forces</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal forces by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_force_components" n="200" doc="If this pin is set to true, the output fields container splits the ENF by degree of freedom ('dof' label, 0 for translation, 1 for rotation, 2 for temperature) and derivative order ('derivative_order' label, 0 for stiffness terms, 1 for damping terms and 2 for inertial terms). Default is false." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_nodal_forces" license="none" cat="result" plugin="core" cpp-name="ENF"></scripting-part></div><div class="operator" id="compute total strain Z" scripting_name="compute_total_strain_Z"plugin="live post"cat="result"><h1 class="op-des-h1">result: compute total strain Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the strain from a displacement field.
+- 'all_available_properties' option set to 0 will return all possible properties" types="abstract_data_tree" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="mesh" n="0" doc="" types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="permissive" default="false" doc="If this option is set to true, warning checks (like unit or data sizes) won't be done." types="bool" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mesh_provider" license="none" cat="mesh" plugin="core" cpp-name="mesh_provider"></scripting-part></div><div class="operator" id="gasket inelastic closure" scripting_name="gasket_inelastic_closure"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket inelastic closure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket inelastic closure by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_inelastic_closure" license="none" cat="result" plugin="core" cpp-name="GKDI"></scripting-part></div><div class="operator" id="export symbolic workflow" scripting_name="export_symbolic_workflow"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: export symbolic workflow</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Transforms a Workflow into a symbolic Workflow and writes it to a file (if a path is set in input) or string"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="workflow" n="0" doc="" types="workflow" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="path" n="1" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="format" n="2" doc="0 is ASCII format and 1 is binary, default is 0." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="options" n="3" doc="1 copies connections with its data, 2 forwards named inputs and outputs names, 7 copies connections of named inputs and ouputs with their data. default is 7." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="data_sources" n="0" doc="" types="data_sources string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="export_symbolic_workflow" license="any_dpf_supported_increments" cat="serialization" plugin="core" cpp-name="export_symbolic_workflow"></scripting-part></div><div class="operator" id="write cms rbd file" scripting_name="write_cms_rbd_file"plugin="core"cat="result"><h1 class="op-des-h1">result: write cms rbd file</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Write the invariant terms and the model data in a cms_rbd file"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="model_data" n="0" doc="data describing the finite element model" types="property_field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="center_of_mass" n="1" doc="center of mass of the body" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="inertia_relief" n="2" doc="inertia matrix" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="model_size" n="3" doc="size of the diagonal box containing the body" types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="master_node_coordinates" n="4" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="v_trsf" n="5" doc="translational and rotational shape functions" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="k_mat" n="6" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mass_mat" n="7" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="c_mat" n="8" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="rhs" n="9" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dn" n="10" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dr_cross_n" n="11" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="drn" n="12" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dn_cross_n" n="13" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnx_y" n="14" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dny_y" n="15" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnz_y" n="16" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dyx_n" n="17" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dyy_n" n="18" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dyz_n" n="19" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnxn" n="20" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnyn" n="21" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="dnzn" n="22" doc="" types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="file_path" n="23" doc="path with cms_rbd extension where the export occurs" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="data_sources" n="0" doc="Data Source containing the cms_rbd file generated." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="write_cms_rbd_file" license="none" cat="result" plugin="core" cpp-name="write_cms_rbd_file"></scripting-part></div><div class="operator" id="gasket inelastic closure X" scripting_name="gasket_inelastic_closure_X"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket inelastic closure X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket inelastic closure XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_inelastic_closure_X" license="none" cat="result" plugin="core" cpp-name="GKDIX"></scripting-part></div><div class="operator" id="beam properties" scripting_name="beam_properties"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: beam properties</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads the beam's properties from the result files contained in the streams or data sources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams" n="3" doc="Result file container allowed to be kept open to cache data." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Result file path container, used if no streams are set." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="mesh_out" n="0" doc="This mesh updates a new map containing a field of the beam's properties if there is at least one beam in mesh." types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_type_section_id" n="1" doc="This field contains the section ID of beams. 1:REC; 3:CSOLID, 4:CTUBE, 5:CHAN, 6:Z, 7:L, 8:I, 9:T, 11:HATS, 12:HREC." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_area" n="2" doc="This field contains the area of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_moment_inertia" n="3" doc="This field contains the inertia moment of beams. Iyy, Iyz, Izz." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_geometry" n="4" doc="This field contains the geometry of beams. REC:b,h. CSOLID:Ri. CTUBE:Ri, Re. CHAN:w1,w2,w3,t1,t2,t3. Z:w1,w2,w3,t1,t2,t3. L:w1,w2,t1,t2. I:w1,w2,w3,t1,t2,t3. T:w1,w2,t1,t2. HATS: w1,w2,w3,w4,t1,t2,t3,t4. HREC:w1,w2,t1,t2,t3,t4." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_young_modulus" n="5" doc="This field contains the Young's modulus of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_poisson_ratio" n="6" doc="This field contains the Poisson's ratio of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_shear_modulus" n="7" doc="This field contains the Shear Modulus of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_beam_length" n="8" doc="This field contains the length of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_torsion_constant" n="9" doc="This field contains the Torsion Constant of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_warping_constant" n="10" doc="This field contains the Warping Constant of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_offset_type" n="11" doc="This field contains offset type of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_offset_y" n="12" doc="This field contains offset y of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_offset_z" n="13" doc="This field contains offset z of beams." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="beam_properties" license="none" cat="mesh" plugin="core" cpp-name="beam_properties"></scripting-part></div><div class="operator" id="gasket inelastic closure XZ" scripting_name="gasket_inelastic_closure_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket inelastic closure XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket inelastic closure XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_inelastic_closure_XZ" license="none" cat="result" plugin="core" cpp-name="GKDIXZ"></scripting-part></div><div class="operator" id="gasket thermal closure" scripting_name="gasket_thermal_closure"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket thermal closure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket thermal closure by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_thermal_closure" license="none" cat="result" plugin="core" cpp-name="GKTH"></scripting-part></div><div class="operator" id="gasket thermal closure X" scripting_name="gasket_thermal_closure_X"plugin="core"cat="result"><h1 class="op-des-h1">result: gasket thermal closure X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental gasket thermal closure XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="gasket_thermal_closure_X" license="none" cat="result" plugin="core" cpp-name="GKTHX"></scripting-part></div><div class="operator" id="elastic strain X" scripting_name="elastic_strain_X"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_X" license="none" cat="result" plugin="core" cpp-name="EPELX"></scripting-part></div><div class="operator" id="elastic strain Y" scripting_name="elastic_strain_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains YY normal component (11 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_Y" license="none" cat="result" plugin="core" cpp-name="EPELY"></scripting-part></div><div class="operator" id="elastic strain Z" scripting_name="elastic_strain_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains ZZ normal component (22 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_Z" license="none" cat="result" plugin="core" cpp-name="EPELZ"></scripting-part></div><div class="operator" id="merge weighted fields containers" scripting_name="merge_weighted_fields_containers"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge weighted fields containers</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of fields containers into a unique one, applying a weight on the sum of the fields."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="sum_merge" n="-3" doc="Default is false. If true, redundant quantities are summed instead of being ignored." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merged_fields_support" n="-2" doc="Already merged field support." types="abstract_field_support" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merged_fields_containers_support" n="-1" doc="Already merged fields containers support." types="abstract_field_support umap<string,shared_ptr<abstract_field_support>>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_containers" n="0" doc="A vector of fields containers to merge or fields containers from pin 0 to ..." types="vector<shared_ptr<fields_container>> fields_container" optional="false"ellipsis="true"inplace="false"></pin-def><pin-def name="weights" n="1000" doc="Weights to apply to each field from pin 1000 to ..." types="vector<shared_ptr<class dataProcessing::DpfTypeCollection<class dataProcessing::CPropertyField>>> class dataProcessing::DpfTypeCollection<class dataProcessing::CPropertyField>" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="read_inputs_in_parallel" default="false" doc="If this option is set to true, the operator's inputs will be evaluated in parallel." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_weighted_fields_containers" license="none" cat="utility" plugin="core" cpp-name="merge::weighted_fields_container"></scripting-part></div><div class="operator" id="min/max over time" scripting_name="mechanical::min_max_over_time"plugin="core"cat="math"><h1 class="op-des-h1">math: min/max over time</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Evaluates minimum/maximum over time/frequency."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="int32" n="5" doc="Define min or max." types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field_container_1" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="field_container_2" n="1" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mechanical::min_max_over_time" license="none" cat="math" plugin="core" cpp-name="mechanical::min_max_over_time"></scripting-part></div><div class="operator" id="global energy ratio without eroded energy (LSDyna)" scripting_name="global_energy_ratio_wo_eroded"plugin="core"cat="result"><h1 class="op-des-h1">result: global energy ratio without eroded energy (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Global Energy ratio without Eroded Energy (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="global_energy_ratio_wo_eroded" license="none" cat="result" plugin="core" cpp-name="GLOB_ENG_ER"></scripting-part></div><div class="operator" id="merge fields containers" scripting_name="merge_fields_containers"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge fields containers</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of fields containers into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="should_merge_named_selections" n="-200" doc="For some result files (such as RST), the scoping on names selection is duplicated through all the distributed files.If this pin is false, the merging process is skipped. If it is true, this scoping is merged. Default is true." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sum_merge" n="-3" doc="Default is false. If true, redundant quantities are summed instead of being ignored." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merged_fields_support" n="-2" doc="Already merged field support." types="abstract_field_support" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merged_fields_containers_support" n="-1" doc="Already merged fields containers support." types="abstract_field_support umap<string,shared_ptr<abstract_field_support>>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_containers" n="0" doc="A vector of fields containers to merge or fields containers from pin 0 to ..." types="vector<shared_ptr<fields_container>> fields_container" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="read_inputs_in_parallel" default="false" doc="If this option is set to true, the operator's inputs will be evaluated in parallel." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_fields_containers" license="none" cat="utility" plugin="core" cpp-name="merge::fields_container"></scripting-part></div><div class="operator" id="elastic strain XY" scripting_name="elastic_strain_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_XY" license="none" cat="result" plugin="core" cpp-name="EPELXY"></scripting-part></div><div class="operator" id="elastic strain YZ" scripting_name="elastic_strain_YZ"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain YZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains YZ shear component (12 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_YZ" license="none" cat="result" plugin="core" cpp-name="EPELYZ"></scripting-part></div><div class="operator" id="interface contact mass (LSDyna)" scripting_name="interface_contact_mass"plugin="core"cat="result"><h1 class="op-des-h1">result: interface contact mass (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Interface Contact Mass (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="entity_scoping" n="6" doc="entity (part for matsum, interface for rcforc) where the result will be scoped" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="interface_contact_mass" license="none" cat="result" plugin="core" cpp-name="R_CMass"></scripting-part></div><div class="operator" id="eigen values (fields container)" scripting_name="eigen_values_fc"plugin="core"cat="invariant"><h1 class="op-des-h1">invariant: eigen values (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the element-wise Eigen values of all the tensor fields of a fields container."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="eigen_values_fc" license="none" cat="invariant" plugin="core" cpp-name="eig_values_fc"></scripting-part></div><div class="operator" id="elastic strain XZ" scripting_name="elastic_strain_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_XZ" license="none" cat="result" plugin="core" cpp-name="EPELXZ"></scripting-part></div><div class="operator" id="mesh property provider" scripting_name="mesh_property_provider"plugin="core"cat="metadata"><h1 class="op-des-h1">metadata: mesh property provider</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads a property related to the mesh, defined by its name, by calling the readers defined by the data sources. These properties can be used to fill in the mesh."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh_scoping" n="1" doc="Retrieves a property field on a subset of elements or nodes." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="streams (result file container) (optional)" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="If the stream is null, retrieves the file path from the data sources." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property_name" n="13" doc="Supported property names are: 'mat', 'named_selection', 'named_selection_names', 'apdl_element_type', 'section', 'elprops', 'keyopt_1' to 'keyopt_18'." types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property_identifier" n="17" doc="Retrieves a property at a given index or by name. For example, a named selection's number or a named selection's name." types="int32 string" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="property" n="0" doc="Returns a property field for properties: 'mat', 'apdl_element_type', 'section', 'elprops', 'keyopt_1' to 'keyopt_18' (or any mesh's property field), a scoping for properties:'named_selection', a string field for properties: 'named_selection_names'." types="scoping property_field string_field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mesh_property_provider" license="none" cat="metadata" plugin="core" cpp-name="mesh_property_provider"></scripting-part></div><div class="operator" id="rigid transformation" scripting_name="rigid_transformation"plugin="core"cat="result"><h1 class="op-des-h1">result: rigid transformation</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Extracts rigid body motions from a displacement in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="streams (result file container) (optional)" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="If the stream is null, retrieves the file path from the data sources." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="rigid_transformation" license="none" cat="result" plugin="core" cpp-name="rigid_transformation_provider"></scripting-part></div><div class="operator" id="elastic strain principal 1" scripting_name="elastic_strain_principal_1"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain principal 1</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains 1st principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_principal_1" license="none" cat="result" plugin="core" cpp-name="EPEL1"></scripting-part></div><div class="operator" id="elastic strain principal 2" scripting_name="elastic_strain_principal_2"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain principal 2</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains 2nd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_principal_2" license="none" cat="result" plugin="core" cpp-name="EPEL2"></scripting-part></div><div class="operator" id="scoping normals" scripting_name="normals"plugin="core"cat="geo"><h1 class="op-des-h1">geo: scoping normals</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="compute the normals at the given nodes or element scoping based on the given mesh (first version, the element normal is only handled on the shell elements)"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh" n="0" doc="" types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="field" n="3" doc="" types="field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="normals" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="normals_provider"></scripting-part></div><div class="operator" id="merge scopings" scripting_name="merge_scopings"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge scopings</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of scopings into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scopings" n="0" doc="Either a scopings container, a vector of scopings to merge, or scopings from pin 0 to ..." types="scoping scopings_container vector<shared_ptr<scoping>>" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_scoping" n="0" doc="" types="scoping" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_scopings" license="none" cat="utility" plugin="core" cpp-name="merge::scoping"></scripting-part></div><div class="operator" id="elastic strain principal 3" scripting_name="elastic_strain_principal_3"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain principal 3</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component elastic strains 3rd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_principal_3" license="none" cat="result" plugin="core" cpp-name="EPEL3"></scripting-part></div><div class="operator" id="cyclic analytic disp max" scripting_name="cyclic_analytic_usum_max"plugin="core"cat="result"><h1 class="op-des-h1">result: cyclic analytic disp max</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Compute the maximum of the total deformation that can be expected on 360 degrees"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="" types="scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="" types="scopings_container scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="field container with the base and duplicate sectors" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="default is true" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="cyclic_support" n="16" doc="" types="cyclic_support" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="FieldsContainer filled in" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><config-spec name="use_cache" default="true" doc="Some intermediate data is put in cache if this config is set to true. This option can reduce computation time after the first run." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="cyclic_analytic_usum_max" license="none" cat="result" plugin="core" cpp-name="cyclic_analytic_usum_max"></scripting-part></div><div class="operator" id="elastic strain eqv" scripting_name="elastic_strain_eqv"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain eqv</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal equivalent elastic strain by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_eqv" license="none" cat="result" plugin="core" cpp-name="EPEL_EQV"></scripting-part></div><div class="operator" id="electric flux density X" scripting_name="electric_flux_density_X"plugin="core"cat="result"><h1 class="op-des-h1">result: electric flux density X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Electric flux density X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_flux_density_X" license="none" cat="result" plugin="core" cpp-name="EFDX"></scripting-part></div><div class="operator" id="elastic strain intensity" scripting_name="elastic_strain_intensity"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain intensity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component elastic strains, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_intensity" license="none" cat="result" plugin="core" cpp-name="EPEL_intensity"></scripting-part></div><div class="operator" id="elastic strain max_shear" scripting_name="elastic_strain_max_shear"plugin="core"cat="result"><h1 class="op-des-h1">result: elastic strain max_shear</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component elastic strains, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elastic_strain_max_shear" license="none" cat="result" plugin="core" cpp-name="EPEL_max_shear"></scripting-part></div><div class="operator" id="turbulent dissipation rate (omega)" scripting_name="omega"plugin="core"cat="result"><h1 class="op-des-h1">result: turbulent dissipation rate (omega)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Turbulent Specific Dissipation Rate (omega) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="omega" license="none" cat="result" plugin="core" cpp-name="OME"></scripting-part></div><div class="operator" id="to elemental (fields container)" scripting_name="to_elemental_fc"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: to elemental (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Transforms Input fields into Elemental fields using an averaging process. The result is computed on a given element's scoping."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="1" doc="" types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="3" doc="" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="smoothen_values" n="7" doc="if it is set to true, Elemental Nodal fields are first averaged on nodes and then averaged on elements (default is false)." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="collapse_shell_layers" n="10" doc="If true, the data across different shell layers is averaged as well (default is false)." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merge_solid_shell" n="26" doc="For shell/solid mixed fields, group in the same field all solids and shells (false by default). If this pin is true and collapse_shell_layers is false, a shell_layer needs to be specified." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="0: Top, 1: Bottom, 2: BottomTop, 3: Mid, 4: BottomTopMid. If merge_solid_shell is true, this pin needs to be specified to a value that extracts only one layer (Top, Bottom or Mid)." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="to_elemental_fc" license="none" cat="averaging" plugin="core" cpp-name="to_elemental_fc"></scripting-part></div><div class="operator" id="plastic strain" scripting_name="plastic_strain"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain" license="none" cat="result" plugin="core" cpp-name="EPPL"></scripting-part></div><div class="operator" id="transpose" scripting_name="transpose"plugin="core"cat="scoping"><h1 class="op-des-h1">scoping: transpose</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Transposes the input scoping or scopings container (Elemental/Faces --> Nodal, or Nodal ---> Elemental/Faces), based on the input mesh region."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh_scoping" n="0" doc="Scoping or scopings container (the input type is the output type)" types="scoping scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="meshed_region" n="1" doc="" types="meshed_region meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="inclusive" n="2" doc="if inclusive == 1 then all the elements/faces adjacent to the nodes/faces ids in input are added, if inclusive == 0, only the elements/faces which have all their nodes/faces in the scoping are included" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="Output scoping location for meshes with nodes, faces and elements. By default, elemental and faces scopings transpose to nodal, and nodal scopings transpose to elemental." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="mesh_scoping" n="0" doc="Scoping or scopings container (the input type is the output type)" types="scoping scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="transpose" license="none" cat="scoping" plugin="core" cpp-name="transpose_scoping"></scripting-part></div><div class="operator" id="mass fraction" scripting_name="mass_fraction"plugin="core"cat="result"><h1 class="op-des-h1">result: mass fraction</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Mass Fraction by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="mass_fraction" license="none" cat="result" plugin="core" cpp-name="Y"></scripting-part></div><div class="operator" id="plastic strain X" scripting_name="plastic_strain_X"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_X" license="none" cat="result" plugin="core" cpp-name="EPPLX"></scripting-part></div><div class="operator" id="coordinates (LSDyna)" scripting_name="coordinates"plugin="core"cat="result"><h1 class="op-des-h1">result: coordinates (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Coordinates (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="coordinates" license="none" cat="result" plugin="core" cpp-name="X"></scripting-part></div><div class="operator" id="plastic strain Y" scripting_name="plastic_strain_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains YY normal component (11 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_Y" license="none" cat="result" plugin="core" cpp-name="EPPLY"></scripting-part></div><div class="operator" id="band pass (fields container)" scripting_name="field_band_pass_fc"plugin="core"cat="filter"><h1 class="op-des-h1">filter: band pass (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="The band pass filter returns all the values above (but not equal to) the minimum threshold value and below (but not equal to) the maximum threshold value in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="field or fields container with only one field is expected" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="min_threshold" n="1" doc="A minimum threshold scalar or a field containing one value is expected." types="double field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="max_threshold" n="2" doc="A maximum threshold scalar or a field containing one value is expected." types="double field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="field_band_pass_fc" license="any_dpf_supported_increments" cat="filter" plugin="core" cpp-name="core::field::band_pass_fc"></scripting-part></div><div class="operator" id="to polar coordinates" scripting_name="to_polar_coordinates"plugin="core"cat="geo"><h1 class="op-des-h1">geo: to polar coordinates</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Finds r, theta (rad), and z coordinates of a coordinates (nodal) field in a cartesian coordinates system where the input coordinate system defines the rotation axis and the origin."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="field or fields container with only one field is expected" types="field fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="coordinate_system" n="1" doc="3-3 rotation matrix and origin coordinates must be set here to define a coordinate system. By default, the rotation axis is the z axis and the origin is [0,0,0]." types="field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="to_polar_coordinates" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="polar_coordinates"></scripting-part></div><div class="operator" id="fft evaluation" scripting_name="fft_eval"plugin="core"cat="math"><h1 class="op-des-h1">math: fft evaluation</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Evaluate the fast fourier transforms at a given set of fields."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field_t" n="0" doc="field of values to evaluate" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="time_scoping" n="1" doc="if specified only the results at these set ids are used" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="offset" n="2" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="fft_eval" license="any_dpf_supported_increments" cat="math" plugin="core" cpp-name="fft_eval"></scripting-part></div><div class="operator" id="global total energy (LSDyna)" scripting_name="global_total_energy"plugin="core"cat="result"><h1 class="op-des-h1">result: global total energy (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Global Total Energy (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="global_total_energy" license="none" cat="result" plugin="core" cpp-name="GLOB_ENG_TE"></scripting-part></div><div class="operator" id="plastic strain Z" scripting_name="plastic_strain_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains ZZ normal component (22 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_Z" license="none" cat="result" plugin="core" cpp-name="EPPLZ"></scripting-part></div><div class="operator" id="merge materials" scripting_name="merge_materials"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge materials</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of materials into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="materials" n="0" doc="A vector of materials to merge or materials from pin 0 to ..." types="vector<shared_ptr<materials>> materials" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_materials" n="0" doc="" types="materials" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_materials" license="none" cat="utility" plugin="core" cpp-name="merge::materials"></scripting-part></div><div class="operator" id="vtk export" scripting_name="vtk_export"plugin="vtk"cat="serialization"><h1 class="op-des-h1">serialization: vtk export</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Write the input field and fields container into a given vtk path"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="export_type" n="-1" doc="Either export volume elements in the mesh with their fields with value 0 or faces elements in the mesh with their fields with value 1 (default is 0)" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="file_path" n="0" doc="path with vtk extension were the export occurs" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="1" doc="necessary if the first field or fields container don't have a mesh in their support" types="abstract_meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields" n="2" doc="fields exported" types="fields_container field" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="vtk_export" license="none" cat="serialization" plugin="vtk" cpp-name="vtk_export"></scripting-part></div><div class="operator" id="dynamic viscosity" scripting_name="dynamic_viscosity"plugin="core"cat="result"><h1 class="op-des-h1">result: dynamic viscosity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Dynamic Viscosity by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="dynamic_viscosity" license="none" cat="result" plugin="core" cpp-name="MU"></scripting-part></div><div class="operator" id="plastic strain XY" scripting_name="plastic_strain_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_XY" license="none" cat="result" plugin="core" cpp-name="EPPLXY"></scripting-part></div><div class="operator" id="hydrostatic pressure" scripting_name="hydrostatic_pressure"plugin="core"cat="result"><h1 class="op-des-h1">result: hydrostatic pressure</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal hydrostatic pressure by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="hydrostatic_pressure" license="none" cat="result" plugin="core" cpp-name="ENL_HPRES"></scripting-part></div><div class="operator" id="compute stress von mises" scripting_name="compute_stress_von_mises"plugin="live post"cat="result"><h1 class="op-des-h1">result: compute stress von mises</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the stress from an elastic strain field. compute_total_strain limitations are applicable for stress computationGet the Von Mises equivalent stress."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scoping" n="1" doc="The element scoping on which the result is computed." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="Needed to get mesh and material ids. Optional if a data_sources have been connected." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Needed to get mesh and material ids. Optional if a streams_container have been connected." types="data_sources" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="Average the Elemental Nodal result to the requested location." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="strain" n="10" doc="Field/or fields container containing only the elastic strain field (element nodal)." types="fields_container field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="The computed result fields container (elemental nodal)." types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="compute_stress_von_mises" license="none" cat="result" plugin="live post" cpp-name="compute_stress_von_mises"></scripting-part></div><div class="operator" id="low pass (scoping)" scripting_name="scoping_low_pass"plugin="core"cat="filter"><h1 class="op-des-h1">filter: low pass (scoping)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="The low pass filter returns all the values below (but not equal to) the threshold value in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="field or fields container with only one field is expected" types="field fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="threshold" n="1" doc="a threshold scalar or a field containing one value is expected" types="double field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="both" n="2" doc="The default is false. If set to true, the complement of the filtered fields container is returned on output pin 1." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="scoping" n="0" doc="" types="scoping" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="scoping_low_pass" license="any_dpf_supported_increments" cat="filter" plugin="core" cpp-name="core::scoping::low_pass"></scripting-part></div><div class="operator" id="iso surfaces" scripting_name="iso_surfaces"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: iso surfaces</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Extract multiple iso-contours from mesh_cut operator and set it into a meshes container. If pin 1 is provided, "num_surfaces" iso-contours will be computed, ranging from "min_value" to "max_value" linearly. If pin 4 is provided, the iso-values are the one set by the user. The iso-values are stored into a FieldsContainer."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="Field containing the values for the iso-surface computation. The mesh can be retrieved from this field's support or through pin 2." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="num_surfaces" n="1" doc="If provided, iso_values are linearly computed between the min and the max of the field of results. If not, iso_values must be provided by the user through pin 4" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="2" doc="Mesh to compute the iso-surface from. Used when not given through the support of the field in pin 0." types="meshed_region" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="slice_surfaces" n="3" doc="True: slicing will also take into account shell and skin elements. False: slicing will ignore shell and skin elements. The default is true." types="bool" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="vector_iso_values" n="4" doc="If provided, user defined iso_values to compute. If not provided, iso_values are linearly compute between the min and the max of the field of results." types="vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="meshes" n="0" doc="" types="meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="1" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="iso_surfaces" license="none" cat="mesh" plugin="core" cpp-name="iso_surfaces"></scripting-part></div><div class="operator" id="plastic strain YZ" scripting_name="plastic_strain_YZ"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain YZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains YZ shear component (12 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_YZ" license="none" cat="result" plugin="core" cpp-name="EPPLYZ"></scripting-part></div><div class="operator" id="plastic strain XZ" scripting_name="plastic_strain_XZ"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain XZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains XZ shear component (02 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_XZ" license="none" cat="result" plugin="core" cpp-name="EPPLXZ"></scripting-part></div><div class="operator" id="workflow energy per harmonic" scripting_name="workflow_energy_per_harmonic"plugin="mapdl"cat="result"><h1 class="op-des-h1">result: workflow energy per harmonic</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Calculates the cumulated energy per harmonic in a multistage multiharmonic model."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="Master scoping. All harmonics will be intersected with this scoping." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="energy_type" n="2" doc="Type of energy to be processed: (0: Strain + Kinetic energy (default), 1: Strain energy, 2: Kinetic energy)" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="harmonic_energy" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="harmonic_energy_percentage" n="1" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="workflow_energy_per_harmonic" license="any_dpf_supported_increments" cat="result" plugin="mapdl" cpp-name="workflow_energy_per_harmonic"></scripting-part></div><div class="operator" id="plastic strain principal 3" scripting_name="plastic_strain_principal_3"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain principal 3</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component plastic strains 3rd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_principal_3" license="none" cat="result" plugin="core" cpp-name="EPPL3"></scripting-part></div><div class="operator" id="plastic strain intensity" scripting_name="plastic_strain_intensity"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain intensity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component plastic strains, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_intensity" license="none" cat="result" plugin="core" cpp-name="EPPL_intensity"></scripting-part></div><div class="operator" id="plastic strain max_shear" scripting_name="plastic_strain_max_shear"plugin="core"cat="result"><h1 class="op-des-h1">result: plastic strain max_shear</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Reads/computes element nodal component plastic strains, average it on nodes (by default) and computes its invariants."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="plastic_strain_max_shear" license="none" cat="result" plugin="core" cpp-name="EPPL_max_shear"></scripting-part></div><div class="operator" id="low pass (timefreq)" scripting_name="timefreq_low_pass"plugin="core"cat="filter"><h1 class="op-des-h1">filter: low pass (timefreq)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="The low pass filter returns all the values below (but not equal to) the threshold value in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_freq_support" n="0" doc="" types="time_freq_support" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="threshold" n="1" doc="a threshold scalar or a field containing one value is expected" types="double field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="both" n="2" doc="The default is false. If set to true, the complement of the filtered fields container is returned on output pin 1." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="time_freq_support" n="0" doc="" types="time_freq_support" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="scoping" n="1" doc="" types="scoping" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="timefreq_low_pass" license="any_dpf_supported_increments" cat="filter" plugin="core" cpp-name="core::timefreq::low_pass"></scripting-part></div><div class="operator" id="band pass (field)" scripting_name="field_band_pass"plugin="core"cat="filter"><h1 class="op-des-h1">filter: band pass (field)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="The band pass filter returns all the values above (but not equal to) the minimum threshold value and below (but not equal to) the maximum threshold value in input."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="field" n="0" doc="field or fields container with only one field is expected" types="field fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="min_threshold" n="1" doc="A minimum threshold scalar or a field containing one value is expected." types="double field" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="max_threshold" n="2" doc="A maximum threshold scalar or a field containing one value is expected." types="double field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="field_band_pass" license="any_dpf_supported_increments" cat="filter" plugin="core" cpp-name="core::field::band_pass"></scripting-part></div><div class="operator" id="modal damping ratio" scripting_name="modal_damping_ratio"plugin="core"cat="math"><h1 class="op-des-h1">math: modal damping ratio</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes damping ratio for each mode shape as X_i = const + ratio_i + m_coefficient / (2*omega_i) + k_coefficient * omega_i/2."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="natural_freq" n="0" doc="input vector expects natural frequencies." types="vector<double>" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="const_ratio" n="1" doc="constant modal damping ratio" types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="ratio_by_modes" n="2" doc="modal damping ratio for each mode shape" types="vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="m_coefficient" n="3" doc="global mass matrix multiplier" types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="k_coefficient" n="4" doc="global stiffness matrix multiplier" types="double" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="field of modal damping ratio." types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="modal_damping_ratio" license="any_dpf_supported_increments" cat="math" plugin="core" cpp-name="modal_damping_ratio"></scripting-part></div><div class="operator" id="thermal strain X" scripting_name="thermal_strain_X"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains XX normal component (00 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_X" license="none" cat="result" plugin="core" cpp-name="ETHX"></scripting-part></div><div class="operator" id="thermal strain Y" scripting_name="thermal_strain_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains YY normal component (11 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_Y" license="none" cat="result" plugin="core" cpp-name="ETHY"></scripting-part></div><div class="operator" id="equivalent radiated power" scripting_name="equivalent_radiated_power"plugin="core"cat="result"><h1 class="op-des-h1">result: equivalent radiated power</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Compute the Equivalent Radiated Power (ERP)"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="the input field container expects displacements fields" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="1" doc="the mesh region in this pin has to be boundary or skin mesh" types="abstract_meshed_region meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="time_scoping" n="2" doc="load step number (if it's specified, the ERP is computed only on the substeps of this step) or time scoping" types="int32 vector<int32> scoping" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mass_density" n="3" doc="mass density (if it's not specified, default value of the air is applied)." types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="speed_of_sound" n="4" doc="speed of sound (if it's not specified, default value of the speed of sound in the air is applied)." types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="erp_type" n="5" doc="if this pin is set to 0, the classical ERP is computed, 1 the corrected ERP is computed (a mesh of one face has to be given in the pin 1) and 2 the enhanced ERP is computed. Default is 0." types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="boolean" n="6" doc="if this pin is set to true, the ERP level in dB is computed" types="bool" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="factor" n="7" doc="erp reference value. Default is 1E-12" types="double" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="equivalent_radiated_power" license="any_dpf_supported_increments" cat="result" plugin="core" cpp-name="ERP"></scripting-part></div><div class="operator" id="thermal strain Z" scripting_name="thermal_strain_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains ZZ normal component (22 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_Z" license="none" cat="result" plugin="core" cpp-name="ETHZ"></scripting-part></div><div class="operator" id="merge scopings containers" scripting_name="merge_scopings_containers"plugin="core"cat="utility"><h1 class="op-des-h1">utility: merge scopings containers</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Assembles a set of scopings containers into a unique one."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scopings_containers" n="0" doc="A vector of scopings containers to merge or scopings containers from pin 0 to ..." types="vector<shared_ptr<scopings_container>> scopings_container" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="merged_scopings_container" n="0" doc="" types="scopings_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="merge_scopings_containers" license="none" cat="utility" plugin="core" cpp-name="merge::scopings_container"></scripting-part></div><div class="operator" id="accumulate over label" scripting_name="accumulate_over_label_fc"plugin="core"cat="math"><h1 class="op-des-h1">math: accumulate over label</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Compute the component-wise sum over all the fields that have the same ID as the label set as input in the fields container. This computation can be incremental. If the input fields container is connected and the operator is run multiple times, the output field will be on all the connected inputs."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="label" n="1" doc="Label of the fields container where it should operate." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="field" n="0" doc="" types="field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="incremental" default="true" doc="This operator can be run several times with different inputs so that the output will take all the inputs of the different runs into account. It can be used to save memory. For example, a large time scoping can be split in smaller ranges of time to compute the result range by range." types="bool" ></config-spec><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="accumulate_over_label_fc" license="none" cat="math" plugin="core" cpp-name="accumulate_over_label_fc"></scripting-part></div><div class="operator" id="thermal strain XY" scripting_name="thermal_strain_XY"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain XY</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains XY shear component (01 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_XY" license="none" cat="result" plugin="core" cpp-name="ETHXY"></scripting-part></div><div class="operator" id="thermal strain YZ" scripting_name="thermal_strain_YZ"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain YZ</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains YZ shear component (12 component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_YZ" license="none" cat="result" plugin="core" cpp-name="ETHYZ"></scripting-part></div><div class="operator" id="thermal strain principal 1" scripting_name="thermal_strain_principal_1"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain principal 1</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains 1st principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_principal_1" license="none" cat="result" plugin="core" cpp-name="ETH1"></scripting-part></div><div class="operator" id="same anys?" scripting_name="identical_anys"plugin="core"cat="logic"><h1 class="op-des-h1">logic: same anys?</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Takes two Any objects and compares them.Supported types: Field, FieldsContainer, Mesh, MeshesContainer, PropertyField, PropertyFieldsContainer, Scoping, ScopingsContainer, StringField, standard types (double, int, string, vector of int, doubles, string). Note: all inputs related to fields, mesh, and so on are passed to each property check."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="anyA" n="0" doc="" types="any" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="anyB" n="1" doc="" types="any" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="double_value" n="2" doc="Double positive small value. Smallest value considered during the comparison step. All the absolute values in the field less than this value are considered null, (default value: 1.0e-14)." types="double" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="double_tolerance" n="3" doc="Double relative tolerance. Maximum tolerance gap between two compared values. Values within relative tolerance are considered identical. Formula is (v1-v2)/v2 < relativeTol. Default is 0.001." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="compare_auxiliary" n="4" doc="For meshes and meshescontainer: compare auxiliary data (i.e property fields, scopings...). Default value is 'false'." types="bool" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="included" n="0" doc="bool (true if belongs...)" types="bool" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="message" n="1" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="identical_anys" license="none" cat="logic" plugin="core" cpp-name="compare::any"></scripting-part></div><div class="operator" id="thermal strain principal 2" scripting_name="thermal_strain_principal_2"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain principal 2</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains 2nd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_principal_2" license="none" cat="result" plugin="core" cpp-name="ETH2"></scripting-part></div><div class="operator" id="thermal strain principal 3" scripting_name="thermal_strain_principal_3"plugin="core"cat="result"><h1 class="op-des-h1">result: thermal strain principal 3</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal component thermal strains 3rd principal component by calling the readers defined by the datasources and computing its eigen values. The off-diagonal strains are first converted from Voigt notation to the standard strain values."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="thermal_strain_principal_3" license="none" cat="result" plugin="core" cpp-name="ETH3"></scripting-part></div><div class="operator" id="serializer" scripting_name="serializer"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: serializer</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Take any input and serialize them in a file."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="stream_type" n="-1" doc="0 for ASCII (default), and 1 for binary" types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="file_path" n="0" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="any_input" n="1" doc="any input" types="any" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="file_path" n="0" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="serializer" license="none" cat="serialization" plugin="core" cpp-name="serializer"></scripting-part></div><div class="operator" id="wall shear stress" scripting_name="wall_shear_stress"plugin="core"cat="result"><h1 class="op-des-h1">result: wall shear stress</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Wall Shear Stress by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="wall_shear_stress" license="none" cat="result" plugin="core" cpp-name="TAU"></scripting-part></div><div class="operator" id="velocity" scripting_name="velocity"plugin="core"cat="result"><h1 class="op-des-h1">result: velocity</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal velocities by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="velocity" license="none" cat="result" plugin="core" cpp-name="V"></scripting-part></div><div class="operator" id="reaction force" scripting_name="reaction_force"plugin="core"cat="result"><h1 class="op-des-h1">result: reaction force</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal reaction forces by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="reaction_force" license="none" cat="result" plugin="core" cpp-name="RF"></scripting-part></div><div class="operator" id="velocity X" scripting_name="velocity_X"plugin="core"cat="result"><h1 class="op-des-h1">result: velocity X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal velocities X component of the vector (1st component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="velocity_X" license="none" cat="result" plugin="core" cpp-name="VX"></scripting-part></div><div class="operator" id="reaction force X" scripting_name="reaction_force_X"plugin="core"cat="result"><h1 class="op-des-h1">result: reaction force X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal reaction forces X component of the vector (1st component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="reaction_force_X" license="none" cat="result" plugin="core" cpp-name="RFX"></scripting-part></div><div class="operator" id="cartesian to spherical coordinates (fields container)" scripting_name="cartesian_to_spherical_fc"plugin="core"cat="geo"><h1 class="op-des-h1">geo: cartesian to spherical coordinates (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Converts 3D field from cartesian coordinates to spherical coordinates."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="cartesian_to_spherical_fc" license="any_dpf_supported_increments" cat="geo" plugin="core" cpp-name="cartesian_to_spherical_fc"></scripting-part></div><div class="operator" id="global external work (LSDyna)" scripting_name="global_external_work"plugin="core"cat="result"><h1 class="op-des-h1">result: global external work (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Global External Work (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="global_external_work" license="none" cat="result" plugin="core" cpp-name="GLOB_EW"></scripting-part></div><div class="operator" id="acceleration" scripting_name="acceleration"plugin="core"cat="result"><h1 class="op-des-h1">result: acceleration</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal accelerations by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="acceleration" license="none" cat="result" plugin="core" cpp-name="A"></scripting-part></div><div class="operator" id="element centroids" scripting_name="element_centroids"plugin="core"cat="result"><h1 class="op-des-h1">result: element centroids</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute coordinate of the elemental centroids by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_centroids" license="none" cat="result" plugin="core" cpp-name="centroids"></scripting-part></div><div class="operator" id="acceleration Z" scripting_name="acceleration_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: acceleration Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal accelerations Z component of the vector (3rd component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="acceleration_Z" license="none" cat="result" plugin="core" cpp-name="AZ"></scripting-part></div><div class="operator" id="rescope (fields container)" scripting_name="rescope_fc"plugin="core"cat="scoping"><h1 class="op-des-h1">scoping: rescope (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Rescopes a field on the given scoping. If an ID does not exist in the original field, the default value (in 2) is used when defined."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="" types="scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="default_value" n="2" doc="If pin 2 is used, the IDs not found in the field are added with this default value." types="double vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="rescope_fc" license="none" cat="scoping" plugin="core" cpp-name="Rescope_fc"></scripting-part></div><div class="operator" id="workflow to workflow_topology" scripting_name="workflow_to_workflow_topology"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: workflow to workflow_topology</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Creates a GenericDataContainer based on WorkflowTopology structure from a Workflow object, allowing to access its operators, operator connections, data connections, and exposed pins."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="workflow" n="0" doc="" types="workflow" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="workflow_topology" n="0" doc="" types="generic_data_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="workflow_to_workflow_topology" license="none" cat="serialization" plugin="core" cpp-name="workflow_to_workflow_topology"></scripting-part></div><div class="operator" id="displacement" scripting_name="displacement"plugin="core"cat="result"><h1 class="op-des-h1">result: displacement</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal displacements by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="displacement" license="none" cat="result" plugin="core" cpp-name="U"></scripting-part></div><div class="operator" id="electric field Z" scripting_name="electric_field_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: electric field Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute electric field Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_field_Z" license="none" cat="result" plugin="core" cpp-name="EFZ"></scripting-part></div><div class="operator" id="displacement X" scripting_name="displacement_X"plugin="core"cat="result"><h1 class="op-des-h1">result: displacement X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal displacements X component of the vector (1st component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="displacement_X" license="none" cat="result" plugin="core" cpp-name="UX"></scripting-part></div><div class="operator" id="force_summation" scripting_name="force_summation"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: force_summation</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the sum of elemental forces contribution on a set of nodes in Global Coordinate System. Equivalent to MAPDL FSUM & NFORCE commands. Supports Static, Transient, Modal & Harmonic analysis for thermal and structural degrees of freedom."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="default = all time steps" types="scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="nodal_scoping" n="1" doc="Nodal Scoping. Set of nodes in which elemental contribution forces will be accumulated (default = all nodes)" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="elemental_scoping" n="2" doc="Elemental Scoping. Set of elements contributing to the force calcuation. (default = all elements)" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="Streams container. Optional if using data sources." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Data sources. Optional if using a streams container." types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="force_type" n="5" doc="Type of force to be processed (0 - default: Total forces (static, damping, and inertia)., 1: Static forces, 2: Damping forces, 3: Inertia forces)" types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="spoint" n="6" doc="Coordinate field of a point for moment summations. Defaults to (0,0,0)." types="field" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="force_accumulation" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="moment_accumulation" n="1" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="heat_accumulation" n="2" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="forces_on_nodes" n="10" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="moments_on_nodes" n="11" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="heats_on_nodes" n="12" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="force_summation" license="any_dpf_supported_increments" cat="averaging" plugin="core" cpp-name="force_summation"></scripting-part></div><div class="operator" id="displacement Y" scripting_name="displacement_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: displacement Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal displacements Y component of the vector (2nd component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="displacement_Y" license="none" cat="result" plugin="core" cpp-name="UY"></scripting-part></div><div class="operator" id="electric field X" scripting_name="electric_field_X"plugin="core"cat="result"><h1 class="op-des-h1">result: electric field X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute electric field X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_field_X" license="none" cat="result" plugin="core" cpp-name="EFX"></scripting-part></div><div class="operator" id="displacement Z" scripting_name="displacement_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: displacement Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal displacements Z component of the vector (3rd component) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="displacement_Z" license="none" cat="result" plugin="core" cpp-name="UZ"></scripting-part></div><div class="operator" id="heat flux X" scripting_name="heat_flux_X"plugin="core"cat="result"><h1 class="op-des-h1">result: heat flux X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute heat flux X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="heat_flux_X" license="none" cat="result" plugin="core" cpp-name="TFX"></scripting-part></div><div class="operator" id="heat flux Y" scripting_name="heat_flux_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: heat flux Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute heat flux Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="heat_flux_Y" license="none" cat="result" plugin="core" cpp-name="TFY"></scripting-part></div><div class="operator" id="electric field" scripting_name="electric_field"plugin="core"cat="result"><h1 class="op-des-h1">result: electric field</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute electric field by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_field" license="none" cat="result" plugin="core" cpp-name="EF"></scripting-part></div><div class="operator" id="total contact moment" scripting_name="total_contact_moment"plugin="core"cat="result"><h1 class="op-des-h1">result: total contact moment</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute total contact moment by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="total_contact_moment" license="none" cat="result" plugin="core" cpp-name="CFTTOT"></scripting-part></div><div class="operator" id="heat flux Z" scripting_name="heat_flux_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: heat flux Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute heat flux Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="heat_flux_Z" license="none" cat="result" plugin="core" cpp-name="TFZ"></scripting-part></div><div class="operator" id="serialize to hdf5" scripting_name="serialize_to_hdf5"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: serialize to hdf5</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="This operator is deprecated: use 'hdf5::h5dpf::make_result_file' instead. Serialize the inputs in an hdf5 format."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="file_path" n="0" doc="output file path with .h5 extension" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="export_floats" n="1" doc="converts double to float to reduce file size (default is true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="export_flat_vectors" n="2" doc="if true, vectors and matrices data are exported flat (x1,y1,z1,x2,y2,z2..) (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data" n="3" doc="only the data set explicitly to export is exported" types="" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="serialize_to_hdf5" license="none" cat="serialization" plugin="core" cpp-name="serialize_to_hdf5"></scripting-part></div><div class="operator" id="element orientations" scripting_name="element_orientations"plugin="core"cat="result"><h1 class="op-des-h1">result: element orientations</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element euler angles by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_orientations" license="none" cat="result" plugin="core" cpp-name="EUL"></scripting-part></div><div class="operator" id="element orientations Y" scripting_name="element_orientations_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: element orientations Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element euler angles Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_orientations_Y" license="none" cat="result" plugin="core" cpp-name="EULY"></scripting-part></div><div class="operator" id="magnetic field Z" scripting_name="magnetic_field_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic field Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Field Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_field_Z" license="none" cat="result" plugin="core" cpp-name="MFZ"></scripting-part></div><div class="operator" id="elemental mean (fields container)" scripting_name="elemental_mean_fc"plugin="core"cat="averaging"><h1 class="op-des-h1">averaging: elemental mean (fields container)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the average of a multi-entity container of fields, (ElementalNodal -> Elemental), (NodalElemental -> Nodal). If the input fields are mixed shell/solid and collapseShellLayers is false, then the fields could be split by element shape and the output fields container would have an elshape label depending on the e_shell_layer and merge_solid_shell inputs (if e_shell_layer is not specified, the fields are split; if it is specified, the fields can be split based on merge_solid_shell).If collapseShellLayers is true, all available shell layers are collapsed and shells and solid fields are always merged."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="collapse_shell_layers" n="1" doc="If true, the data across different shell layers is averaged as well (default is false)." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="force_averaging" n="2" doc="If true you average, if false you just sum." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="scoping" n="3" doc="Average only on these elements. If it is a scoping container, the label must correspond to the one of the fields container." types="scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="abstract_meshed_region" n="4" doc="The mesh region in this pin is used to perform the averaging. It is used if there is no fields support." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="merge_solid_shell" n="26" doc="For shell/solid mixed fields, group in the same field all solids and shells (false by default). This pin only has an effect when collapse_shell_layers is false and a value for e_shell_layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="e_shell_layer" n="27" doc="0: Top, 1: Bottom, 2: BottomTop, 3: Mid, 4: BottomTopMid. This pin only has an effect when collapse_shell_layers is false." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="elemental_mean_fc" license="none" cat="averaging" plugin="core" cpp-name="entity_average_fc"></scripting-part></div><div class="operator" id="magnetic field Y" scripting_name="magnetic_field_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic field Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Field Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_field_Y" license="none" cat="result" plugin="core" cpp-name="MFY"></scripting-part></div><div class="operator" id="split mesh wrt property" scripting_name="split_mesh"plugin="core"cat="mesh"><h1 class="op-des-h1">mesh: split mesh wrt property</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Split the input mesh into several meshes based on a given property (material property be default)"></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="mesh_scoping" n="1" doc="Scoping" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="" types="abstract_meshed_region" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="property" n="13" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="meshes" n="0" doc="" types="meshes_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="split_mesh" license="any_dpf_supported_increments" cat="mesh" plugin="core" cpp-name="split_mesh"></scripting-part></div><div class="operator" id="element orientations Z" scripting_name="element_orientations_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: element orientations Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element euler angles Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_orientations_Z" license="none" cat="result" plugin="core" cpp-name="EULZ"></scripting-part></div><div class="operator" id="temperature gradient" scripting_name="temperature_grad"plugin="core"cat="result"><h1 class="op-des-h1">result: temperature gradient</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Temperature Gradient by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="temperature_grad" license="none" cat="result" plugin="core" cpp-name="TG"></scripting-part></div><div class="operator" id="cgns result provider" scripting_name="cgns_result_provider"plugin="cgns"cat="result"><h1 class="op-des-h1">result: cgns result provider</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute names result from result streams."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output" types="scoping vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The scoping's location indicates whether nodes or elements are asked. Using scopings container enables to split the result fields container in domains" types="scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="result_name" n="17" doc="name of the result to read. By default the name of the operator is taken." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="Optional zone name/Id of the mesh." types="scoping vector<int32> int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields" n="0" doc="Results" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="cgns_result_provider" license="none" cat="result" plugin="cgns" cpp-name="cgns::cgns::result_provider"></scripting-part></div><div class="operator" id="temperature gradient X" scripting_name="temperature_grad_X"plugin="core"cat="result"><h1 class="op-des-h1">result: temperature gradient X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Temperature Gradient X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="temperature_grad_X" license="none" cat="result" plugin="core" cpp-name="TGX"></scripting-part></div><div class="operator" id="entropy" scripting_name="entropy"plugin="core"cat="result"><h1 class="op-des-h1">result: entropy</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Entropy by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="entropy" license="none" cat="result" plugin="core" cpp-name="S_S"></scripting-part></div><div class="operator" id="volume fraction" scripting_name="volume_fraction"plugin="core"cat="result"><h1 class="op-des-h1">result: volume fraction</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Volume Fraction by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="region_scoping" n="25" doc="region id (integer) or vector of region ids (vector) or region scoping (scoping) of the model (region corresponds to zone for Fluid results or part for LSDyna results)." types="scoping int32 vector<int32>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="qualifiers" n="1000" doc="(for Fluid results only) LabelSpace with combination of zone, phases or species ids" types="label_space" optional="true"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="volume_fraction" license="none" cat="result" plugin="core" cpp-name="VOF"></scripting-part></div><div class="operator" id="temperature gradient Y" scripting_name="temperature_grad_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: temperature gradient Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Temperature Gradient Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="temperature_grad_Y" license="none" cat="result" plugin="core" cpp-name="TGY"></scripting-part></div><div class="operator" id="temperature gradient Z" scripting_name="temperature_grad_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: temperature gradient Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Temperature Gradient Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="temperature_grad_Z" license="none" cat="result" plugin="core" cpp-name="TGZ"></scripting-part></div><div class="operator" id="elemental summable miscellaneous data" scripting_name="smisc"plugin="core"cat="result"><h1 class="op-des-h1">result: elemental summable miscellaneous data</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute elemental summable miscellaneous data by calling the readers defined by the datasources. Modal superposition (on demand expansion) and cyclic cxpansion procedures are supported, however, you should verify that the linear combination is applicable for the associated element according to the MAPDL documentation description of each item."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="item_index" n="10" doc="Index of requested item." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="num_components" n="11" doc="Number of components for the requested item." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="smisc" license="none" cat="result" plugin="core" cpp-name="SMISC"></scripting-part></div><div class="operator" id="magnetic field" scripting_name="magnetic_field"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic field</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Field by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_field" license="none" cat="result" plugin="core" cpp-name="MF"></scripting-part></div><div class="operator" id="compute stress Z" scripting_name="compute_stress_Z"plugin="live post"cat="result"><h1 class="op-des-h1">result: compute stress Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the stress from an elastic strain field. compute_total_strain limitations are applicable for stress computation Get the ZZ normal component (22 component)."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="scoping" n="1" doc="The element scoping on which the result is computed." types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="streams_container" n="3" doc="Needed to get mesh and material ids. Optional if a data_sources have been connected." types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="Needed to get mesh and material ids. Optional if a streams_container have been connected." types="data_sources" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="Average the Elemental Nodal result to the requested location." types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="strain" n="10" doc="Field/or fields container containing only the elastic strain field (element nodal)." types="fields_container field" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="The computed result fields container (elemental nodal)." types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="compute_stress_Z" license="none" cat="result" plugin="live post" cpp-name="compute_stress_Z"></scripting-part></div><div class="operator" id="part eroded kinetic energy (LSDyna)" scripting_name="part_eroded_kinetic_energy"plugin="core"cat="result"><h1 class="op-des-h1">result: part eroded kinetic energy (LSDyna)</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read Part Eroded Kinetic Energy (LSDyna) by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="entity_scoping" n="6" doc="entity (part for matsum, interface for rcforc) where the result will be scoped" types="scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="unit_system" n="50" doc="Unit System ID (int), semicolon-separated list of base unit strings (str) or UnitSystem instance" types="int32 string class dataProcessing::unit::CUnitSystem" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="part_eroded_kinetic_energy" license="none" cat="result" plugin="core" cpp-name="M_ERKE"></scripting-part></div><div class="operator" id="magnetic field X" scripting_name="magnetic_field_X"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic field X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Field X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_field_X" license="none" cat="result" plugin="core" cpp-name="MFX"></scripting-part></div><div class="operator" id="string deserializer" scripting_name="string_deserializer"plugin="core"cat="serialization"><h1 class="op-des-h1">serialization: string deserializer</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Takes a string generated by the serializer and deserializes it into DPF's entities."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="stream_type" n="-1" doc="0 for string (default), and 1 for binary" types="int32" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="serialized_string" n="0" doc="" types="string" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="any_output" n="1" doc="number and types of outputs corresponding of the inputs used in the serialization" types="any" optional="false"ellipsis="true"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="string_deserializer" license="none" cat="serialization" plugin="core" cpp-name="string_deserializer"></scripting-part></div><div class="operator" id="magnetic flux density" scripting_name="magnetic_flux_density"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic flux density</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Flux Density by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_flux_density" license="none" cat="result" plugin="core" cpp-name="MFD"></scripting-part></div><div class="operator" id="magnetic flux density X" scripting_name="magnetic_flux_density_X"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic flux density X</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Flux Density X component of the vector (1st component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_flux_density_X" license="none" cat="result" plugin="core" cpp-name="MFDX"></scripting-part></div><div class="operator" id="magnetic flux density Y" scripting_name="magnetic_flux_density_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic flux density Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Flux Density Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_flux_density_Y" license="none" cat="result" plugin="core" cpp-name="MFDY"></scripting-part></div><div class="operator" id="nodal force" scripting_name="nodal_force"plugin="core"cat="result"><h1 class="op-des-h1">result: nodal force</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute nodal forces by calling the readers defined by the datasources."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="nodal_force" license="none" cat="result" plugin="core" cpp-name="F"></scripting-part></div><div class="operator" id="magnetic flux density Z" scripting_name="magnetic_flux_density_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: magnetic flux density Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Magnetic Flux Density Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="magnetic_flux_density_Z" license="none" cat="result" plugin="core" cpp-name="MFDZ"></scripting-part></div><div class="operator" id="electric field Y" scripting_name="electric_field_Y"plugin="core"cat="result"><h1 class="op-des-h1">result: electric field Y</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute electric field Y component of the vector (2nd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_field_Y" license="none" cat="result" plugin="core" cpp-name="EFY"></scripting-part></div><div class="operator" id="electric flux density Z" scripting_name="electric_flux_density_Z"plugin="core"cat="result"><h1 class="op-des-h1">result: electric flux density Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute Electric flux density Z component of the vector (3rd component) by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="FieldsContainer already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="prevents from reading the mesh in the result files" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location, default is Nodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="electric_flux_density_Z" license="none" cat="result" plugin="core" cpp-name="EFDZ"></scripting-part></div><div class="operator" id="element nodal forces" scripting_name="element_nodal_forces"plugin="core"cat="result"><h1 class="op-des-h1">result: element nodal forces</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Read/compute element nodal forces by calling the readers defined by the datasources. Regarding the requested location and the input mesh scoping, the result location can be Nodal/ElementalNodal/Elemental."></op-description><h2 class="op-des-h2">Inputs</h2><pin-def name="time_scoping" n="0" doc="time/freq values (use doubles or field), time/freq set ids (use ints or scoping) or time/freq step ids (use scoping with TimeFreq_steps location) required in output. To specify time/freq values at specific load steps, put a Field (and not a list) in input with a scoping located on 'TimeFreq_steps'. Linear time freq intrapolation is performed if the values are not in the result files and the data at the max time or freq is taken when time/freqs are higher than available time/freqs in result files." types="scoping int32 vector<int32> double field vector<double>" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh_scoping" n="1" doc="nodes or elements scoping required in output. The output fields will be scoped on these node or element IDs. To figure out the ordering of the fields data, look at their scoping IDs as they might not be ordered as the input scoping was. The scoping's location indicates whether nodes or elements are asked for. Using scopings container allows you to split the result fields container into domains" types="scopings_container scoping" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="fields_container" n="2" doc="Fields container already allocated modified inplace" types="fields_container" optional="true"ellipsis="false"inplace="true"></pin-def><pin-def name="streams_container" n="3" doc="result file container allowed to be kept open to cache data" types="streams_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="data_sources" n="4" doc="result file path container, used if no streams are set" types="data_sources" optional="false"ellipsis="false"inplace="false"></pin-def><pin-def name="bool_rotate_to_global" n="5" doc="if true the field is rotated to global coordinate system (default true)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="mesh" n="7" doc="mesh. If cylic expansion is to be done, mesh of the base sector" types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="requested_location" n="9" doc="requested location Nodal, Elemental or ElementalNodal" types="string" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_cyclic" n="14" doc="if 0 cyclic symmetry is ignored, if 1 cyclic sector is read, if 2 cyclic expansion is done, if 3 cyclic expansion is done and stages are merged (default is 1)" types="enum dataProcessing::ECyclicReading int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="expanded_meshed_region" n="15" doc="mesh expanded, use if cyclic expansion is to be done." types="abstract_meshed_region meshes_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="sectors_to_expand" n="18" doc="sectors to expand (start at 0), for multistage: use scopings container with 'stage' label, use if cyclic expansion is to be done." types="vector<int32> scoping scopings_container" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="phi" n="19" doc="angle phi in degrees (default value 0.0), use if cyclic expansion is to be done." types="double" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="read_beams" n="22" doc="elemental nodal beam results are read if this pin is set to true (default is false)" types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_shells" n="26" doc="This pin forces elemental nodal shell and solid results to be split if this pin is set to true. If set to false (default), a specific shell layer is still needed to merge the fields. Merge is possible only if a shell layer is provided." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="shell_layer" n="27" doc="If the requested_location pin is not connected, and if split_shells pin is set to true, we choose one of the shell layer for shell element. If split_shells pin is set to false (default value) and a specific shell layer is provided, results will be merged on this specific shell layer." types="int32" optional="true"ellipsis="false"inplace="false"></pin-def><pin-def name="split_force_components" n="200" doc="If this pin is set to true, the output fields container splits the ENF by degree of freedom ('dof' label, 0 for translation, 1 for rotation, 2 for temperature) and derivative order ('derivative_order' label, 0 for stiffness terms, 1 for damping terms and 2 for inertial terms). Default is false." types="bool" optional="true"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Outputs</h2><pin-def name="fields_container" n="0" doc="" types="fields_container" optional="false"ellipsis="false"inplace="false"></pin-def><h2 class="op-des-h2">Configurations</h2><config-spec name="mutex" default="false" doc="If this option is set to true, the shared memory is prevented from being simultaneously accessed by multiple threads." types="bool" ></config-spec><config-spec name="num_threads" default="0" doc="Number of threads to use to run in parallel" types="int32" ></config-spec><config-spec name="run_in_parallel" default="true" doc="Loops are allowed to run in parallel if the value of this config is set to true." types="bool" ></config-spec><h2 class="op-des-h2">Scripting</h2><scripting-part scripting_name="element_nodal_forces" license="none" cat="result" plugin="core" cpp-name="ENF"></scripting-part></div><div class="operator" id="compute total strain Z" scripting_name="compute_total_strain_Z"plugin="live post"cat="result"><h1 class="op-des-h1">result: compute total strain Z</h1><h2 class="op-des-h2">Version: 0.0.0</h2><op-description description="Computes the strain from a displacement field.
 Only SOLID185 (B-Bar, Simplified Enhanced Strain, Enhanced Strain formulations), SOLID186 (Full Integration) & SOLID187 elements are supported.
 Layered elements are not supported.
 Thermal strains are not supported.
diff --git a/src/ansys/dpf/core/operators/math/min_max_over_time.py b/src/ansys/dpf/core/operators/math/min_max_over_time.py
index 3d2210045ac..4c5ca544d0e 100644
--- a/src/ansys/dpf/core/operators/math/min_max_over_time.py
+++ b/src/ansys/dpf/core/operators/math/min_max_over_time.py
@@ -27,7 +27,8 @@ class min_max_over_time(Operator):
 
     Returns
     -------
-    fields_container: FieldsContainer
+    field_container_1: FieldsContainer
+    field_container_2: FieldsContainer, optional
 
     Examples
     --------
@@ -49,7 +50,8 @@ class min_max_over_time(Operator):
     ... )
 
     >>> # Get output data
-    >>> result_fields_container = op.outputs.fields_container()
+    >>> result_field_container_1 = op.outputs.field_container_1()
+    >>> result_field_container_2 = op.outputs.field_container_2()
     """
 
     def __init__(self, fields_container=None, int32=None, config=None, server=None):
@@ -85,11 +87,17 @@ def _spec() -> Specification:
             },
             map_output_pin_spec={
                 0: PinSpecification(
-                    name="fields_container",
+                    name="field_container_1",
                     type_names=["fields_container"],
                     optional=False,
                     document=r"""""",
                 ),
+                1: PinSpecification(
+                    name="field_container_2",
+                    type_names=["fields_container"],
+                    optional=True,
+                    document=r"""""",
+                ),
             },
         )
         return spec
@@ -213,17 +221,20 @@ class OutputsMinMaxOverTime(_Outputs):
     >>> from ansys.dpf import core as dpf
     >>> op = dpf.operators.math.min_max_over_time()
     >>> # Connect inputs : op.inputs. ...
-    >>> result_fields_container = op.outputs.fields_container()
+    >>> result_field_container_1 = op.outputs.field_container_1()
+    >>> result_field_container_2 = op.outputs.field_container_2()
     """
 
     def __init__(self, op: Operator):
         super().__init__(min_max_over_time._spec().outputs, op)
-        self._fields_container = Output(min_max_over_time._spec().output_pin(0), 0, op)
-        self._outputs.append(self._fields_container)
+        self._field_container_1 = Output(min_max_over_time._spec().output_pin(0), 0, op)
+        self._outputs.append(self._field_container_1)
+        self._field_container_2 = Output(min_max_over_time._spec().output_pin(1), 1, op)
+        self._outputs.append(self._field_container_2)
 
     @property
-    def fields_container(self) -> Output:
-        r"""Allows to get fields_container output of the operator
+    def field_container_1(self) -> Output:
+        r"""Allows to get field_container_1 output of the operator
 
         Returns
         -------
@@ -235,6 +246,24 @@ def fields_container(self) -> Output:
         >>> from ansys.dpf import core as dpf
         >>> op = dpf.operators.math.min_max_over_time()
         >>> # Get the output from op.outputs. ...
-        >>> result_fields_container = op.outputs.fields_container()
+        >>> result_field_container_1 = op.outputs.field_container_1()
         """
-        return self._fields_container
+        return self._field_container_1
+
+    @property
+    def field_container_2(self) -> Output:
+        r"""Allows to get field_container_2 output of the operator
+
+        Returns
+        -------
+        output:
+            An Output instance for this pin.
+
+        Examples
+        --------
+        >>> from ansys.dpf import core as dpf
+        >>> op = dpf.operators.math.min_max_over_time()
+        >>> # Get the output from op.outputs. ...
+        >>> result_field_container_2 = op.outputs.field_container_2()
+        """
+        return self._field_container_2
diff --git a/src/ansys/dpf/gatebin/Ans.Dpf.GrpcClient.dll b/src/ansys/dpf/gatebin/Ans.Dpf.GrpcClient.dll
index e37e69c6cf9..928ba0593fa 100644
Binary files a/src/ansys/dpf/gatebin/Ans.Dpf.GrpcClient.dll and b/src/ansys/dpf/gatebin/Ans.Dpf.GrpcClient.dll differ
diff --git a/src/ansys/dpf/gatebin/DPFClientAPI.dll b/src/ansys/dpf/gatebin/DPFClientAPI.dll
index 61cb37046ae..1f726bcb858 100644
Binary files a/src/ansys/dpf/gatebin/DPFClientAPI.dll and b/src/ansys/dpf/gatebin/DPFClientAPI.dll differ
diff --git a/src/ansys/dpf/gatebin/libAns.Dpf.GrpcClient.so b/src/ansys/dpf/gatebin/libAns.Dpf.GrpcClient.so
index 3900e1a62e2..d66bb0c26f7 100644
Binary files a/src/ansys/dpf/gatebin/libAns.Dpf.GrpcClient.so and b/src/ansys/dpf/gatebin/libAns.Dpf.GrpcClient.so differ
diff --git a/src/ansys/dpf/gatebin/libDPFClientAPI.so b/src/ansys/dpf/gatebin/libDPFClientAPI.so
index 56b775a24cf..63118a127a7 100644
Binary files a/src/ansys/dpf/gatebin/libDPFClientAPI.so and b/src/ansys/dpf/gatebin/libDPFClientAPI.so differ