Merge pull request #17 from arduino-libraries/v0.9.7-b

V0.9.8

Author: marqdevx

Readme.md

@@ -10,7 +10,7 @@ Read more about the Kits:
 
 
 For more information about this library please visit us at
-https://www.arduino.cc/reference/en/libraries/arduino_mkriotcarrier/
+http://www.arduino.cc/en/Reference/MKRIoTCarrier
 
 ## License 
 

examples/Actuators/Buzzer_Melody/Buzzer_Melody.ino

@@ -8,7 +8,6 @@
 #include "pitches.h"
 
 MKRIoTCarrier carrier;
-bool CARRIER_CASE = false;
 
 // notes in the melody:
 int melody[] = {
@@ -21,6 +20,9 @@ int noteDurations[] = {
 };
 
 void setup() {
+  CARRIER_CASE = false;
+  carrier.begin();
+  
   // iterate over the notes of the melody:
   for (int thisNote = 0; thisNote < 8; thisNote++) {
 

examples/Actuators/Relays_blink/Relays_blink.ino

@@ -1,12 +1,12 @@
 #include <Arduino_MKRIoTCarrier.h>
 
 MKRIoTCarrier carrier;
-bool CARRIER_CASE = false;
 
 void setup() {
 
   Serial.begin(9600);
   Serial.println("Init");
+  CARRIER_CASE = false;
   carrier.begin();
 }
 

examples/All_Features/All_Features.ino

@@ -6,9 +6,6 @@ Unless the touch pads
 #include <Arduino_MKRIoTCarrier.h>
 MKRIoTCarrier carrier; //Constructor of the carrier maybe we can include it on the library itself
 
-//Set the pad sense distance for using them with or without the enclosure
-bool CARRIER_CASE = false;
-
 float temperature;
 float humidity;
 
@@ -27,6 +24,7 @@ void setup() {
   while (!Serial);  //Wait to open the Serial monitor to start the program and see details on errors
 
   //Init everything and outputs the errors
+  CARRIER_CASE = false;
   carrier.begin();
 }
 

examples/Display/Compose_images/Compose_images.ino

@@ -10,12 +10,12 @@
 #include <Arduino_MKRIoTCarrier.h>
 MKRIoTCarrier carrier;
 
-bool CARRIER_CASE = false;
 
 uint32_t orange = carrier.leds.Color(50, 242, 0);
 
 void setup() {
   Serial.begin(9600);
+  CARRIER_CASE = false;
   carrier.begin();
 
   uint16_t time = millis();

examples/Display/Graphics/Graphics.ino

@@ -6,12 +6,12 @@
 MKRIoTCarrier carrier;
 
 float p = 3.1415926;
-bool CARRIER_CASE = false;
 
 void setup(void) {
 
   Serial.begin(9600);
   Serial.print(F("Hello! ST77xx TFT Test"));
+  CARRIER_CASE = false;
   carrier.begin();
 
   uint16_t time = millis();

examples/Grove_Inputs/Grove_Inputs.ino

@@ -1,9 +1,6 @@
 #include <Arduino_MKRIoTCarrier.h>
 MKRIoTCarrier carrier; //Constructor of the carrier maybe we can include it on the library itself
 
-//Set the pad sense distance for using them with or without the enclosure
-bool CARRIER_CASE = false;
-
 //Be sure that the Pins are the same as your wiring
 int moisture = A5;
 int moist;
@@ -14,6 +11,7 @@ void setup() {
   // put your setup code here, to run once:
   Serial.begin(9600);
   while(!Serial);
+  CARRIER_CASE = false;
   carrier.begin();
   pinMode(moisture,INPUT);
   pinMode(pir,INPUT);

examples/LEDs-Examples/strandtest/strandtest.ino

@@ -1,10 +1,10 @@
 #include <Arduino_MKRIoTCarrier.h>
 MKRIoTCarrier carrier;
-bool CARRIER_CASE;
 
 #define NUMPIXELS 5
 
 void setup() {
+  CARRIER_CASE = false;
   carrier.begin();
 }
 

examples/SD_card/SD_card.ino

@@ -1,6 +1,5 @@
 #include <Arduino_MKRIoTCarrier.h>
 MKRIoTCarrier carrier;
-bool CARRIER_CASE = false;
 
 File myFile;
 
@@ -12,6 +11,7 @@ void setup() {
   }
 
   //  Init the entire Carrier
+  CARRIER_CASE = false;
   carrier.begin();
 
   // open the file. note that only one file can be open at a time,

examples/Sensors/ENV-HTS221/ReadSensors/ReadSensors.ino

@@ -4,13 +4,13 @@
 
 #include <Arduino_MKRIoTCarrier.h>
 MKRIoTCarrier carrier;
-bool CARRIER_CASE = false;
 
 
 void setup() {
   Serial.begin(9600);
   while (!Serial);
 
+  CARRIER_CASE = false;
   carrier.begin();
 }