Merge pull request #2263 from arduino/taddy/pro-4g-module-AT-comm-quick-format-patch

Pro 4G Module: Related Documentation Note Format Patch

Author: TaddyHC

content/hardware/04.pro/carriers/portenta-max-carrier/tutorials/mpcie-4g-modem/content.md

@@ -358,7 +358,7 @@ The **EMEA (EC200A-EU) Module** mainly uses raw AT commands over a USB serial in
 mmcli -m 0 --simple-connect='apn=iot.1nce.net,ip-type=ipv4v6'
 ```
 
-***The **EC200A-EU** modem is not compatible with __QMI__. It requires raw AT commands over a USB serial interface. For more information, refer to the [Quectel EC200A-EU documentation](https://python.quectel.com/en/products/ec200a-eu).***
+***The __EC200A-EU__ modem is not compatible with __QMI__. It requires raw AT commands over a USB serial interface. For more information, refer to the [Quectel EC200A-EU documentation](https://python.quectel.com/en/products/ec200a-eu).***
 
 The latest images include the necessary `udev` rules to automatically manage the `ec200aeu` interface. You can verify this by checking the `75-ec200aeu.rules` file using the following command:
 
@@ -397,7 +397,7 @@ sudo systemctl disable ModemManager
 
 Once **ModemManager** has been disabled, you can use **qmicli** to communicate reliably with the QMI interface for modem operations.
 
-***The **EC200A-EU** modem is not compatible with __QMI__. It requires raw AT commands over a USB serial interface. For more information, refer to the [Quectel EC200A-EU documentation](https://python.quectel.com/en/products/ec200a-eu).***
+***The __EC200A-EU__ modem is not compatible with __QMI__. It requires raw AT commands over a USB serial interface. For more information, refer to the [Quectel EC200A-EU documentation](https://python.quectel.com/en/products/ec200a-eu).***
 
 #### Raw IP Mode Setup for QMI Based Modems
 
@@ -498,7 +498,7 @@ Inside the container, an **entrypoint.sh** script can control the modem's power
 gpioset gpiochip5 5=1
 ```
 
-***It is required to have **PCIE Enable (GPIO5)** pin connected to the **VCC (3V3)** pin to secure the power supply line.***
+***It is required to have __PCIE Enable (GPIO5)__ pin connected to the __VCC (3V3)__ pin to secure the power supply line.***
 
 This will enable the power to the modem and add a delay for proper modem initialization:
 

content/hardware/04.pro/carriers/portenta-mid-carrier/tutorials/user-manual/content.md

@@ -2009,7 +2009,7 @@ It is available in two variants, **EMEA** and **Global (covering the US)**. This
 
 ![Arduino Pro 4G GNSS Module Global / Module EMEA](assets/portentaQuectel_overview.gif)
 
-***Make sure to attach external antennas to the Pro 4G Module to work correctly with wireless signals. There are three external antenna connectors: a main antenna connector, an Rx-diversity antenna connector, and a GNSS antenna connector. The impedance of the antenna connectors is **50 Ω**.***
+***Make sure to attach external antennas to the Pro 4G Module to work correctly with wireless signals. There are three external antenna connectors: a main antenna connector, an Rx-diversity antenna connector, and a GNSS antenna connector. The impedance of the antenna connectors is __50 Ω__.***
 
 #### Setting Up Via Out-Of-The-Box Experience
 
@@ -2163,7 +2163,7 @@ ip link set dev wwan0 up
 
 This step ensures the modem functions properly in QMI mode.
 
-***The **EC200A-EU** modem is not compatible with __QMI__. It requires raw AT commands over a USB serial interface. For more information, refer to the [Quectel EC200A-EU documentation](https://python.quectel.com/en/products/ec200a-eu).***
+***The __EC200A-EU__ modem is not compatible with __QMI__. It requires raw AT commands over a USB serial interface. For more information, refer to the [Quectel EC200A-EU documentation](https://python.quectel.com/en/products/ec200a-eu).***
 
 #### ModemManager and Power Management Service