Update content/Hardware Support/Nano Family/Nano-family-overview.md

Co-authored-by: seaxwi <[email protected]>

Author: Renat0Ribeir0

content/Hardware Support/Nano Family/Nano-family-overview.md

@@ -112,7 +112,7 @@ Besides the pinout layout, there are other visual differences in the Nano Family
 
 ### VUSB pads
 
-It is possible to [enable 5 V power on the VUSB or VBUS pin on Nano boards](https://support.arduino.cc/hc/en-us/articles/360014779679-Enable-5-V-power-on-the-VUSB-or-VBUS-pin-on-Nano-boards) that operate on 3.3V. On all of these boards (except the Nano ESP32), two VUSB pads must be shorted in order to enable the VUSB pin. On the Nano ESP 32, the VBUS pin is enabled by default and these two pads are not present.
+It is possible to [enable 5 V power on the VUSB or VBUS pin on Nano boards](https://support.arduino.cc/hc/en-us/articles/360014779679-Enable-5-V-power-on-the-VUSB-or-VBUS-pin-on-Nano-boards) that operate at 3.3 V. On all of these boards (except the Nano ESP32), two VUSB pads must be shorted in order to enable the VUSB pin. On the Nano ESP 32, the VBUS pin is enabled by default and these two pads are not present.
 
 <table>
   <tr>