Merge pull request hathach#1543 from robert-hh/1170_0.13.0

hathach · web-flow · commit 0bfb9d62de3a · 2022-07-11T15:53:24.000+07:00
mimxrt: Change the definitions for MIMXRT boards.
diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt
@@ -3,7 +3,9 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
+mcu:MIMXRT
 mcu:MIMXRT10XX
+mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt
@@ -3,7 +3,9 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
+mcu:MIMXRT
 mcu:MIMXRT10XX
+mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt
@@ -3,7 +3,9 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
+mcu:MIMXRT
 mcu:MIMXRT10XX
+mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h
@@ -110,7 +110,7 @@
 #elif CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI
   // no header needed
 
-#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "fsl_device_registers.h"
 
 #elif CFG_TUSB_MCU == OPT_MCU_NUC120
diff --git a/hw/bsp/f1c100s/README.md b/hw/bsp/f1c100s/README.md
@@ -17,4 +17,4 @@ Flash: `make BOARD=f1c100s flash` will write the image to SPI flash, and then re
 
 ## TODO
 
-* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX` high speed MCU check in examples (maybe we should extract the logic?)
+* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?)
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h
@@ -45,7 +45,7 @@
 
 // UART
 #define UART_PORT             LPUART1
-#define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_13_LPUART1_RX
-#define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_12_LPUART1_TX
+#define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
+#define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
 
 #endif /* BOARD_H_ */
diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk
@@ -13,7 +13,7 @@ CFLAGS += \
   -D__ARMVFP__=0 -D__ARMFPV5__=0\
   -DXIP_EXTERNAL_FLASH=1 \
   -DXIP_BOOT_HEADER_ENABLE=1 \
-  -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
+  -DCFG_TUSB_MCU=OPT_MCU_MIMXRT
 
 ifdef BOARD_TUD_RHPORT
 CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT)
diff --git a/hw/mcu/nxp/mcux-sdk b/hw/mcu/nxp/mcux-sdk
@@ -1 +1 @@
-Subproject commit cb21c660991c92e90ece99ccb63a4bc611899c3a
+Subproject commit ae2ab01d9d70ad00cd0e935c2552bd5f0e5c0294
diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c
@@ -66,7 +66,7 @@
 
 // Use ring buffer if it's available, some MCUs need extra RAM requirements
 #ifndef TUD_AUDIO_PREFER_RING_BUFFER
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT
 #define TUD_AUDIO_PREFER_RING_BUFFER 0
 #else
 #define TUD_AUDIO_PREFER_RING_BUFFER 1
@@ -102,7 +102,7 @@
     CFG_TUSB_MCU == OPT_MCU_GD32VF103                             || \
     CFG_TUSB_MCU == OPT_MCU_LPC18XX                               || \
     CFG_TUSB_MCU == OPT_MCU_LPC43XX                               || \
-    CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX                            || \
+    CFG_TUSB_MCU == OPT_MCU_MIMXRT                                || \
     CFG_TUSB_MCU == OPT_MCU_MSP432E4
 #if TUD_AUDIO_PREFER_RING_BUFFER
 #define  USE_LINEAR_BUFFER     0
diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h
@@ -75,7 +75,7 @@
   // TODO USB0 has 5, USB1 has 6
   #define TUP_DCD_ENDPOINT_MAX    6
 
-#elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX)
+#elif TU_CHECK_MCU(OPT_MCU_MIMXRT)
   #define TUP_USBIP_CHIPIDEA_HS
   #define TUP_USBIP_EHCI
 
diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h
@@ -29,6 +29,14 @@
 
 #include "fsl_device_registers.h"
 
+#if !defined(USB1_BASE) && defined(USB_OTG1_BASE)
+#define USB1_BASE USB_OTG1_BASE
+#endif
+
+#if !defined(USB2_BASE) && defined(USB_OTG2_BASE)
+#define USB2_BASE USB_OTG2_BASE
+#endif
+
 static const ci_hs_controller_t _ci_controller[] =
 {
   // RT1010 and RT1020 only has 1 USB controller
diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c
@@ -34,7 +34,7 @@
 #include "device/dcd.h"
 #include "ci_hs_type.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "ci_hs_imxrt.h"
 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
   #include "ci_hs_lpc18_43.h"
diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c
@@ -29,7 +29,7 @@
 // Chipidea Highspeed USB IP implement EHCI for host functionality
 
 #if CFG_TUH_ENABLED && \
-    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
+    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -39,7 +39,7 @@
 #include "portable/ehci/ehci_api.h"
 #include "ci_hs_type.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "ci_hs_imxrt.h"
 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
   #include "ci_hs_lpc18_43.h"
diff --git a/src/portable/nxp/transdimension/dcd_transdimension.c b/src/portable/nxp/transdimension/dcd_transdimension.c
@@ -27,14 +27,14 @@
 #include "tusb_option.h"
 
 #if CFG_TUD_ENABLED && \
-    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
+    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT)
 
 #warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly"
 
 //--------------------------------------------------------------------+
 // INCLUDE
 //--------------------------------------------------------------------+
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "fsl_device_registers.h"
   #define INCLUDE_FSL_DEVICE_REGISTERS
 #else
@@ -153,7 +153,7 @@ typedef struct
   const uint8_t ep_count; // Max bi-directional Endpoints
 }dcd_controller_t;
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   static const dcd_controller_t _dcd_controller[] =
   {
     // RT1010 and RT1020 only has 1 USB controller
diff --git a/src/portable/nxp/transdimension/hcd_transdimension.c b/src/portable/nxp/transdimension/hcd_transdimension.c
@@ -29,14 +29,14 @@
 // NXP Trans-Dimension USB IP implement EHCI for host functionality
 
 #if CFG_TUH_ENABLED && \
-    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX)
+    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT)
 
 #warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly"
 
 //--------------------------------------------------------------------+
 // INCLUDE
 //--------------------------------------------------------------------+
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   #include "fsl_device_registers.h"
 #else
   // LPCOpen for 18xx & 43xx
@@ -58,7 +58,7 @@ typedef struct
   const IRQn_Type irqnum; // IRQ number
 }hcd_controller_t;
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
   static const hcd_controller_t _hcd_controller[] =
   {
     // RT1010 and RT1020 only has 1 USB controller
diff --git a/src/tusb_option.h b/src/tusb_option.h
@@ -98,7 +98,9 @@ typedef int make_iso_compilers_happy;
 #define OPT_MCU_VALENTYUSB_EPTRI  600 ///< Fomu eptri config
 
 // NXP iMX RT
-#define OPT_MCU_MIMXRT10XX        700 ///< NXP iMX RT10xx
+#define OPT_MCU_MIMXRT            700             ///< NXP iMX RT Series
+#define OPT_MCU_MIMXRT10XX        OPT_MCU_MIMXRT  ///< RT10xx
+#define OPT_MCU_MIMXRT11XX        OPT_MCU_MIMXRT  ///< RT11xx
 
 // Nuvoton
 #define OPT_MCU_NUC121            800

Original file line number	Diff line number	Diff line change
@@ -17,4 +17,4 @@ Flash: `make BOARD=f1c100s flash` will write the image to SPI flash, and then re
`17`	`17`
`18`	`18`	`## TODO`
`19`	`19`
`20`		-* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX \|\| CFG_TUSB_MCU == OPT_MCU_LPC18XX \|\| CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX` high speed MCU check in examples (maybe we should extract the logic?)
	`20`	+* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX \|\| CFG_TUSB_MCU == OPT_MCU_LPC18XX \|\| CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?)