more update to kinetis bsp

Author: hathach

docs/reference/supported.rst

@@ -253,7 +253,7 @@ Kinetis
 ^^^^^^^
 
 -  `Freedom FRDM-KL25Z <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z>`__
--  `Freedom FRDM-K32L2A  <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/nxp-freedom-platform-for-k32-l2a-mcus:FRDM-K32L2A4S>`__
+-  `Freedom FRDM-K32L2A4S  <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/nxp-freedom-platform-for-k32-l2a-mcus:FRDM-K32L2A4S>`__
 -  `Freedom FRDM-K32L2B3 <https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/nxp-freedom-development-platform-for-k32-l2b-mcus:FRDM-K32L2B3>`__
 -  `KUIIC <https://github.com/nxf58843/kuiic>`__
 

hw/bsp/board_mcu.h

@@ -39,15 +39,15 @@
 //--------------------------------------------------------------------+
 
 // Include order follows OPT_MCU_ number
-#if   CFG_TUSB_MCU == OPT_MCU_LPC11UXX   || CFG_TUSB_MCU == OPT_MCU_LPC13XX    || \
-      CFG_TUSB_MCU == OPT_MCU_LPC15XX    || CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || \
-      CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC18XX    || \
-      CFG_TUSB_MCU == OPT_MCU_LPC40XX    || CFG_TUSB_MCU == OPT_MCU_LPC43XX
+#if   TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) || \
+      TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC18XX)  || \
+      TU_CHECK_MCU(OPT_MCU_LPC40XX, OPT_MCU_LPC43XX)
   #include "chip.h"
 
-#elif CFG_TUSB_MCU == OPT_MCU_LPC51UXX || CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \
-      CFG_TUSB_MCU == OPT_MCU_LPC55XX  || CFG_TUSB_MCU == OPT_MCU_MKL25ZXX || \
-      CFG_TUSB_MCU == OPT_MCU_K32L2AXX || OPT_MCU_K32L2BXX
+#elif TU_CHECK_MCU(OPT_MCU_LPC51UXX, OPT_MCU_LPC54XXX, OPT_MCU_LPC55XX)
+  #include "fsl_device_registers.h"
+
+#elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32)
   #include "fsl_device_registers.h"
 
 #elif CFG_TUSB_MCU == OPT_MCU_NRF5X

hw/bsp/kinetis/boards/frdm_k32l2a4s/board.h renamed to hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.h

@@ -1,18 +1,18 @@
-SDK_DIR = hw/mcu/nxp/mcux-sdk
 MCU = K32L2A41A
-MCU_DIR = $(SDK_DIR)/devices/$(MCU)
 
 CFLAGS += \
   -mcpu=cortex-m0plus \
   -DCPU_K32L2A41VLH1A \
-  -DCFG_TUSB_MCU=OPT_MCU_K32L2AXX
 
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual
 
 # All source paths should be relative to the top level.
 LD_FILE = $(MCU_DIR)/gcc/K32L2A41xxxxA_flash.ld
 
+SRC_C += \
+	$(MCU_DIR)/project_template/clock_config.c \
+
 # For freeRTOS port source
 FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
 

hw/bsp/kinetis/boards/frdm_k32l2a4s/board.mk renamed to hw/bsp/kinetis_k32/boards/frdm_k32l2a4s/board.mk

@@ -1,18 +1,18 @@
-SDK_DIR = hw/mcu/nxp/mcux-sdk
 MCU = K32L2B31A
-MCU_DIR = $(SDK_DIR)/devices/$(MCU)
 
 CFLAGS += \
   -mcpu=cortex-m0plus \
   -DCPU_K32L2B31VLH0A \
-  -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX
 
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls
 
 # All source paths should be relative to the top level.
 LD_FILE = $(MCU_DIR)/gcc/K32L2B31xxxxA_flash.ld
 
+SRC_C += \
+	$(MCU_DIR)/project_template/clock_config.c \
+
 # For freeRTOS port source
 FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0