renam OPT_MCU_MIMXRT to OPT_MCU_MIMXRT1XXX

hathach · hathach · commit 8af8869d3bcb · 2023-06-16T11:26:38.000+07:00
fix build util with makefile
diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt
@@ -3,7 +3,7 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt
@@ -3,7 +3,7 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt
@@ -3,7 +3,7 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt
@@ -3,7 +3,7 @@ mcu:LPC177X_8X
 mcu:LPC18XX
 mcu:LPC40XX
 mcu:LPC43XX
-mcu:MIMXRT
+mcu:MIMXRT1XXX
 mcu:MIMXRT10XX
 mcu:MIMXRT11XX
 mcu:RP2040
diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h
@@ -116,7 +116,7 @@
 #elif CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI
   // no header needed
 
-#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT
+#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX
   #include "fsl_device_registers.h"
 
 #elif CFG_TUSB_MCU == OPT_MCU_NUC120
diff --git a/hw/bsp/f1c100s/README.md b/hw/bsp/f1c100s/README.md
@@ -17,4 +17,4 @@ Flash: `make BOARD=f1c100s flash` will write the image to SPI flash, and then re
 
 ## TODO
 
-* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?)
+* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX` high speed MCU check in examples (maybe we should extract the logic?)
diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake
@@ -14,7 +14,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
 set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor")
 set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
-set(FAMILY_MCUS MIMXRT CACHE INTERNAL "")
+set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "")
 
 # enable LTO if supported
 include(CheckIPOSupported)
@@ -119,7 +119,7 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB
-  family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT)
+  family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX)
 
   # Link dependencies
   target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk
@@ -13,7 +13,7 @@ CFLAGS += \
   -D__ARMVFP__=0 -D__ARMFPV5__=0\
   -DXIP_EXTERNAL_FLASH=1 \
   -DXIP_BOOT_HEADER_ENABLE=1 \
-  -DCFG_TUSB_MCU=OPT_MCU_MIMXRT
+  -DCFG_TUSB_MCU=OPT_MCU_MIMXRT1XXX
 
 ifdef BOARD_TUD_RHPORT
 CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT)
diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c
@@ -66,7 +66,7 @@
 
 // Use ring buffer if it's available, some MCUs need extra RAM requirements
 #ifndef TUD_AUDIO_PREFER_RING_BUFFER
-  #if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT
+  #if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX
     #define TUD_AUDIO_PREFER_RING_BUFFER 0
   #else
     #define TUD_AUDIO_PREFER_RING_BUFFER 1
@@ -85,7 +85,7 @@
     CFG_TUSB_MCU == OPT_MCU_RX72N     || \
     CFG_TUSB_MCU == OPT_MCU_LPC18XX   || \
     CFG_TUSB_MCU == OPT_MCU_LPC43XX   || \
-    CFG_TUSB_MCU == OPT_MCU_MIMXRT    || \
+    CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX    || \
     CFG_TUSB_MCU == OPT_MCU_MSP432E4
   #if TUD_AUDIO_PREFER_RING_BUFFER
     #define  USE_LINEAR_BUFFER     0
diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h
@@ -90,7 +90,7 @@
   #define TUP_DCD_ENDPOINT_MAX    8
   #define TUP_RHPORT_HIGHSPEED    1
 
-#elif TU_CHECK_MCU(OPT_MCU_MIMXRT)
+#elif TU_CHECK_MCU(OPT_MCU_MIMXRT1XXX)
   #define TUP_USBIP_CHIPIDEA_HS
   #define TUP_USBIP_EHCI
 
diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c
@@ -31,7 +31,7 @@
 #include "device/dcd.h"
 #include "ci_hs_type.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX
   #include "ci_hs_imxrt.h"
 
   void dcd_dcache_clean(void* addr, uint32_t data_size) {
diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c
@@ -28,8 +28,7 @@
 
 // Chipidea Highspeed USB IP implement EHCI for host functionality
 
-#if CFG_TUH_ENABLED && \
-    (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT)
+#if CFG_TUH_ENABLED && defined(TUP_USBIP_EHCI)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -39,7 +38,7 @@
 #include "portable/ehci/ehci_api.h"
 #include "ci_hs_type.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_MIMXRT
+#if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX
   #include "ci_hs_imxrt.h"
 
   void hcd_dcache_clean(void* addr, uint32_t data_size) {
diff --git a/src/tusb_option.h b/src/tusb_option.h
@@ -97,9 +97,9 @@
 #define OPT_MCU_VALENTYUSB_EPTRI  600 ///< Fomu eptri config
 
 // NXP iMX RT
-#define OPT_MCU_MIMXRT            700             ///< NXP iMX RT Series
-#define OPT_MCU_MIMXRT10XX        OPT_MCU_MIMXRT  ///< RT10xx
-#define OPT_MCU_MIMXRT11XX        OPT_MCU_MIMXRT  ///< RT11xx
+#define OPT_MCU_MIMXRT1XXX        700                 ///< NXP iMX RT1xxx Series
+#define OPT_MCU_MIMXRT10XX        OPT_MCU_MIMXRT1XXX  ///< RT10xx
+#define OPT_MCU_MIMXRT11XX        OPT_MCU_MIMXRT1XXX  ///< RT11xx
 
 // Nuvoton
 #define OPT_MCU_NUC121            800
diff --git a/tools/build_utils.py b/tools/build_utils.py
@@ -30,13 +30,8 @@ def skip_example(example, board):
         family_dir = board_dir.parent.parent
         family = family_dir.name
 
-        # family CMake
-        family_mk = family_dir / "family.cmake"
-
         # family.mk
-        if not family_mk.exists():
-            family_mk = family_dir / "family.mk"
-
+        family_mk = family_dir / "family.mk"
         mk_contents = family_mk.read_text()
 
     # Find the mcu, first in family mk then board mk

Original file line number	Diff line number	Diff line change
@@ -17,4 +17,4 @@ Flash: `make BOARD=f1c100s flash` will write the image to SPI flash, and then re
`17`	`17`
`18`	`18`	`## TODO`
`19`	`19`
`20`		-* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX \|\| CFG_TUSB_MCU == OPT_MCU_LPC18XX \|\| CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?)
	`20`	+* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX \|\| CFG_TUSB_MCU == OPT_MCU_LPC18XX \|\| CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX` high speed MCU check in examples (maybe we should extract the logic?)