Merge pull request hathach#2148 from hathach/imxrt-bsp

Imxrt bsp

Author: hathach

.idea/runConfigurations/mcx947.xml

@@ -1,6 +1,6 @@
 set(MCU_VARIANT MIMXRT1011)
 
-set(JLINK_DEVICE MIMXRT1011DAE5A)
+set(JLINK_DEVICE MIMXRT1011xxx5A)
 set(PYOCD_TARGET mimxrt1010)
 set(NXPLINK_DEVICE MIMXRT1011xxxxx:EVK-MIMXRT1010)
 

.idea/runConfigurations/rt1010.xml

@@ -5,7 +5,7 @@ MCU_VARIANT = MIMXRT1011
 LD_FILE = $(BOARD_PATH)/$(BOARD).ld
 
 # For flash-jlink target
-JLINK_DEVICE = MIMXRT1011DAE5A
+JLINK_DEVICE = MIMXRT1011xxx5A
 
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1010

hw/bsp/imxrt/boards/metro_m7_1011/board.cmake

@@ -0,0 +1,340 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1010-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: ADC_ALT_CLK.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY_CLK.outFreq, value: 480 MHz}
+settings:
+- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true}
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5'}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK}
+- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM_ANALOG.PLL2.denom, value: '1'}
+- {id: CCM_ANALOG.PLL2.num, value: '0'}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 0);
+    CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0);
+#endif
+    /* Disable ADC_ACLK_EN clock gate. */
+    CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK;
+    /* Set ADC_ACLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_AdcDiv, 11);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */
+    /* Set Pll3 SW clock source to use the USB1 PLL output. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Set safe value of the AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 1);
+    /* Set periph clock2 clock source to use the PLL3_SW_CLK. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}