Merge branch 'add-esp32-s3-support' into add-freenove-board-support

argetlam-coder · argetlam-coder · commit b978244035ad · 2025-07-19T04:58:28.000+02:00
diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml
@@ -1,6 +1,10 @@
 name: Build and Pack
 
-on: [push, pull_request]
+on:
+    push:
+    pull_request:
+    release:
+        types: [released] # Only trigger on published releases (not drafts or pre-released)
 
 jobs:
 #########################################################################################
@@ -304,7 +308,7 @@ jobs:
   prepare-release: 
     runs-on: ubuntu-latest
     needs: [pack-for-update, pack-for-manual_setup, pack-for-remote_setup]
-    if: startsWith(github.ref, 'refs/tags/') 
+    if: github.event_name == 'release' # Only run when the trigger is a release
 
     # Sets permissions of the GITHUB_TOKEN to allow updating the branches
     permissions:
@@ -406,7 +410,7 @@ jobs:
 #########################################################################################
 # Make sure to also update update-webinstaller.yml!
   update-web-installer:
-    if: github.event_name == 'release' && github.event.action == 'published' # Only run on release but not on prerelease
+    if: github.event_name == 'release' # Only run when the trigger is a release
     needs: [prepare-release]
     environment:
       name: github-pages
@@ -444,13 +448,13 @@ jobs:
         sed -i 's/$VERSION/${{ steps.last_release.outputs.tag_name }}/g' webinstaller/manifest.json
 
     - name: Setup Pages
-      uses: actions/configure-pages@v4
+      uses: actions/configure-pages@v5
 
     - name: Upload artifact
-      uses: actions/upload-pages-artifact@v2
+      uses: actions/upload-pages-artifact@v3
       with:
         path: 'webinstaller'
 
     - name: Deploy to GitHub Pages
       id: deployment
-      uses: actions/deploy-pages@v3  # Note: v4 does not work!
+      uses: actions/deploy-pages@v4.0.5  # Note: v4 does not work!
diff --git a/.github/workflows/reply-bot.yaml b/.github/workflows/reply-bot.yaml
@@ -18,7 +18,7 @@ permissions:
 
 jobs:
   comment:
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
 
diff --git a/code/components/jomjol_helper/Helper.cpp b/code/components/jomjol_helper/Helper.cpp
@@ -855,11 +855,21 @@ struct SDCard_Manufacturer_database sd_database[] = {
 		.id = 0x03,
 		.manufacturer = "SanDisk",
 	},
+	{
+		.type = "sd",
+		.id = 0x05,
+		.manufacturer = "Lenovo",
+	},
 	{
 		.type = "sd",
 		.id = 0x08,
 		.manufacturer = "Silicon Power",
 	},
+	{
+		.type = "sd",
+		.id = 0x09,
+		.manufacturer = "ATP",
+	},
 	{
 		.type = "sd",
 		.id = 0x18,
@@ -943,7 +953,27 @@ struct SDCard_Manufacturer_database sd_database[] = {
 	{
 		.type = "sd",
 		.id = 0x89,
-		.manufacturer = "Unknown",
+		.manufacturer = "Netac",
+	},
+	{
+		.type = "sd",
+		.id = 0x9f,
+		.manufacturer = "Kingston/Kodak/Silicon Power",
+	},
+	{
+		.type = "sd",
+		.id = 0xad,
+		.manufacturer = "Amazon Basics/Lexar/OV",
+	},
+	{
+		.type = "sd",
+		.id = 0xdf,
+		.manufacturer = "Lenovo",
+	},
+	{
+		.type = "sd",
+		.id = 0xfe,
+		.manufacturer = "Bekit/Cloudisk/HP/Reletech",
 	},
 };
 
diff --git a/code/components/jomjol_mqtt/interface_mqtt.cpp b/code/components/jomjol_mqtt/interface_mqtt.cpp
@@ -85,7 +85,7 @@ bool MQTTPublish(std::string _key, std::string _content, int qos, bool retained_
             _content.append("..");
         }
 
-        LogFile.WriteToFile(ESP_LOG_DEBUG, TAG, "Published topic: " + _key + ", content: " + _content + " (msg_id=" + std::to_string(msg_id) + ")");
+        LogFile.WriteToFile(ESP_LOG_DEBUG, TAG, "Published topic: " + _key + ", content: " + _content);
         return true;
     }
     else {
@@ -465,7 +465,7 @@ void MQTTconnected(){
        if (subscribeFunktionMap != NULL) {
             for(std::map<std::string, std::function<bool(std::string, char*, int)>>::iterator it = subscribeFunktionMap->begin(); it != subscribeFunktionMap->end(); ++it) {
                 int msg_id = esp_mqtt_client_subscribe(client, it->first.c_str(), 0);
-                LogFile.WriteToFile(ESP_LOG_DEBUG, TAG, "topic " + it->first + " subscribe successful, msg_id=" + std::to_string(msg_id));
+                LogFile.WriteToFile(ESP_LOG_DEBUG, TAG, "topic " + it->first + " subscribe successful");
             }
         }
 
diff --git a/code/components/jomjol_mqtt/server_mqtt.cpp b/code/components/jomjol_mqtt/server_mqtt.cpp
@@ -174,14 +174,14 @@ bool MQTThomeassistantDiscovery(int qos) {
 	int aFreeInternalHeapSizeBefore = heap_caps_get_free_size(MALLOC_CAP_8BIT | MALLOC_CAP_INTERNAL);
 
     //                                                   Group | Field            | User Friendly Name | Icon                      | Unit | Device Class     | State Class  | Entity Category
-    allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "uptime",          "Uptime",            "clock-time-eight-outline", "s",   "",                "",            "diagnostic", qos);
+    allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "uptime",          "Uptime",            "progress-clock",           "s",   "duration",        "measurement", "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "MAC",             "MAC Address",       "network-outline",          "",    "",                "",            "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "fwVersion",       "Firmware Version",  "application-outline",      "",    "",                "",            "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "hostname",        "Hostname",          "network-outline",          "",    "",                "",            "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "freeMem",         "Free Memory",       "memory",                   "B",   "",                "measurement", "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "wifiRSSI",        "Wi-Fi RSSI",        "wifi",                     "dBm", "signal_strength", "",            "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "CPUtemp",         "CPU Temperature",   "thermometer",              "°C",  "temperature",     "measurement", "diagnostic", qos);
-    allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "interval",        "Interval",          "clock-time-eight-outline", "min",  ""           ,    "measurement", "diagnostic", qos);
+    allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "interval",        "Interval",          "clock-time-eight-outline", "min",  "",               "measurement", "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "IP",              "IP",                "network-outline",           "",    "",               "",            "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "status",          "Status",            "list-status",               "",    "",               "",            "diagnostic", qos);
     allSendsSuccessed |= sendHomeAssistantDiscoveryTopic("",     "flowstart",       "Manual Flow Start", "timer-play-outline",        "",    "",               "",            "",           qos);
diff --git a/param-docs/parameter-pages/InfluxDB/NUMBER.Field.md b/param-docs/parameter-pages/InfluxDB/NUMBER.Field.md
@@ -4,4 +4,4 @@ Default Value: `undefined`
 Dedicated definition of the field for InfluxDB use for saving in the Influx database (e.g.: "watermeter/value").
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.Field`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.Field`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/InfluxDBv2/NUMBER.Field.md b/param-docs/parameter-pages/InfluxDBv2/NUMBER.Field.md
@@ -4,4 +4,4 @@ Default Value: `undefined`
 Field for InfluxDB v2 to use for saving.
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.Field`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.Field`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/MQTT/MeterType.md b/param-docs/parameter-pages/MQTT/MeterType.md
@@ -10,11 +10,11 @@ Alternatively you can set the parameter `DecimalShift` to `3` so the value is co
 List of supported options:
 
 - `other`
-- `water_m3` (uses `m^3/min` as rate)
+- `water_m3` (uses `m^3/h` as rate)
 - `water_l`  (uses `l/h` as rate, not officially supported by Homeassistant!)
 - `water_gal`  (uses `gal/h` as rate, not officially supported by Homeassistant!)
 - `water_ft3` (uses `ft^3/min` as rate)
-- `gas_m3` (uses `m^3/min` as rate)
+- `gas_m3` (uses `m^3/h` as rate)
 - `gas_ft3` (uses `ft^3/min` as rate)
 - `energy_wh` (uses `W` as rate)
 - `energy_kwh` (uses `KW` as rate)
diff --git a/param-docs/parameter-pages/MQTT/NUMBER.DomoticzIDX.md b/param-docs/parameter-pages/MQTT/NUMBER.DomoticzIDX.md
@@ -4,4 +4,4 @@ Default Value: `0`
 The Idx number for the counter device. Can be obtained from the devices setup page on the Domoticz system.
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.DomoticzIDX`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.DomoticzIDX`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.AllowNegativeRates.md b/param-docs/parameter-pages/PostProcessing/NUMBER.AllowNegativeRates.md
@@ -7,4 +7,4 @@ Allow a meter to count backwards (decreasing values).
     This is unusual (it means there is a negative rate) and not wanted in most cases!
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.AllowNegativeRates`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.AllowNegativeRates`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.AnalogToDigitTransitionStart.md b/param-docs/parameter-pages/PostProcessing/NUMBER.AnalogToDigitTransitionStart.md
@@ -9,4 +9,4 @@ See [here](../Watermeter-specific-analog---digit-transition) for details.
 Range: `6.0` .. `9.9`.
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.AnalogToDigitTransitionStart`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.AnalogToDigitTransitionStart`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.ChangeRateThreshold.md b/param-docs/parameter-pages/PostProcessing/NUMBER.ChangeRateThreshold.md
@@ -10,18 +10,18 @@ It is only applied to the last digit of the read value (See example below).
 If the read value is within PreValue +/- Threshold, no further calculation is carried out and the Value/Prevalue remains at the old value.
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.ChangeRateThreshold`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.ChangeRateThreshold`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
 
 ## Example
 
 - Smallest ROI provides value for `0.000'x` (Eg. a water meter with 4 pointers behind the decimal point)
 - ChangeRateThreshold = 2
   
-#### With `Extended Resolution` **disabled**
+#### With `ExtendedResolution` **disabled**
 PreValue: `123.456'7` -> Threshold = `+/-0.000'2`.<br>
 All changes between `123.456'5` and `123.456'9` get ignored
 	
-#### With `Extended Resolution` **enabled**
+#### With `ExtendedResolution` **enabled**
 PreValue: `123.456'78` -> Threshold = `+/-0.000'02`.<br>
 All changes between `123.456'76` and `123.456'80` get ignored.
 
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.CheckDigitIncreaseConsistency.md b/param-docs/parameter-pages/PostProcessing/NUMBER.CheckDigitIncreaseConsistency.md
@@ -8,4 +8,4 @@ An additional consistency check.
 It especially improves the zero crossing check between digits.
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.CheckDigitIncreaseConsistency`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.CheckDigitIncreaseConsistency`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.DecimalShift.md b/param-docs/parameter-pages/PostProcessing/NUMBER.DecimalShift.md
@@ -5,4 +5,4 @@ Shift the decimal separator (positiv or negativ).
 Eg. to move from `m³` to `liter` (`1 m³` equals `1000 liters`), you need to set it to `+3`.
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.DecimalShift`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.DecimalShift`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.ExtendedResolution.md b/param-docs/parameter-pages/PostProcessing/NUMBER.ExtendedResolution.md
@@ -7,4 +7,4 @@ Use the decimal place of the last analog counter for increased accuracy.
     This parameter is only supported on the `*-class*` and `*-const` models! See [Choosing-the-Model](../Choosing-the-Model) for details.
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.ExtendedResolution`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.ExtendedResolution`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.IgnoreLeadingNaN.md b/param-docs/parameter-pages/PostProcessing/NUMBER.IgnoreLeadingNaN.md
@@ -6,4 +6,4 @@ This is only relevant for models which use `N`!
 See [here](../Choosing-the-Model) for details.
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.IgnoreLeadingNaN`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.IgnoreLeadingNaN`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateType.md b/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateType.md
@@ -5,4 +5,4 @@ Defines if the **Change Rate** is calculated as the difference between the last
 as the difference normalized to the interval (`RateChange` = difference per minute).
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.MaxRateType`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.MaxRateType`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateValue.md b/param-docs/parameter-pages/PostProcessing/NUMBER.MaxRateValue.md
@@ -6,4 +6,4 @@ Maximum allowed change between two readings, if exceeded the last reading will b
 If negative rate is disallowed and no maximum rate value is set, one false high reading will lead to a period of missing measurements until the measurement reaches the previous false high reading. E.g. if the counter is at `600,00` and it's read incorrectly as` 610,00`, all measurements will be skipped until the counter reaches `610,00`. Setting the MaxRateValue to `0,05` leads to a rejection of all readings with a difference `> 0,05`, in this case `610,00`. The rejection also applies to correct readings with a difference `> 0,05`!
 
 !!! Note
-    This parameter must be prefixed with `<NUMBER>` followed by a dot (eg. `main.MaxRateValue`). `<NUMBER>` is the name of the number sequence  defined in the ROI's.
+    If you edit the config file manually, you must prefix this parameter with `<NUMBER>` followed by a dot (eg. `main.MaxRateValue`). The reason is that this parameter is specific for each `<NUMBER>` (`<NUMBER>` is the name of the number sequence defined in the ROI's).
diff --git a/sd-card/config/ana-cont_1500_s2_q.tflite b/sd-card/config/ana-cont_1500_s2_q.tflite
diff --git a/sd-card/config/config.ini b/sd-card/config/config.ini
@@ -43,7 +43,7 @@ AlignmentAlgo = default
 /config/ref1.jpg 442 142
 
 [Digits]
-Model = /config/dig-cont_0712_s3_q.tflite
+Model = /config/dig-cont_0900_s3_q.tflite
 CNNGoodThreshold = 0.5
 ;ROIImagesLocation = /log/digit
 ;ROIImagesRetention = 3
@@ -52,7 +52,7 @@ main.dig2 343 126 30 54 false
 main.dig3 391 126 30 54 false
 
 [Analog]
-Model = /config/ana-cont_1300_s2.tflite
+Model = /config/ana-cont_1500_s2_q.tflite
 CNNGoodThreshold = 0.5
 ;ROIImagesLocation = /log/analog
 ;ROIImagesRetention = 3
diff --git a/sd-card/config/dig-class100-0180-s2-q.tflite b/sd-card/config/dig-class100-0180-s2-q.tflite
diff --git a/sd-card/config/dig-cont_0900_s3_q.tflite b/sd-card/config/dig-cont_0900_s3_q.tflite

Original file line number	Diff line number	Diff line change
`@@ -85,7 +85,7 @@ bool MQTTPublish(std::string _key, std::string _content, int qos, bool retained_`
`85`	`85`	`_content.append("..");`
`86`	`86`	`}`
`87`	`87`
`88`		`- LogFile.WriteToFile(ESP_LOG_DEBUG, TAG, "Published topic: " + _key + ", content: " + _content + " (msg_id=" + std::to_string(msg_id) + ")");`
	`88`	`+ LogFile.WriteToFile(ESP_LOG_DEBUG, TAG, "Published topic: " + _key + ", content: " + _content);`
`89`	`89`	`return true;`
`90`	`90`	`}`
`91`	`91`	`else {`
`@@ -465,7 +465,7 @@ void MQTTconnected(){`
`465`	`465`	`if (subscribeFunktionMap != NULL) {`
`466`	`466`	`for(std::map<std::string, std::function<bool(std::string, char*, int)>>::iterator it = subscribeFunktionMap->begin(); it != subscribeFunktionMap->end(); ++it) {`
`467`	`467`	`int msg_id = esp_mqtt_client_subscribe(client, it->first.c_str(), 0);`
`468`		`- LogFile.WriteToFile(ESP_LOG_DEBUG, TAG, "topic " + it->first + " subscribe successful, msg_id=" + std::to_string(msg_id));`
	`468`	`+ LogFile.WriteToFile(ESP_LOG_DEBUG, TAG, "topic " + it->first + " subscribe successful");`
`469`	`469`	`}`
`470`	`470`	`}`
`471`	`471`