SWDIO label on silkscreen should be on CN4 pin 13

[JanDupal]

Hi,

this repo saved me quite a lot of time after I bought the board (V1). But I've found out that both V1 and V2 boards have bug on silkscreen – for SWD to function properly, you need two things:

1. Bridge BD1 and BD2 with resistor (V2 has built-in jumper for that, V1 doesn't = you need to do that manually).
2. Connect ARM's (or whatever device are you connecting to via JTAG) SWDIO pin to FT2232HL's pin BD2 (or AD2 if you're using the other half of FT2232HL).

However labels on PCB suggest that SWDIO from processor should be connected to connector CN4 pin 7 = BD3 (on V1) or connector CN4 pin = BD1 (on V2).

Could you please note that bug via warning to PDF schematics?