Merge branch 'Aircoookie:master' into master

Author: awawa-dev

usermods/rgb-rotary-encoder/rgb-rotary-encoder.h

@@ -40,7 +40,7 @@ class RgbRotaryEncoderUsermod : public Usermod
     void initRotaryEncoder()
     {
       PinManagerPinType pins[2] = { { eaIo, false }, { ebIo, false } };
-      if (!pinManager.allocateMultiplePins(pins, 2, UM_RGBRotaryEncoder)) {
+      if (!pinManager.allocateMultiplePins(pins, 2, PinOwner::UM_RGBRotaryEncoder)) {
         eaIo = -1;
         ebIo = -1;
         cleanup();
@@ -208,7 +208,7 @@ class RgbRotaryEncoderUsermod : public Usermod
         lastKnownBri = bri;
 
         updateLeds();
-        colorUpdated(NOTIFIER_CALL_MODE_DIRECT_CHANGE);
+        colorUpdated(CALL_MODE_DIRECT_CHANGE);
       }
 
       // If the brightness is changed not with the rotary, update the rotary
@@ -323,7 +323,7 @@ class RgbRotaryEncoderUsermod : public Usermod
       */
     uint16_t getId()
     {
-      return 0x4711;
+      return USERMOD_RGB_ROTARY_ENCODER;
     }
 
     //More methods can be added in the future, this example will then be extended.

wled00/const.h

@@ -62,6 +62,7 @@
 #define USERMOD_ID_PWM_FAN               19     //Usermod "usermod_PWM_fan.h"
 #define USERMOD_ID_BH1750                20     //Usermod "usermod_bh1750.h"
 #define USERMOD_ID_SEVEN_SEGMENT_DISPLAY 21     //Usermod "usermod_v2_seven_segment_display.h"
+#define USERMOD_RGB_ROTARY_ENCODER       22     //Usermod "rgb-rotary-encoder.h"
 
 //Access point behavior
 #define AP_BEHAVIOR_BOOT_NO_CONN          0     //Open AP when no connection after boot

wled00/pin_manager.h

@@ -36,7 +36,6 @@ enum struct PinOwner : uint8_t {
   DMX           = 0x8A,   // 'DMX'  == hard-coded to IO2
   // Use UserMod IDs from const.h here
   UM_Unspecified       = USERMOD_ID_UNSPECIFIED,        // 0x01
-  UM_RGBRotaryEncoder  = USERMOD_ID_UNSPECIFIED,        // 0x01 // No define in const.h for this user module -- consider adding?
   UM_Example           = USERMOD_ID_EXAMPLE,            // 0x02 // Usermod "usermod_v2_example.h"
   UM_Temperature       = USERMOD_ID_TEMPERATURE,        // 0x03 // Usermod "usermod_temperature.h"
   // #define USERMOD_ID_FIXNETSERVICES                  // 0x04 // Usermod "usermod_Fix_unreachable_netservices.h" -- Does not allocate pins
@@ -53,6 +52,7 @@ enum struct PinOwner : uint8_t {
   // #define USERMOD_ID_RTC                             // 0x0F // Usermod "usermod_rtc.h" -- Uses "standard" I2C pins ... TODO -- enable shared I2C bus use
   // #define USERMOD_ID_ELEKSTUBE_IPS                   // 0x10 // Usermod "usermod_elekstube_ips.h" -- Uses quite a few pins ... see Hardware.h and User_Setup.h
   // #define USERMOD_ID_SN_PHOTORESISTOR                // 0x11 // Usermod "usermod_sn_photoresistor.h" -- Uses hard-coded pin (PHOTORESISTOR_PIN == A0), but could be easily updated to use pinManager
+  UM_RGBRotaryEncoder  = USERMOD_RGB_ROTARY_ENCODER     // 0x16 // Usermod "rgb-rotary-encoder.h"
 };
 static_assert(0u == static_cast<uint8_t>(PinOwner::None), "PinOwner::None must be zero, so default array initialization works as expected");