docs(client-elasticache): Renaming full service name as it appears in developer documentation.

Author: awstools

clients/client-elasticache/src/commands/AddTagsToResourceCommand.ts

@@ -97,7 +97,7 @@ export interface AddTagsToResourceCommandOutput extends TagListMessage, __Metada
  *  <p>The requested replication group is not in the <code>available</code> state.</p>
  *
  * @throws {@link InvalidServerlessCacheSnapshotStateFault} (client fault)
- *  <p>The state of the serverless cache snapshot was not received. Available for Redis only.</p>
+ *  <p>The state of the serverless cache snapshot was not received. Available for Redis OSS and Serverless Memcached only.</p>
  *
  * @throws {@link InvalidServerlessCacheStateFault} (client fault)
  *  <p>The account for these credentials is not currently active.</p>
@@ -112,7 +112,7 @@ export interface AddTagsToResourceCommandOutput extends TagListMessage, __Metada
  *  <p>The serverless cache was not found or does not exist.</p>
  *
  * @throws {@link ServerlessCacheSnapshotNotFoundFault} (client fault)
- *  <p>This serverless cache snapshot could not be found or does not exist. Available for Redis only.</p>
+ *  <p>This serverless cache snapshot could not be found or does not exist. Available for Redis OSS and Serverless Memcached only.</p>
  *
  * @throws {@link SnapshotNotFoundFault} (client fault)
  *  <p>The requested snapshot name does not refer to an existing snapshot.</p>

clients/client-elasticache/src/commands/CopyServerlessCacheSnapshotCommand.ts

@@ -30,7 +30,7 @@ export interface CopyServerlessCacheSnapshotCommandOutput
     __MetadataBearer {}
 
 /**
- * <p>Creates a copy of an existing serverless cache’s snapshot. Available for Redis only.</p>
+ * <p>Creates a copy of an existing serverless cache’s snapshot. Available for Redis OSS and Serverless Memcached only.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -83,16 +83,16 @@ export interface CopyServerlessCacheSnapshotCommandOutput
  *  <p>The value for a parameter is invalid.</p>
  *
  * @throws {@link InvalidServerlessCacheSnapshotStateFault} (client fault)
- *  <p>The state of the serverless cache snapshot was not received. Available for Redis only.</p>
+ *  <p>The state of the serverless cache snapshot was not received. Available for Redis OSS and Serverless Memcached only.</p>
  *
  * @throws {@link ServerlessCacheSnapshotAlreadyExistsFault} (client fault)
- *  <p>A serverless cache snapshot with this name already exists. Available for Redis only.</p>
+ *  <p>A serverless cache snapshot with this name already exists. Available for Redis OSS and Serverless Memcached only.</p>
  *
  * @throws {@link ServerlessCacheSnapshotNotFoundFault} (client fault)
- *  <p>This serverless cache snapshot could not be found or does not exist. Available for Redis only.</p>
+ *  <p>This serverless cache snapshot could not be found or does not exist. Available for Redis OSS and Serverless Memcached only.</p>
  *
  * @throws {@link ServerlessCacheSnapshotQuotaExceededFault} (client fault)
- *  <p>The number of serverless cache snapshots exceeds the customer snapshot quota. Available for Redis only.</p>
+ *  <p>The number of serverless cache snapshots exceeds the customer snapshot quota. Available for Redis OSS and Serverless Memcached only.</p>
  *
  * @throws {@link ServiceLinkedRoleNotFoundFault} (client fault)
  *  <p>The specified service linked role (SLR) was not found.</p>

clients/client-elasticache/src/commands/CopySnapshotCommand.ts

@@ -30,7 +30,7 @@ export interface CopySnapshotCommandOutput extends CopySnapshotResult, __Metadat
 /**
  * <p>Makes a copy of an existing snapshot.</p>
  *          <note>
- *             <p>This operation is valid for Redis only.</p>
+ *             <p>This operation is valid for Redis OSS only.</p>
  *          </note>
  *          <important>
  *             <p>Users or groups that have permissions to use the <code>CopySnapshot</code>

clients/client-elasticache/src/commands/CreateCacheClusterCommand.ts

@@ -29,8 +29,8 @@ export interface CreateCacheClusterCommandOutput extends CreateCacheClusterResul
 
 /**
  * <p>Creates a cluster. All nodes in the cluster run the same protocol-compliant cache
- *             engine software, either Memcached or Redis.</p>
- *          <p>This operation is not supported for Redis (cluster mode enabled) clusters.</p>
+ *             engine software, either Memcached or Redis OSS.</p>
+ *          <p>This operation is not supported for Redis OSS (cluster mode enabled) clusters.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

clients/client-elasticache/src/commands/CreateGlobalReplicationGroupCommand.ts

@@ -30,9 +30,9 @@ export interface CreateGlobalReplicationGroupCommandOutput
     __MetadataBearer {}
 
 /**
- * <p>Global Datastore for Redis offers fully managed, fast, reliable and secure
- *             cross-region replication. Using Global Datastore for Redis, you can create cross-region
- *             read replica clusters for ElastiCache for Redis to enable low-latency reads and disaster
+ * <p>Global Datastore for Redis OSS offers fully managed, fast, reliable and secure
+ *             cross-region replication. Using Global Datastore for Redis OSS, you can create cross-region
+ *             read replica clusters for ElastiCache (Redis OSS) to enable low-latency reads and disaster
  *             recovery across regions. For more information, see <a href="https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Redis-Global-Datastore.html">Replication
  *                 Across Regions Using Global Datastore</a>. </p>
  *          <ul>

clients/client-elasticache/src/commands/CreateReplicationGroupCommand.ts

@@ -28,18 +28,18 @@ export interface CreateReplicationGroupCommandInput extends CreateReplicationGro
 export interface CreateReplicationGroupCommandOutput extends CreateReplicationGroupResult, __MetadataBearer {}
 
 /**
- * <p>Creates a Redis (cluster mode disabled) or a Redis (cluster mode enabled) replication
+ * <p>Creates a Redis OSS (cluster mode disabled) or a Redis OSS (cluster mode enabled) replication
  *             group.</p>
  *          <p>This API can be used to create a standalone regional replication group or a secondary
  *             replication group associated with a Global datastore.</p>
- *          <p>A Redis (cluster mode disabled) replication group is a collection of nodes, where
+ *          <p>A Redis OSS (cluster mode disabled) replication group is a collection of nodes, where
  *             one of the nodes is a read/write primary and the others are read-only replicas.
  *             Writes to the primary are asynchronously propagated to the replicas.</p>
- *          <p>A Redis cluster-mode enabled cluster is comprised of from 1 to 90 shards (API/CLI:
+ *          <p>A Redis OSS cluster-mode enabled cluster is comprised of from 1 to 90 shards (API/CLI:
  *             node groups). Each shard has a primary node and up to 5 read-only replica nodes. The
  *             configuration can range from 90 shards and 0 replicas to 15 shards and 5 replicas, which
  *             is the maximum number or replicas allowed. </p>
- *          <p>The node or shard limit can be increased to a maximum of 500 per cluster if the Redis
+ *          <p>The node or shard limit can be increased to a maximum of 500 per cluster if the Redis OSS
  *             engine version is 5.0.6 or higher. For example, you can choose to configure a 500 node
  *             cluster that ranges between 83 shards (one primary and 5 replicas per shard) and 500
  *             shards (single primary and no replicas). Make sure there are enough available IP
@@ -50,14 +50,14 @@ export interface CreateReplicationGroupCommandOutput extends CreateReplicationGr
  *          <p>To request a limit increase, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html">Amazon Service Limits</a> and
  *             choose the limit type <b>Nodes per cluster per instance
  *                 type</b>. </p>
- *          <p>When a Redis (cluster mode disabled) replication group has been successfully created,
+ *          <p>When a Redis OSS (cluster mode disabled) replication group has been successfully created,
  *             you can add one or more read replicas to it, up to a total of 5 read replicas. If you
- *             need to increase or decrease the number of node groups (console: shards), you can avail
- *             yourself of ElastiCache for Redis' scaling. For more information, see <a href="https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Scaling.html">Scaling
- *                 ElastiCache for Redis Clusters</a> in the <i>ElastiCache User
+ *             need to increase or decrease the number of node groups (console: shards), you can use ElastiCache (Redis OSS) scaling.
+ *             For more information, see <a href="https://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Scaling.html">Scaling
+ *                 ElastiCache (Redis OSS) Clusters</a> in the <i>ElastiCache User
  *                 Guide</i>.</p>
  *          <note>
- *             <p>This operation is valid for Redis only.</p>
+ *             <p>This operation is valid for Redis OSS only.</p>
  *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

clients/client-elasticache/src/commands/CreateServerlessCacheSnapshotCommand.ts

@@ -33,7 +33,7 @@ export interface CreateServerlessCacheSnapshotCommandOutput
     __MetadataBearer {}
 
 /**
- * <p>This API creates a copy of an entire ServerlessCache at a specific moment in time. Available for Redis only.</p>
+ * <p>This API creates a copy of an entire ServerlessCache at a specific moment in time. Available for Redis OSS and Serverless Memcached only.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -92,10 +92,10 @@ export interface CreateServerlessCacheSnapshotCommandOutput
  *  <p>The serverless cache was not found or does not exist.</p>
  *
  * @throws {@link ServerlessCacheSnapshotAlreadyExistsFault} (client fault)
- *  <p>A serverless cache snapshot with this name already exists. Available for Redis only.</p>
+ *  <p>A serverless cache snapshot with this name already exists. Available for Redis OSS and Serverless Memcached only.</p>
  *
  * @throws {@link ServerlessCacheSnapshotQuotaExceededFault} (client fault)
- *  <p>The number of serverless cache snapshots exceeds the customer snapshot quota. Available for Redis only.</p>
+ *  <p>The number of serverless cache snapshots exceeds the customer snapshot quota. Available for Redis OSS and Serverless Memcached only.</p>
  *
  * @throws {@link ServiceLinkedRoleNotFoundFault} (client fault)
  *  <p>The specified service linked role (SLR) was not found.</p>

clients/client-elasticache/src/commands/CreateSnapshotCommand.ts

@@ -31,7 +31,7 @@ export interface CreateSnapshotCommandOutput extends CreateSnapshotResult, __Met
  * <p>Creates a copy of an entire cluster or replication group at a specific moment in
  *             time.</p>
  *          <note>
- *             <p>This operation is valid for Redis only.</p>
+ *             <p>This operation is valid for Redis OSS only.</p>
  *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -141,12 +141,12 @@ export interface CreateSnapshotCommandOutput extends CreateSnapshotResult, __Met
  *  <p>You attempted one of the following operations:</p>
  *          <ul>
  *             <li>
- *                <p>Creating a snapshot of a Redis cluster running on a
+ *                <p>Creating a snapshot of a Redis OSS cluster running on a
  *                         <code>cache.t1.micro</code> cache node.</p>
  *             </li>
  *             <li>
  *                <p>Creating a snapshot of a cluster that is running Memcached rather than
- *                     Redis.</p>
+ *                     Redis OSS.</p>
  *             </li>
  *          </ul>
  *          <p>Neither of these are supported by ElastiCache.</p>

clients/client-elasticache/src/commands/CreateUserCommand.ts

@@ -28,7 +28,7 @@ export interface CreateUserCommandInput extends CreateUserMessage {}
 export interface CreateUserCommandOutput extends User, __MetadataBearer {}
 
 /**
- * <p>For Redis engine version 6.0 onwards: Creates a Redis user. For more information, see
+ * <p>For Redis OSS engine version 6.0 onwards: Creates a Redis OSS user. For more information, see
  *                 <a href="http://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Clusters.RBAC.html">Using Role Based Access Control (RBAC)</a>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

clients/client-elasticache/src/commands/CreateUserGroupCommand.ts

@@ -28,7 +28,7 @@ export interface CreateUserGroupCommandInput extends CreateUserGroupMessage {}
 export interface CreateUserGroupCommandOutput extends UserGroup, __MetadataBearer {}
 
 /**
- * <p>For Redis engine version 6.0 onwards: Creates a Redis user group. For more
+ * <p>For Redis OSS engine version 6.0 onwards: Creates a Redis OSS user group. For more
  *             information, see <a href="http://docs.aws.amazon.com/AmazonElastiCache/latest/red-ug/Clusters.RBAC.html">Using Role Based Access Control (RBAC)</a>
  *          </p>
  * @example