Skip to content

Latest commit

 

History

History
236 lines (175 loc) · 10.1 KB

getting-started.md

File metadata and controls

236 lines (175 loc) · 10.1 KB

Getting Started With the SOCI Snapshotter

This document walks through how to use the SOCI snapshotter, including building a SOCI index, pushing/pulling an image and associated SOCI index, and running a container with the SOCI snapshotter.

Dependencies

The SOCI snapshotter has the following runtime dependencies. Please follow the links or commands to install them on your machine:

Note We only mention the direct dependencies of the project. Some dependencies may have their own dependencies (e.g., containerd depends on runc/cni). Please refer to their doc for a complete installation guide (mainly containerd).

  • containerd >= 1.4 - required to run the SOCI snapshotter; to confirm please check with sudo nerdctl system info.
  • nerdctl >= v1.6.0 - required for this doc to interact with containerd/registry. You do not need any of the additional components mentioned in the install documentation for this getting started, but you might if you want complex networking in the future. Please note that SOCI will not work with rootless nerdctl.
  • fuse - used for mounting without root access (sudo yum install fuse or other Linux package manager like apt-get, depending on your Linux distro).

Install the SOCI snapshotter

The SOCI project produces 2 binaries:

  • soci: the CLI tool used to build/manage SOCI indices.
  • soci-snapshotter-grpc: the daemon (a containerd snapshotter plugin) used for lazy loading.

You can download prebuilt binaries from our release page or build them from source.

In this doc, let's just download the release binaries and move them to a PATH directory (/usr/local/bin):

You can find other download link in the release page that matches your machine.

version="0.12.1"
wget https://github.com/awslabs/soci-snapshotter/releases/download/v${version}/soci-snapshotter-${version}-linux-amd64.tar.gz
sudo tar -C /usr/local/bin -xvf soci-snapshotter-${version}-linux-amd64.tar.gz soci soci-snapshotter-grpc

Now you should be able to use the soci CLI (and soci-snapshotter-grpc containerd plugin shortly):

# check soci can be found in PATH
sudo soci --help

Many soci CLI commands need to be run as sudo, because the metadata is saved in directories that a non-root user often does not have access to.

Push an image to your registry

In this document we will use rabbitmq from DockerHub docker.io/library/rabbitmq:latest. We use AWS ECR as the public registry for demonstration. Use of other registries is possible but please note that not all of the widely used container registries are soci compatible - please check the registry compatibility list to ensure that the registry you wish to work with is compatible.

First let's pull the image from docker into containerd's data store, then (tag and) push it up to your registry:

The example assumes you have created an ECR repository called rabbitmq and have credentials available to the AWS CLI. You just need to update AWS_ACCOUNT and AWS_REGION.

If you are using a different registry, you will need to set REGISTRY and REGISTRY_USER/REGISTRY_PASSWORD appropriately (and the rabbitmq repository is created or can be created automatically while pushing).

The platform tag might be different depending on your machine.

export AWS_ACCOUNT=000000000000
export AWS_REGION=us-east-1
export REGISTRY_USER=AWS
export REGISTRY_PASSWORD=$(aws ecr get-login-password --region $AWS_REGION)
export REGISTRY=$AWS_ACCOUNT.dkr.ecr.$AWS_REGION.amazonaws.com
# needed for pushing images / SOCI indexes which run as the current user
echo $REGISTRY_PASSWORD | nerdctl login -u $REGISTRY_USER --password-stdin $REGISTRY
# needed the SOCI snapshotter which runs as root
echo $REGISTRY_PASSWORD | sudo nerdctl login -u $REGISTRY_USER --password-stdin $REGISTRY
sudo nerdctl pull docker.io/library/rabbitmq:latest
sudo soci convert docker.io/library/rabbitmq:latest $REGISTRY/rabbitmq:latest
sudo nerdctl push $REGISTRY/rabbitmq:latest

After this step, please check your registry to confirm the image and SOCI index are present. You can go to your registry console or use your registry's CLI (e.g. for ECR, you can use aws ecr describe-images --repository-name rabbitmq --region $AWS_REGION).

About the SOCI index

Behind the scene SOCI created two kinds of objects. One is a series of ztocs (one per layer). A ztoc is a table of contents for compressed data. The other is a manifest that relates the ztocs to their corresponding image layers and relates the entire SOCI index to a particular image manifest (i.e. a particular image for a particular platform).

We skip building ztocs for smaller layers (controlled by --min-layer-size in soci convert) because small layers don't benefit much from lazy loading.)

When all layers are smaller than min-layer-size, soci CLI would fail.

From the above output, we can see that SOCI creates ztocs for 3 layers and skips 7 layers, which means only the 3 layers with ztocs will be lazily pulled.

(Optional) Inspect SOCI index and zTOC

We can inspect one of these ztocs from the output of previous command (replace the digest with one in your command output). This command will print the ztoc, which contains all of the information that SOCI needs to find a given file in the layer:

sudo soci ztoc info sha256:4c1d63f476d4907e0db42b8736f578e79432a28d304935708c918c95e0e4df00

We can also view the SOCI index manifests. This command list out all of our index manifests:

sudo soci index list

To inspect an individual SOCI index, we can use the following command, which dump out the index manifest in json:

sudo soci index info sha256:f5f2a8558d0036c0a316638c5575607c01d1fa1588dbe56c6a5a7253e30ce107

Run container with the SOCI snapshotter

Configure containerd

We need to reconfigure and restart containerd to enable the SOCI snapshotter. This section assume your containerd is managed by systemd. First let's stop containerd:

sudo systemctl stop containerd

Next we need to modify containerd's config file (/etc/containerd/config.toml). Let's add the following config to the file to enable the SOCI snapshotter as a plugin:

[proxy_plugins]
  [proxy_plugins.soci]
    type = "snapshot"
    address = "/run/soci-snapshotter-grpc/soci-snapshotter-grpc.sock"

This config section tells containerd that there is a snapshot plugin named soci and to communicate with it via a socket file.

Now let's restart containerd and confirm containerd knows about the SOCI snapshotter plugin:

sudo systemctl restart containerd
sudo nerdctl system info

You should see soci under Server -> Plugins -> Storage

Start the SOCI snapshotter

First we need to start the snapshotter grpc service by running the soci-snapshotter-grpc binary in background and simply redirecting logs to an arbitrary file:

sudo soci-snapshotter-grpc &> ~/soci-snapshotter-logs &

Alternately, you can split up stdout (json logs) and stderr (plain text errors):

sudo soci-snapshotter-grpc 2> ~/soci-snapshotter-errors 1> ~/soci-snapshotter-logs &

Lazily pull image

Once the snapshotter is running we can call the pull command from nerdctl. This command reads the manifest from the registry and mounts a FUSE filesystem for each layer.

sudo nerdctl pull --snapshotter soci $REGISTRY/rabbitmq:latest

#output
$Registry/rabbitmq:latest:   resolved       |++++++++++++++++++++++++++++++++++++++|
manifest-sha256:a9072496...: done           |++++++++++++++++++++++++++++++++++++++|
config-sha256:4027609f...:   done           |++++++++++++++++++++++++++++++++++++++|
elapsed: 9.8 s               total:  10.3 K (1.1 KiB/s)

After running this command you will see a minimal output as the example, because with lazy pulling, not all layers are pulled during the pull step. From previous step we created 3 ztocs for 3 layers.

Now let's check the mounts for the FUSE filesystems. There should be one mount per layer for layers with ztoc. In our rabbitmq example, there should be 3 mounts.

mount | grep fuse

# output
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/home/ec2-user/code/soci-snapshotter/soci on /var/lib/soci-snapshotter-grpc/snapshotter/snapshots/57/fs type fuse.rawBridge (rw,nodev,relatime,user_id=0,group_id=0,allow_other)
/home/ec2-user/code/soci-snapshotter/soci on /var/lib/soci-snapshotter-grpc/snapshotter/snapshots/60/fs type fuse.rawBridge (rw,nodev,relatime,user_id=0,group_id=0,allow_other)
/home/ec2-user/code/soci-snapshotter/soci on /var/lib/soci-snapshotter-grpc/snapshotter/snapshots/62/fs type fuse.rawBridge (rw,nodev,relatime,user_id=0,group_id=0,allow_other)

Run container

Now that all of the mounts are set up we can run the image using the following command in nerdctl. We need to specify which snapshotter we shall use and we will use the --net host flag. Then we pass in the two main arguments, our image registry and the id of the container:

sudo nerdctl run --snapshotter soci --net host --rm $REGISTRY/rabbitmq:latest