[Az.EdgeOrder] Update generation tool version: autorest.powershell v3->v4 (Azure#27635)

Author: lijinpei2008

src/EdgeOrder/EdgeOrder.Autorest/Properties/AssemblyInfo.cs

@@ -0,0 +1,26 @@
+// Copyright (c) Microsoft Corporation. All rights reserved.
+// Licensed under the Apache License, Version 2.0 (the ""License"");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+// http://www.apache.org/licenses/LICENSE-2.0
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an ""AS IS"" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
+// is regenerated.
+
+using System;
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+[assembly: System.Reflection.AssemblyCompanyAttribute("Microsoft")]
+[assembly: System.Reflection.AssemblyCopyrightAttribute("Copyright © Microsoft")]
+[assembly: System.Reflection.AssemblyProductAttribute("Microsoft Azure PowerShell")]
+[assembly: System.Reflection.AssemblyTitleAttribute("Microsoft Azure PowerShell - EdgeOrder")]
+[assembly: System.Reflection.AssemblyFileVersionAttribute("0.1.2")]
+[assembly: System.Reflection.AssemblyVersionAttribute("0.1.2")]
+[assembly: System.Runtime.InteropServices.ComVisibleAttribute(false)]
+[assembly: System.CLSCompliantAttribute(false)]

src/EdgeOrder/EdgeOrder.Autorest/README.md

@@ -45,21 +45,16 @@ title: EdgeOrder
 subject-prefix: $(service-name)
 inlining-threshold: 50
 
-# If there are post APIs for some kinds of actions in the RP, you may need to 
-# uncomment following line to support viaIdentity for these post APIs
-# identity-correction-for-post: true
-
-# For new modules, please avoid setting 3.x using the use-extension method and instead, use 4.x as the default option
-use-extension:
-  "@autorest/powershell": "3.x"
-
 directive:
   # Following is two common directive which are normally required in all the RPs
   # 1. Remove the unexpanded parameter set
   # 2. For New-* cmdlets, ViaIdentity is not required, so CreateViaIdentityExpanded is removed as well
   #^Update$|^UpdateViaIdentity$|^UpdateViaIdentityExpanded$|
   - where:
-      variant: ^Create$|^CreateViaIdentity$|^CreateViaIdentityExpanded$|^GetViaIdentity$|^Validate.*$|^Update$|^UpdateViaIdentity$|^CancelViaIdentity$|^Cancel$|^Return$|^ReturnViaIdentity$
+      variant: ^(Create|Update|Cance|Return)(?!.*?(Expanded|JsonFilePath|JsonString))
+    remove: true
+  - where:
+      variant: ^CreateViaIdentity$|^CreateViaIdentityExpanded$|^GetViaIdentity$|^Validate.*$
     remove: true
   # Remove the set-* cmdlet
   - where:
@@ -104,12 +99,18 @@ directive:
       subject: OrderItemCancellation
 
   - model-cmdlet:
-    - OrderItemDetails
-    - ShippingAddress
-    - ContactDetails
-    - Preferences
-    - HierarchyInformation
-    - FilterableProperty
+      - model-name: OrderItemDetails
+        cmdlet-name: New-AzEdgeOrderOrderItemDetailsObject
+      - model-name: ShippingAddress
+        cmdlet-name: New-AzEdgeOrderShippingAddressObject
+      - model-name: ContactDetails
+        cmdlet-name: New-AzEdgeOrderContactDetailsObject
+      - model-name: Preferences
+        cmdlet-name: New-AzEdgeOrderPreferencesObject
+      - model-name: HierarchyInformation
+        cmdlet-name: New-AzEdgeOrderHierarchyInformationObject
+      - model-name: FilterableProperty
+        cmdlet-name: New-AzEdgeOrderFilterablePropertyObject
 ```
 ``` yaml
 directive:

src/EdgeOrder/EdgeOrder.Autorest/custom/autogen-model-cmdlets/New-AzEdgeOrderContactDetailsObject.ps1

@@ -21,12 +21,13 @@ Create an in-memory object for ContactDetails.
 Create an in-memory object for ContactDetails.
 
 .Outputs
-Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.ContactDetails
+Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.ContactDetails
 .Link
-https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-AzEdgeOrderContactDetailsObject
+https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-azedgeordercontactdetailsobject
 #>
 function New-AzEdgeOrderContactDetailsObject {
-    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.ContactDetails')]
+    [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.ModelCmdletAttribute()]
+    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.ContactDetails')]
     [CmdletBinding(PositionalBinding=$false)]
     Param(
 
@@ -48,7 +49,7 @@ function New-AzEdgeOrderContactDetailsObject {
     )
 
     process {
-        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.ContactDetails]::New()
+        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.ContactDetails]::New()
 
         if ($PSBoundParameters.ContainsKey('ContactName')) {
             $Object.ContactName = $ContactName

src/EdgeOrder/EdgeOrder.Autorest/custom/autogen-model-cmdlets/New-AzEdgeOrderFilterablePropertyObject.ps1

@@ -21,26 +21,27 @@ Create an in-memory object for FilterableProperty.
 Create an in-memory object for FilterableProperty.
 
 .Outputs
-Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.FilterableProperty
+Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.FilterableProperty
 .Link
-https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-AzEdgeOrderFilterablePropertyObject
+https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-azedgeorderfilterablepropertyobject
 #>
 function New-AzEdgeOrderFilterablePropertyObject {
-    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.FilterableProperty')]
+    [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.ModelCmdletAttribute()]
+    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.FilterableProperty')]
     [CmdletBinding(PositionalBinding=$false)]
     Param(
 
         [Parameter(Mandatory, HelpMessage="Values to be filtered.")]
         [string[]]
         $SupportedValue,
         [Parameter(Mandatory, HelpMessage="Type of product filter.")]
-        [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Support.SupportedFilterTypes])]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Support.SupportedFilterTypes]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.PSArgumentCompleterAttribute("ShipToCountries", "DoubleEncryptionStatus")]
+        [string]
         $Type
     )
 
     process {
-        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.FilterableProperty]::New()
+        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.FilterableProperty]::New()
 
         if ($PSBoundParameters.ContainsKey('SupportedValue')) {
             $Object.SupportedValue = $SupportedValue

src/EdgeOrder/EdgeOrder.Autorest/custom/autogen-model-cmdlets/New-AzEdgeOrderHierarchyInformationObject.ps1

@@ -21,12 +21,13 @@ Create an in-memory object for HierarchyInformation.
 Create an in-memory object for HierarchyInformation.
 
 .Outputs
-Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.HierarchyInformation
+Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.HierarchyInformation
 .Link
-https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-AzEdgeOrderHierarchyInformationObject
+https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-azedgeorderhierarchyinformationobject
 #>
 function New-AzEdgeOrderHierarchyInformationObject {
-    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.HierarchyInformation')]
+    [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.ModelCmdletAttribute()]
+    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.HierarchyInformation')]
     [CmdletBinding(PositionalBinding=$false)]
     Param(
 
@@ -45,7 +46,7 @@ function New-AzEdgeOrderHierarchyInformationObject {
     )
 
     process {
-        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.HierarchyInformation]::New()
+        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.HierarchyInformation]::New()
 
         if ($PSBoundParameters.ContainsKey('ConfigurationName')) {
             $Object.ConfigurationName = $ConfigurationName

src/EdgeOrder/EdgeOrder.Autorest/custom/autogen-model-cmdlets/New-AzEdgeOrderOrderItemDetailsObject.ps1

@@ -21,32 +21,33 @@ Create an in-memory object for OrderItemDetails.
 Create an in-memory object for OrderItemDetails.
 
 .Outputs
-Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.OrderItemDetails
+Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.OrderItemDetails
 .Link
-https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-AzEdgeOrderOrderItemDetailsObject
+https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-azedgeorderorderitemdetailsobject
 #>
 function New-AzEdgeOrderOrderItemDetailsObject {
-    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.OrderItemDetails')]
+    [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.ModelCmdletAttribute()]
+    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.OrderItemDetails')]
     [CmdletBinding(PositionalBinding=$false)]
     Param(
 
         [Parameter(HelpMessage="Additional notification email list.")]
         [string[]]
         $NotificationEmailList,
         [Parameter(Mandatory, HelpMessage="Order item type.")]
-        [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Support.OrderItemType])]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Support.OrderItemType]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.PSArgumentCompleterAttribute("Purchase", "Rental")]
+        [string]
         $OrderItemType,
         [Parameter(HelpMessage="Customer notification Preferences.")]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.IPreferences]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.IPreferences]
         $Preference,
         [Parameter(Mandatory, HelpMessage="Unique identifier for configuration.")]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.IProductDetails]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.IProductDetails]
         $ProductDetail
     )
 
     process {
-        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.OrderItemDetails]::New()
+        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.OrderItemDetails]::New()
 
         if ($PSBoundParameters.ContainsKey('NotificationEmailList')) {
             $Object.NotificationEmailList = $NotificationEmailList

src/EdgeOrder/EdgeOrder.Autorest/custom/autogen-model-cmdlets/New-AzEdgeOrderPreferencesObject.ps1

@@ -21,31 +21,32 @@ Create an in-memory object for Preferences.
 Create an in-memory object for Preferences.
 
 .Outputs
-Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.Preferences
+Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Preferences
 .Link
-https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-AzEdgeOrderPreferencesObject
+https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-azedgeorderpreferencesobject
 #>
 function New-AzEdgeOrderPreferencesObject {
-    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.Preferences')]
+    [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.ModelCmdletAttribute()]
+    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Preferences')]
     [CmdletBinding(PositionalBinding=$false)]
     Param(
 
         [Parameter(HelpMessage="Preferences related to the Encryption.")]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.IEncryptionPreferences]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.IEncryptionPreferences]
         $EncryptionPreference,
         [Parameter(HelpMessage="Preferences related to the Management resource.")]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.IManagementResourcePreferences]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.IManagementResourcePreferences]
         $ManagementResourcePreference,
         [Parameter(HelpMessage="Notification preferences.")]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.INotificationPreference[]]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.INotificationPreference[]]
         $NotificationPreference,
         [Parameter(HelpMessage="Preferences related to the shipment logistics of the order.")]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.ITransportPreferences]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.ITransportPreferences]
         $TransportPreference
     )
 
     process {
-        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.Preferences]::New()
+        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Preferences]::New()
 
         if ($PSBoundParameters.ContainsKey('EncryptionPreference')) {
             $Object.EncryptionPreference = $EncryptionPreference

src/EdgeOrder/EdgeOrder.Autorest/custom/autogen-model-cmdlets/New-AzEdgeOrderShippingAddressObject.ps1

@@ -21,18 +21,19 @@ Create an in-memory object for ShippingAddress.
 Create an in-memory object for ShippingAddress.
 
 .Outputs
-Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.ShippingAddress
+Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.ShippingAddress
 .Link
-https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-AzEdgeOrderShippingAddressObject
+https://learn.microsoft.com/powershell/module/Az.EdgeOrder/new-azedgeordershippingaddressobject
 #>
 function New-AzEdgeOrderShippingAddressObject {
-    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.ShippingAddress')]
+    [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.ModelCmdletAttribute()]
+    [OutputType('Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.ShippingAddress')]
     [CmdletBinding(PositionalBinding=$false)]
     Param(
 
         [Parameter(HelpMessage="Type of address.")]
-        [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Support.AddressType])]
-        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Support.AddressType]
+        [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.PSArgumentCompleterAttribute("None", "Residential", "Commercial")]
+        [string]
         $AddressType,
         [Parameter(HelpMessage="Name of the City.")]
         [string]
@@ -64,7 +65,7 @@ function New-AzEdgeOrderShippingAddressObject {
     )
 
     process {
-        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.ShippingAddress]::New()
+        $Object = [Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.ShippingAddress]::New()
 
         if ($PSBoundParameters.ContainsKey('AddressType')) {
             $Object.AddressType = $AddressType

src/EdgeOrder/EdgeOrder.Autorest/docs/Az.EdgeOrder.md

@@ -1,6 +1,6 @@
 ---
 Module Name: Az.EdgeOrder
-Module Guid: ffbed74a-2473-42d2-95fc-73adffd13d49
+Module Guid: b62edb67-a8ef-4473-b452-8e344430234a
 Download Help Link: https://learn.microsoft.com/powershell/module/az.edgeorder
 Help Version: 1.0.0.0
 Locale: en-US
@@ -36,7 +36,7 @@ Cancel order item.
 Return order item.
 
 ### [New-AzEdgeOrderAddress](New-AzEdgeOrderAddress.md)
-Creates a new address with the specified parameters.
+create a new address with the specified parameters.
 Existing address can be updated with this API
 
 ### [New-AzEdgeOrderContactDetailsObject](New-AzEdgeOrderContactDetailsObject.md)
@@ -49,8 +49,8 @@ Create an in-memory object for FilterableProperty.
 Create an in-memory object for HierarchyInformation.
 
 ### [New-AzEdgeOrderItem](New-AzEdgeOrderItem.md)
-Creates an order item.
-Existing order item cannot be updated with this api and should instead be updated with the Update order item API.
+create an order item.
+Existing order item cannot be updated with this api and should instead be updated with the create order item API.
 
 ### [New-AzEdgeOrderOrderItemDetailsObject](New-AzEdgeOrderOrderItemDetailsObject.md)
 Create an in-memory object for OrderItemDetails.
@@ -68,8 +68,8 @@ Deletes an address.
 Deletes an order item.
 
 ### [Update-AzEdgeOrderAddress](Update-AzEdgeOrderAddress.md)
-Updates the properties of an existing address.
+update the properties of an existing address.
 
 ### [Update-AzEdgeOrderItem](Update-AzEdgeOrderItem.md)
-Updates the properties of an existing order item.
+update the properties of an existing order item.
 

src/EdgeOrder/EdgeOrder.Autorest/docs/Get-AzEdgeOrder.md

@@ -23,6 +23,12 @@ Get-AzEdgeOrder -Location <String> -Name <String> -ResourceGroupName <String> [-
  [-DefaultProfile <PSObject>] [<CommonParameters>]
 ```
 
+### GetViaIdentityOrder
+```
+Get-AzEdgeOrder -Location <String> -OrderInputObject <IEdgeOrderIdentity> [-DefaultProfile <PSObject>]
+ [<CommonParameters>]
+```
+
 ### List1
 ```
 Get-AzEdgeOrder -ResourceGroupName <String> [-SubscriptionId <String[]>] [-DefaultProfile <PSObject>]
@@ -78,7 +84,7 @@ The name of Azure region.
 
 ```yaml
 Type: System.String
-Parameter Sets: Get
+Parameter Sets: Get, GetViaIdentityOrder
 Aliases:
 
 Required: True
@@ -103,6 +109,21 @@ Accept pipeline input: False
 Accept wildcard characters: False
 ```
 
+### -OrderInputObject
+Identity Parameter
+
+```yaml
+Type: Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.IEdgeOrderIdentity
+Parameter Sets: GetViaIdentityOrder
+Aliases:
+
+Required: True
+Position: Named
+Default value: None
+Accept pipeline input: True (ByValue)
+Accept wildcard characters: False
+```
+
 ### -ResourceGroupName
 The name of the resource group.
 The name is case insensitive.
@@ -124,7 +145,7 @@ The ID of the target subscription.
 
 ```yaml
 Type: System.String[]
-Parameter Sets: (All)
+Parameter Sets: Get, List, List1
 Aliases:
 
 Required: False
@@ -139,9 +160,11 @@ This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable
 
 ## INPUTS
 
+### Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.IEdgeOrderIdentity
+
 ## OUTPUTS
 
-### Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.Api20211201.IOrderResource
+### Microsoft.Azure.PowerShell.Cmdlets.EdgeOrder.Models.IOrderResource
 
 ## NOTES