Changed the profile samples to use DHCP and AutoConf IP addresses

Author: skarg

zephyr/samples/profiles/b-sa/prj.conf

@@ -51,14 +51,14 @@ CONFIG_NET_UDP=y
 CONFIG_NET_SHELL=y
 CONFIG_NET_SOCKETS=y
 # Dynamic IP address
-#CONFIG_NET_DHCPV4=y
-#CONFIG_NET_IPV4_AUTO=y
-#CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=2
+CONFIG_NET_DHCPV4=y
+CONFIG_NET_IPV4_AUTO=y
+CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=2
 # Static IP address pre-configuration
-CONFIG_NET_CONFIG_SETTINGS=y
-CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
-CONFIG_NET_CONFIG_MY_IPV4_NETMASK="255.255.255.0"
-CONFIG_NET_CONFIG_MY_IPV4_GW="192.0.2.2"
+#CONFIG_NET_CONFIG_SETTINGS=y
+#CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
+#CONFIG_NET_CONFIG_MY_IPV4_NETMASK="255.255.255.0"
+#CONFIG_NET_CONFIG_MY_IPV4_GW="192.0.2.2"
 # Network debug config
 CONFIG_NET_LOG=y
 CONFIG_NET_SHELL=y

zephyr/samples/profiles/b-ss/prj.conf

@@ -51,14 +51,14 @@ CONFIG_NET_UDP=y
 CONFIG_NET_SHELL=y
 CONFIG_NET_SOCKETS=y
 # Dynamic IP address
-#CONFIG_NET_DHCPV4=y
-#CONFIG_NET_IPV4_AUTO=y
-#CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=2
+CONFIG_NET_DHCPV4=y
+CONFIG_NET_IPV4_AUTO=y
+CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=2
 # Static IP address pre-configuration
-CONFIG_NET_CONFIG_SETTINGS=y
-CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
-CONFIG_NET_CONFIG_MY_IPV4_NETMASK="255.255.255.0"
-CONFIG_NET_CONFIG_MY_IPV4_GW="192.0.2.2"
+#CONFIG_NET_CONFIG_SETTINGS=y
+#CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
+#CONFIG_NET_CONFIG_MY_IPV4_NETMASK="255.255.255.0"
+#CONFIG_NET_CONFIG_MY_IPV4_GW="192.0.2.2"
 # Network debug config
 CONFIG_NET_LOG=y
 CONFIG_NET_SHELL=y