Grafana: No data.

[n1md4]

Grafana site loads but displays no data.

Connector log:

connector  No AUTH_TOKEN device variable set. Cannot authenticate with balenaCloud

Connector container constantly restarts:

Service exited 'connector sha256:e5f06c9c72c47777851659d78654bdeff0aa77a6930f1c9bb5d86724eefb7a00'
Restarting service 'connector sha256:e5f06c9c72c47777851659d78654bdeff0aa77a6930f1c9bb5d86724eefb7a00'

[phil-d-wilson]

@n1md4 I'm really sorry, for some reason I completely missed this issue. Are you still using this, and if so, do you still have the problem?

[jgosseau]

Hi @n1md4 I'm currently having the same issue.

I've flashed the img using the online tool : https://hub.balena.io/will_philson/internetspeedtest
My RP3B+ boots, then in my Edga browser Grafana loads but the Internet Speed Test dashboard reads "No data" for every chart. What do I do wrong?

[n1md4]

I forgot about this and came back to it months later, started over and it just worked.  Not overly helpful for you I'm afraidSent from my Galaxy -------- Original message --------From: jgosseau ***@***.***> Date: 24/03/2022 14:18 (GMT+00:00) To: balenalabs-incubator/internetspeedtest ***@***.***> Cc: n1md4 ***@***.***>, Mention ***@***.***> Subject: Re: [balenalabs-incubator/internetspeedtest] Grafana: No data. (#12) Hi @n1md4 I'm currently having the same issue. I've flashed the img using the online tool : https://hub.balena.io/will_philson/internetspeedtest My RP3B+ boots, then in my Edga browser Grafana loads but the Internet Speed Test dashboard reads "No data" for every chart. What do I do wrong? —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[phil-d-wilson]

Hey @jgosseau , if you power the device off and on, does it start working? I'm wondering if there is a race condition.

Phil

[jgosseau]

@n1md4 Nop, though I did try that a lot!
I also flashed the sd cards multiple times... Unsuccessfully.
How I can get access to a shell to sort this out?

[phil-d-wilson]

@jgosseau can you leave the device online, so that I can take a look remotely?

[jgosseau]

@phil-d-wilson I started all over and finally made it, but adding it into my Balena Cloud Dashboard (which I didn't do earlier). The init process (downloading packages, etc.) happened to be lot longer the I expected, but at the end it worked. Thx for your time!

[phil-d-wilson]

Thanks for persisting!