Mapping for a DS3 like gamepad

[AnTeBiOss]

Thank you for help me to connect my gamepad

My pad works on, it is connected and react with cncjs as well. But no buttons are correctly mapped.

Could you help me to do it ?

[AnTeBiOss]

When i rune in SIMULATOR mode with -vvv:

pi@raspberrypi:~/cncjs-pendant-gamepad $ bin/cncjs-pendant-gamepad.js -p /dev/ttyUSB0 -b 115200 -t grbl simulate -vvv run 
cncjs-pendant-gamepad is currently running. Stop running with Control-C
Use 'cncjs-pendant-gamepad --help' if you're expecting to see something else here.
CNCpad trace CLI       Creating the GamepadController instance.
CNCpad  info GAMEPAD   attach Sony PLAYSTATION(R)3 Controller (id 0)
CNCpad trace CLI       Starting the main connector service.
CNCpad  info SIMULATOR Attempting connect to ws://localhost:8000
CNCpad  info SIMULATOR Sending open request for /dev/ttyUSB0 at baud rate 115200
CNCpad  info SIMULATOR Connection to /dev/ttyUSB0 successful.
CNCpad  info SIMULATOR Ready to listen for message 'connect' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'error' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'close' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'serialport:open' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'serialport:close' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'serialport:error' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'serialport:read' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'serialport:write' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'controller:settings' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'controller:state' from the socket.
CNCpad  info SIMULATOR Ready to listen for message 'workflow:state' from the socket.
CNCpad trace CLI       Starting the actions service.
CNCpad  info SIMULATOR Ready to listen for message 'serialport:read' from the socket.

I'm trying to make a keymap in chord with my gamepad :)

[AnTeBiOss]

Here i have done my keymap :

A	press { id: 0, num: 0, button: 'KEYCODE_BUTTON_X' }
B	press { id: 0, num: 1, button: 'KEYCODE_BUTTON_A' }
X	press { id: 0, num: 3, button: 'KEYCODE_BUTTON_Y' }
Y	press { id: 0, num: 2, button: 'KEYCODE_BUTTON_B' }
L1	press { id: 0, num: 4, button: 'KEYCODE_BUTTON_L1' }
R1	press { id: 0, num: 5, button: 'KEYCODE_BUTTON_R1' }
L2	press { id: 0, num: 6, button: 'KEYCODE_BUTTON_LTRIGGER' }
	move { id: 0, axis: 2, value: 1, button: 'AXIS_Z' }
R2	press { id: 0, num: 7, button: 'KEYCODE_BUTTON_RTRIGGER' }
	move { id: 0, axis: 5, value: 1, button: 'AXIS_RZ' }
Start	press { id: 0, num: 9, button: 'KEYCODE_BUTTON_START' }
Select	press { id: 0, num: 8, button: 'KEYCODE_BACK' }
Home	press { id: 0, num: 10, button: 'KEYCODE_BUTTON_THUMBL' }
	Left Thumb Enabled:true, Right Thumb Enabled:false
▲	press { id: 0, num: 13, button: 'KEYCODE_BUTTON_TOUCHPAD' }
►	press { id: 0, num: 16, button: undefined }
▼	press { id: 0, num: 14, button: undefined }
◄	press { id: 0, num: 15, button: undefined }
LS ▲▼	move { id: 0, axis: 1, value: -0.3333333134651184, button: 'AXIS_X' }
LS ◄ ►	move { id: 0, axis: 0, value: 0.20000004768371582, button: 'AXIS_Y' }
RS ▲▼	move { id: 0, axis: 4, value: -0.270588219165802, button: 'AXIS_RTRIGGER' }
RS ◄ ►	move { id: 0, axis: 3, value: 0.2705882787704468, button: 'AXIS_LTRIGGER' }
LS clic	press { id: 0, num: 11, button: 'KEYCODE_BUTTON_THUMBR' }
	Left Thumb Enabled:false, Right Thumb Enabled:true
RS Clic	press { id: 0, num: 12, button: 'KEYCODE_HOME' }

With the hope it is well enough.

Thanks by advance

[AnTeBiOss]

I have tried to add this in gamepad_controler.ts without success :

'Sony PLAYSTATION(R)3 Controller': {

    'buttons': {
      '3': 'KEYCODE_BUTTON_X',
      '0': 'KEYCODE_BUTTON_A',
      '1': 'KEYCODE_BUTTON_B',
      '2': 'KEYCODE_BUTTON_Y',
      '4': 'KEYCODE_BUTTON_L1',
      '5': 'KEYCODE_BUTTON_R1',
      '6': 'KEYCODE_BUTTON_LTRIGGER', // note: ALSO activates the axis.
      '7': 'KEYCODE_BUTTON_RTRIGGER', // note: ALSO activates the axis.
      '8': 'KEYCODE_BACK',
      '9': 'KEYCODE_BUTTON_START',
      '10': 'KEYCODE_BUTTON_THUMBL',
      '11': 'KEYCODE_BUTTON_THUMBR',
      '12': 'KEYCODE_HOME',
      '13': 'KEYCODE_BUTTON_TOUCHPAD'
    },

    'axes': {
      '0': 'AXIS_Y',
      '1': 'AXIS_X',
      '2': 'AXIS_Z',
      '3': 'AXIS_LTRIGGER', // note: also activates the button.
      '4': 'AXIS_RTRIGGER', // note: also activates the button.
      '5': 'AXIS_RZ',
      '6': 'AXIS_HAT_X',
      '7': 'AXIS_HAT_Y'
    }
  },

[AnTeBiOss]

Even a Microsoft X-Box 360 pad do not work :/