AddSPIChip

Add new SPI chip

Open Settings - SPI chip database and add chip parameters from datasheet.

• Name - name of chip.
• Page Size - page size in bytes (hexadecimal).
• Block Size - block size in bytes (hexadecimal).
• Total Size - total size in bytes (hexadecimal).
• Page off. - page address offset in whole address. The whole address consists of page address and byte address.
• Read com. - command to read page (hexadecimal).
• Read ID com. - command to chip ID (hexadecimal).
• Write com. - command to write page (hexadecimal).
• Write en. com. - command to enable page write (hexadecimal). Optional (-).
• Erase com. - command to erase block (hexadecimal).
• Status com. - command to read status (hexadecimal).
• Busy bit - bit number of busy bit in status register (starts from 0).
• Busy bit state - state of busy bit in status register when chip is in busy state (0/1).
• Freq. (kHz) - maximum clock frequency for all commands (kHz).
• ID1 - 1st chip ID - manufacturer (hexadecimal).
• ID2 - 2nd chip ID - device ID (hexadecimal). Optional (-).
• ID3 - 3rd chip ID (hexadecimal). Optional (-).
• ID4 - 4th chip ID (hexadecimal). Optional (-).
• ID5 - 5th chip ID (hexadecimal). Optional (-).

Example Samsung AT25SF041: