Can't refresh charts or add USB Dogle

[sailing12388]

I have two Debian 12 systems running OpenCPN 5.8.4 with o-charts plugin 2.0.1.9. One system works perfectly with both a dongle and a simple fingerprint.

The other system fails to see the dongle (it does show in the system) and will not accept the username/password when I try to refresh the charts (even though the list of charts show).

I've completely deleted the OpenCPN settings and reset everything and still have the same issue.

The two errors I get are
"USB key dongle not detected"

and (when trying to refresh the chart list)
"o-Charts shop interface error 3f void password"

[bdbcat]

On the system failing to detect dongle:
Please try:
$sudo apt install libusb-0.1-4

On the password:
Are you using any "special" characters? Best with plain ASCII

[sailing12388]

libusb-0.1-4 is installed. I get this in dmseg:

[2830923.060252] usb 4-2: new full-speed USB device number 13 using xhci_hcd
[2830923.225016] usb 4-2: New USB device found, idVendor=1547, idProduct=1000, bcdDevice= 0.01
[2830923.225023] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[2830923.225025] usb 4-2: Product: SG-Lock USB Key
[2830923.225026] usb 4-2: Manufacturer: SG-Lock

I've changed the password to a very basic text only one.

[bdbcat]

Please try:
$~/.local/bin/oexserverd -a

[sailing12388]

blank

[bdbcat]

Not like this?

dsr@debian:~/Projects/opencpn/build$ ~/.local/bin/oexserverd -a
dsr@debian:~/Projects/opencpn/build$ oexserverd Version 1.21

[sailing12388]

I get that on the system that works but not on the other one.

ray@XPS13:~$ /.local/bin/oexserverd -a
ray@XPS13:$ oexserverd Version 1.21

[bdbcat]

$ ls -l ~/.local/bin

[sailing12388]

-rw-r--r-- 1 xps xps 37586 Dec 20 21:08 libsgllnx64-2.29.02.so
-rwxr-xr-x 1 xps xps 125432 Dec 20 21:08 oexserverd

[bdbcat]

$ ldd ~/.local/bin/oexserverd

[sailing12388]

    linux-vdso.so.1 (0x00007ffcef4e8000)
libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007feb7d339000)
libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007feb7d334000)
libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007feb7cc00000)
libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007feb7d314000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007feb7ce1f000)
libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007feb7d233000)
/lib64/ld-linux-x86-64.so.2 (0x00007feb7d356000)

[bdbcat]

Is this the same issue resolved here?
https://www.cruisersforum.com/forums/f134/o-charts-frustrations-282532-2.html#post3857312

If so, please close.

[tmaczukin]

@dbdcat I'm seeing the same problem with password as sailing12388 did.

OpenCPN version 5.8.4

o-charts plugin version 2.0.6.0

My password contains only ASCII characters and works without problems in the o-charts.org shop! Yet, I still get

o-Charts shop interface error 3f void password

when providing my credentials on charts refresh.

[tmaczukin]

Okay, following the suggestion from #48 (comment) (previously I've ignored this issue as I'm not using the USB dongle on this system) I decided to give it a shot and I've stopped and removed all containers and networks created by Docker. And now communication with the shop passed without any further problems.

So something is definitely wrong here 🙂