Skip to content

Commit f13151f

Browse files
RobertCNelsonRobertCNelson
committed
wireless: import: acc1340
Signed-off-by: Robert Nelson <[email protected]>
1 parent d3ca28f commit f13151f

File tree

29 files changed

+13685
-0
lines changed

29 files changed

+13685
-0
lines changed

‎drivers/net/wireless/Kconfig‎

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -265,6 +265,7 @@ config MWL8K
265265
To compile this driver as a module, choose M here: the module
266266
will be called mwl8k. If unsure, say N.
267267

268+
source "drivers/net/wireless/acc1340/Kconfig"
268269
source "drivers/net/wireless/ath/Kconfig"
269270
source "drivers/net/wireless/b43/Kconfig"
270271
source "drivers/net/wireless/b43legacy/Kconfig"

‎drivers/net/wireless/Makefile‎

Lines changed: 2 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -49,6 +49,8 @@ obj-$(CONFIG_WL_MEDIATEK) += mediatek/
4949

5050
obj-$(CONFIG_P54_COMMON) += p54/
5151

52+
obj-$(CONFIG_ACC1340) += acc1340/
53+
5254
obj-$(CONFIG_ATH_CARDS) += ath/
5355

5456
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o

‎drivers/net/wireless/acc1340/Kconfig‎

Lines changed: 30 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,30 @@
1+
config ACC1340
2+
tristate "ACC1340 WLAN support"
3+
depends on MAC80211 && CFG80211
4+
help
5+
This is a driver for the Amp'ed RF ACC1340 WLAN chipsets.
6+
This option just enables the driver core, see below for
7+
specific bus support.
8+
9+
if ACC1340
10+
11+
config ACC1340_WLAN_SDIO
12+
tristate "Support SDIO platforms"
13+
depends on ACC1340 && MMC
14+
help
15+
Enable support for the ACC1340 connected via an SDIO bus.
16+
By default this driver only supports the Sagrad SG901-1091/1098 EVK
17+
and similar designs that utilize a hardware reset circuit. To
18+
support different ACC1340 SDIO designs you will need to override
19+
the default platform data by calling cw1200_sdio_set_platform_data()
20+
in your board setup file.
21+
22+
config ACC1340_WLAN_SPI
23+
tristate "Support SPI platforms"
24+
depends on ACC1340 && SPI
25+
help
26+
Enables support for the ACC1340 connected via a SPI bus. You will
27+
need to add appropriate platform data glue in your board setup
28+
file.
29+
30+
endif

‎drivers/net/wireless/acc1340/Makefile‎

Lines changed: 21 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,21 @@
1+
acc1340_core-y := \
2+
fwio.o \
3+
txrx.o \
4+
main.o \
5+
queue.o \
6+
hwio.o \
7+
bh.o \
8+
wsm.o \
9+
sta.o \
10+
scan.o \
11+
debug.o
12+
acc1340_core-$(CONFIG_PM) += pm.o
13+
14+
# CFLAGS_sta.o += -DDEBUG
15+
16+
acc1340_wlan_sdio-y := acc1340_sdio.o
17+
acc1340_wlan_spi-y := acc1340_spi.o
18+
19+
obj-$(CONFIG_ACC1340) += acc1340_core.o
20+
obj-$(CONFIG_ACC1340_WLAN_SDIO) += acc1340_wlan_sdio.o
21+
obj-$(CONFIG_ACC1340_WLAN_SPI) += acc1340_wlan_spi.o

‎drivers/net/wireless/acc1340/acc1340.h‎

Lines changed: 323 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,323 @@
1+
/*
2+
* Common private data for ST-Ericsson CW1200 drivers
3+
*
4+
* Copyright (c) 2010, ST-Ericsson
5+
* Author: Dmitry Tarnyagin <[email protected]>
6+
*
7+
* Based on the mac80211 Prism54 code, which is
8+
* Copyright (c) 2006, Michael Wu <[email protected]>
9+
*
10+
* Based on the islsm (softmac prism54) driver, which is:
11+
* Copyright 2004-2006 Jean-Baptiste Note <[email protected]>, et al.
12+
*
13+
* This program is free software; you can redistribute it and/or modify
14+
* it under the terms of the GNU General Public License version 2 as
15+
* published by the Free Software Foundation.
16+
*/
17+
18+
#ifndef CW1200_H
19+
#define CW1200_H
20+
21+
#include <linux/wait.h>
22+
#include <linux/mutex.h>
23+
#include <linux/workqueue.h>
24+
#include <net/mac80211.h>
25+
26+
#include "queue.h"
27+
#include "wsm.h"
28+
#include "scan.h"
29+
#include "txrx.h"
30+
#include "pm.h"
31+
32+
/* Forward declarations */
33+
struct hwbus_ops;
34+
struct task_struct;
35+
struct cw1200_debug_priv;
36+
struct firmware;
37+
38+
#define CW1200_MAX_CTRL_FRAME_LEN (0x1000)
39+
40+
#define CW1200_MAX_STA_IN_AP_MODE (5)
41+
#define CW1200_LINK_ID_AFTER_DTIM (CW1200_MAX_STA_IN_AP_MODE + 1)
42+
#define CW1200_LINK_ID_UAPSD (CW1200_MAX_STA_IN_AP_MODE + 2)
43+
#define CW1200_LINK_ID_MAX (CW1200_MAX_STA_IN_AP_MODE + 3)
44+
#define CW1200_MAX_REQUEUE_ATTEMPTS (5)
45+
46+
#define CW1200_MAX_TID (8)
47+
48+
#define CW1200_BLOCK_ACK_CNT (30)
49+
#define CW1200_BLOCK_ACK_THLD (800)
50+
#define CW1200_BLOCK_ACK_HIST (3)
51+
#define CW1200_BLOCK_ACK_INTERVAL (1 * HZ / CW1200_BLOCK_ACK_HIST)
52+
53+
#define CW1200_JOIN_TIMEOUT (1 * HZ)
54+
#define CW1200_AUTH_TIMEOUT (5 * HZ)
55+
56+
struct cw1200_ht_info {
57+
struct ieee80211_sta_ht_cap ht_cap;
58+
enum nl80211_channel_type channel_type;
59+
u16 operation_mode;
60+
};
61+
62+
/* Please keep order */
63+
enum cw1200_join_status {
64+
CW1200_JOIN_STATUS_PASSIVE = 0,
65+
CW1200_JOIN_STATUS_MONITOR,
66+
CW1200_JOIN_STATUS_JOINING,
67+
CW1200_JOIN_STATUS_PRE_STA,
68+
CW1200_JOIN_STATUS_STA,
69+
CW1200_JOIN_STATUS_IBSS,
70+
CW1200_JOIN_STATUS_AP,
71+
};
72+
73+
enum cw1200_link_status {
74+
CW1200_LINK_OFF,
75+
CW1200_LINK_RESERVE,
76+
CW1200_LINK_SOFT,
77+
CW1200_LINK_HARD,
78+
CW1200_LINK_RESET,
79+
CW1200_LINK_RESET_REMAP,
80+
};
81+
82+
extern int cw1200_power_mode;
83+
extern const char * const cw1200_fw_types[];
84+
85+
struct cw1200_link_entry {
86+
unsigned long timestamp;
87+
enum cw1200_link_status status;
88+
enum cw1200_link_status prev_status;
89+
u8 mac[ETH_ALEN];
90+
u8 buffered[CW1200_MAX_TID];
91+
struct sk_buff_head rx_queue;
92+
};
93+
94+
struct cw1200_common {
95+
/* interfaces to the rest of the stack */
96+
struct ieee80211_hw *hw;
97+
struct ieee80211_vif *vif;
98+
struct device *pdev;
99+
100+
/* Statistics */
101+
struct ieee80211_low_level_stats stats;
102+
103+
/* Our macaddr */
104+
u8 mac_addr[ETH_ALEN];
105+
106+
/* Hardware interface */
107+
const struct hwbus_ops *hwbus_ops;
108+
struct hwbus_priv *hwbus_priv;
109+
110+
/* Hardware information */
111+
enum {
112+
HIF_9000_SILICON_VERSATILE = 0,
113+
HIF_8601_VERSATILE,
114+
HIF_8601_SILICON,
115+
} hw_type;
116+
enum {
117+
CW1200_HW_REV_CUT10 = 10,
118+
CW1200_HW_REV_CUT11 = 11,
119+
CW1200_HW_REV_CUT20 = 20,
120+
CW1200_HW_REV_CUT22 = 22,
121+
CW1X60_HW_REV = 40,
122+
} hw_revision;
123+
int hw_refclk;
124+
bool hw_have_5ghz;
125+
const struct firmware *sdd;
126+
char *sdd_path;
127+
128+
struct cw1200_debug_priv *debug;
129+
130+
struct workqueue_struct *workqueue;
131+
struct mutex conf_mutex;
132+
133+
struct cw1200_queue tx_queue[4];
134+
struct cw1200_queue_stats tx_queue_stats;
135+
int tx_burst_idx;
136+
137+
/* firmware/hardware info */
138+
unsigned int tx_hdr_len;
139+
140+
/* Radio data */
141+
int output_power;
142+
143+
/* BBP/MAC state */
144+
struct ieee80211_rate *rates;
145+
struct ieee80211_rate *mcs_rates;
146+
struct ieee80211_channel *channel;
147+
struct wsm_edca_params edca;
148+
struct wsm_tx_queue_params tx_queue_params;
149+
struct wsm_mib_association_mode association_mode;
150+
struct wsm_set_bss_params bss_params;
151+
struct cw1200_ht_info ht_info;
152+
struct wsm_set_pm powersave_mode;
153+
struct wsm_set_pm firmware_ps_mode;
154+
int cqm_rssi_thold;
155+
unsigned cqm_rssi_hyst;
156+
bool cqm_use_rssi;
157+
int cqm_beacon_loss_count;
158+
int channel_switch_in_progress;
159+
wait_queue_head_t channel_switch_done;
160+
u8 long_frame_max_tx_count;
161+
u8 short_frame_max_tx_count;
162+
int mode;
163+
bool enable_beacon;
164+
int beacon_int;
165+
bool listening;
166+
struct wsm_rx_filter rx_filter;
167+
struct wsm_mib_multicast_filter multicast_filter;
168+
bool has_multicast_subscription;
169+
bool disable_beacon_filter;
170+
struct work_struct update_filtering_work;
171+
struct work_struct set_beacon_wakeup_period_work;
172+
173+
u8 ba_rx_tid_mask;
174+
u8 ba_tx_tid_mask;
175+
176+
struct cw1200_pm_state pm_state;
177+
178+
struct wsm_p2p_ps_modeinfo p2p_ps_modeinfo;
179+
struct wsm_uapsd_info uapsd_info;
180+
bool setbssparams_done;
181+
bool bt_present;
182+
u8 conf_listen_interval;
183+
u32 listen_interval;
184+
u32 erp_info;
185+
u32 rts_threshold;
186+
187+
/* BH */
188+
atomic_t bh_rx;
189+
atomic_t bh_tx;
190+
atomic_t bh_term;
191+
atomic_t bh_suspend;
192+
193+
struct workqueue_struct *bh_workqueue;
194+
struct work_struct bh_work;
195+
196+
int bh_error;
197+
wait_queue_head_t bh_wq;
198+
wait_queue_head_t bh_evt_wq;
199+
u8 buf_id_tx;
200+
u8 buf_id_rx;
201+
u8 wsm_rx_seq;
202+
u8 wsm_tx_seq;
203+
int hw_bufs_used;
204+
bool powersave_enabled;
205+
bool device_can_sleep;
206+
207+
/* Scan status */
208+
struct cw1200_scan scan;
209+
/* Keep cw1200 awake (WUP = 1) 1 second after each scan to avoid
210+
* FW issue with sleeping/waking up.
211+
*/
212+
atomic_t recent_scan;
213+
struct delayed_work clear_recent_scan_work;
214+
215+
/* WSM */
216+
struct wsm_startup_ind wsm_caps;
217+
struct mutex wsm_cmd_mux;
218+
struct wsm_buf wsm_cmd_buf;
219+
struct wsm_cmd wsm_cmd;
220+
wait_queue_head_t wsm_cmd_wq;
221+
wait_queue_head_t wsm_startup_done;
222+
int firmware_ready;
223+
atomic_t tx_lock;
224+
225+
/* WSM debug */
226+
int wsm_enable_wsm_dumps;
227+
228+
/* WSM Join */
229+
enum cw1200_join_status join_status;
230+
u32 pending_frame_id;
231+
bool join_pending;
232+
struct delayed_work join_timeout;
233+
struct work_struct unjoin_work;
234+
struct work_struct join_complete_work;
235+
int join_complete_status;
236+
int join_dtim_period;
237+
bool delayed_unjoin;
238+
239+
/* TX/RX and security */
240+
s8 wep_default_key_id;
241+
struct work_struct wep_key_work;
242+
u32 key_map;
243+
struct wsm_add_key keys[WSM_KEY_MAX_INDEX + 1];
244+
245+
/* AP powersave */
246+
u32 link_id_map;
247+
struct cw1200_link_entry link_id_db[CW1200_MAX_STA_IN_AP_MODE];
248+
struct work_struct link_id_work;
249+
struct delayed_work link_id_gc_work;
250+
u32 sta_asleep_mask;
251+
u32 pspoll_mask;
252+
bool aid0_bit_set;
253+
spinlock_t ps_state_lock; /* Protect power save state */
254+
bool buffered_multicasts;
255+
bool tx_multicast;
256+
struct work_struct set_tim_work;
257+
struct work_struct set_cts_work;
258+
struct work_struct multicast_start_work;
259+
struct work_struct multicast_stop_work;
260+
struct timer_list mcast_timeout;
261+
262+
/* WSM events and CQM implementation */
263+
spinlock_t event_queue_lock; /* Protect event queue */
264+
struct list_head event_queue;
265+
struct work_struct event_handler;
266+
267+
struct delayed_work bss_loss_work;
268+
spinlock_t bss_loss_lock; /* Protect BSS loss state */
269+
int bss_loss_state;
270+
u32 bss_loss_confirm_id;
271+
int delayed_link_loss;
272+
struct work_struct bss_params_work;
273+
274+
/* TX rate policy cache */
275+
struct tx_policy_cache tx_policy_cache;
276+
struct work_struct tx_policy_upload_work;
277+
278+
/* legacy PS mode switch in suspend */
279+
int ps_mode_switch_in_progress;
280+
wait_queue_head_t ps_mode_switch_done;
281+
282+
/* Workaround for WFD testcase 6.1.10*/
283+
struct work_struct linkid_reset_work;
284+
u8 action_frame_sa[ETH_ALEN];
285+
u8 action_linkid;
286+
};
287+
288+
struct cw1200_sta_priv {
289+
int link_id;
290+
};
291+
292+
/* interfaces for the drivers */
293+
int cw1200_core_probe(const struct hwbus_ops *hwbus_ops,
294+
struct hwbus_priv *hwbus,
295+
struct device *pdev,
296+
struct cw1200_common **pself,
297+
int ref_clk, const u8 *macaddr,
298+
const char *sdd_path, bool have_5ghz);
299+
void cw1200_core_release(struct cw1200_common *self);
300+
301+
#define FWLOAD_BLOCK_SIZE (1024)
302+
303+
static inline int cw1200_is_ht(const struct cw1200_ht_info *ht_info)
304+
{
305+
return ht_info->channel_type != NL80211_CHAN_NO_HT;
306+
}
307+
308+
static inline int cw1200_ht_greenfield(const struct cw1200_ht_info *ht_info)
309+
{
310+
return cw1200_is_ht(ht_info) &&
311+
(ht_info->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
312+
!(ht_info->operation_mode &
313+
IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
314+
}
315+
316+
static inline int cw1200_ht_ampdu_density(const struct cw1200_ht_info *ht_info)
317+
{
318+
if (!cw1200_is_ht(ht_info))
319+
return 0;
320+
return ht_info->ht_cap.ampdu_density;
321+
}
322+
323+
#endif /* CW1200_H */

0 commit comments

Comments
 (0)