Add VELOF722AIO (#797)

Author: ot0tot

Manufacturers.md

@@ -127,6 +127,7 @@ This is the official list of manufacturer ids (`manufacturer_id` in the target c
 |TURC|TUNERC|https://www.tunerc.com/|
 |VGRC|V-GOOD Technology Co.|http://www.vgoodrc.com/|
 |VIVA|VivaFPV|https://vivafpv.com/|
+|VWIN|Huizhou Xinchuang Technology Co., Ltd.||
 |WDIY|WDIY|http://wdiy.net.cn/|
 |WIZZ|WIZZ|https://wizz.store/|
 |WRPL|Warp Labs|https://www.warplabs.it/|

configs/VWING_F722AIO/config.h

@@ -0,0 +1,101 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU     STM32F7X2
+
+#define BOARD_NAME        VWING_F722AIO
+#define MANUFACTURER_ID   VWIN
+
+#define USE_ACC
+#define USE_ACC_SPI_ICM42688P
+#define USE_GYRO
+#define USE_GYRO_SPI_ICM42688P
+#define USE_FLASH
+#define USE_FLASH_M25P16
+#define USE_BARO
+#define USE_BARO_DPS310
+#define USE_MAX7456
+
+#define BEEPER_PIN           PC13
+#define MOTOR1_PIN           PB4
+#define MOTOR2_PIN           PB5
+#define MOTOR3_PIN           PB0
+#define MOTOR4_PIN           PB1
+#define LED_STRIP_PIN        PA8
+
+#define UART1_TX_PIN         PA9
+#define UART1_RX_PIN         PA10
+#define UART2_TX_PIN         PA2
+#define UART2_RX_PIN         PA3
+#define UART3_TX_PIN         PB10
+#define UART3_RX_PIN         PB11
+#define UART4_TX_PIN         PA0
+#define UART4_RX_PIN         PA1
+#define UART6_TX_PIN         PC6
+#define UART6_RX_PIN         PC7
+
+#define I2C1_SCL_PIN         PB8
+#define I2C1_SDA_PIN         PB9
+
+#define SPI1_SCK_PIN         PA5
+#define SPI1_SDI_PIN         PA6
+#define SPI1_SDO_PIN         PA7
+
+#define SPI2_SCK_PIN         PB13
+#define SPI2_SDI_PIN         PB14
+#define SPI2_SDO_PIN         PB15
+
+#define SPI3_SCK_PIN         PC10
+#define SPI3_SDI_PIN         PC11
+#define SPI3_SDO_PIN         PC12
+
+#define ADC_VBAT_PIN         PC2
+#define ADC_CURR_PIN         PC1
+
+#define LED0_PIN             PA13
+#define LED1_PIN             PA14
+
+#define MAX7456_SPI_CS_PIN   PB12
+#define FLASH_CS_PIN         PD2
+#define GYRO_1_CS_PIN        PB2
+#define GYRO_1_EXTI_PIN      PC4
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP( 0, PB4 , 1,  0) \
+    TIMER_PIN_MAP( 1, PB5 , 1,  0) \
+    TIMER_PIN_MAP( 2, PB0 , 2,  0) \
+    TIMER_PIN_MAP( 3, PB1 , 2,  0) \
+    TIMER_PIN_MAP( 4, PA8 , 1,  0) 
+
+#define ADC1_DMA_OPT                   1
+#define MAG_I2C_INSTANCE               I2CDEV_1
+#define BARO_I2C_INSTANCE              I2CDEV_1
+#define DEFAULT_DSHOT_BITBANG          DSHOT_BITBANG_ON
+#define DEFAULT_CURRENT_METER_SOURCE   CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE   VOLTAGE_METER_ADC
+#define BEEPER_INVERTED
+#define DEFAULT_BLACKBOX_DEVICE        BLACKBOX_DEVICE_FLASH
+#define GYRO_1_SPI_INSTANCE            SPI1
+#define GYRO_1_ALIGN                   CW180_DEG
+#define MAX7456_SPI_INSTANCE           SPI2
+#define FLASH_SPI_INSTANCE             SPI3