Add HGLRC_H743_LITE target board

Author: HGLRC-T

configs/HGLRC_H743_LITE/config.h

@@ -0,0 +1,135 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU       STM32H743
+
+#define BOARD_NAME          HGLRC_H743_LITE
+#define MANUFACTURER_ID     HGLR
+
+#define USE_ACC
+#define USE_ACC_SPI_ICM42688P
+#define USE_GYRO
+#define USE_GYRO_SPI_ICM42688P
+#define USE_BARO
+#define USE_BARO_DPS310
+#define USE_MAX7456
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+
+#define SPI1_SCK_PIN            PA5
+#define SPI1_SDI_PIN            PA6
+#define SPI1_SDO_PIN            PA7
+#define GYRO_1_EXTI_PIN         PC5
+#define GYRO_1_CS_PIN           PA4
+#define GYRO_1_SPI_INSTANCE     SPI1
+#define USE_GYRO_CLKIN
+#define GYRO_1_CLKIN_PIN        PC6
+
+#define SPI2_SCK_PIN            PB13
+#define SPI2_SDI_PIN            PB14
+#define SPI2_SDO_PIN            PB15
+#define MAX7456_SPI_CS_PIN      PB12
+#define MAX7456_SPI_INSTANCE    SPI2
+
+#define SPI3_SCK_PIN            PB3
+#define SPI3_SDI_PIN            PB4
+#define SPI3_SDO_PIN            PB2
+#define FLASH_CS_PIN            PA15
+#define FLASH_SPI_INSTANCE      SPI3
+#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
+
+#define BEEPER_PIN              PE5
+#define MOTOR1_PIN              PE9
+#define MOTOR2_PIN              PE11
+#define MOTOR3_PIN              PE13
+#define MOTOR4_PIN              PE14
+#define LED_STRIP_PIN           PA0
+
+#define UART1_TX_PIN            PA9
+#define UART1_RX_PIN            PA10
+#define UART2_TX_PIN            PD5
+#define UART2_RX_PIN            PD6
+#define UART3_TX_PIN            PD8
+#define UART3_RX_PIN            PD9
+#define UART4_TX_PIN            PD1
+#define UART4_RX_PIN            PA1
+#define UART5_TX_PIN            PB6
+#define UART5_RX_PIN            PB5
+#define UART7_TX_PIN            PE8
+#define UART7_RX_PIN            PE7
+#define UART8_TX_PIN            PE1
+#define UART8_RX_PIN            PE0
+
+#define I2C1_SCL_PIN            PB8
+#define I2C1_SDA_PIN            PB7
+#define I2C2_SCL_PIN            PB10
+#define I2C2_SDA_PIN            PB11
+
+#define LED0_PIN                PE6
+#define LED1_PIN                PE4
+#define LED2_PIN                PE3
+
+#define ADC_VBAT_PIN            PC0
+#define ADC_CURR_PIN            PC1
+
+#define TIMER_PIN_MAPPING \
+    TIMER_PIN_MAP(0, BEEPER_PIN,       1, -1) \
+    TIMER_PIN_MAP(1, MOTOR1_PIN,       1,  0) \
+    TIMER_PIN_MAP(2, MOTOR2_PIN,       1,  1) \
+    TIMER_PIN_MAP(3, MOTOR3_PIN,       1,  2) \
+    TIMER_PIN_MAP(4, MOTOR4_PIN,       1,  3) \
+    TIMER_PIN_MAP(5, LED_STRIP_PIN,    1,  8) \
+    TIMER_PIN_MAP(6, GYRO_1_CLKIN_PIN, 1, -1)
+
+#define ADC1_DMA_OPT        9
+#define ADC3_DMA_OPT        10
+#define TIMUP1_DMA_OPT      11
+#define TIMUP5_DMA_OPT      12
+
+#define BARO_I2C_INSTANCE   I2CDEV_1
+#define MAG_I2C_INSTANCE    I2CDEV_2
+
+#define DEFAULT_CURRENT_METER_SOURCE    CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE    VOLTAGE_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SCALE     210
+
+#define PINIO1_PIN  PE2
+#define PINIO2_PIN  PC13
+#define PINIO3_PIN  PC14
+#define PINIO4_PIN  PC15
+
+#define PINIO1_BOX     40
+#define PINIO1_CONFIG  129
+
+#define PINIO2_BOX     41
+#define PINIO2_CONFIG  129
+
+#define PINIO3_BOX     42
+#define PINIO3_CONFIG  129
+#define BOX_USER3_NAME "12V BEC"
+
+#define PINIO4_BOX     43
+#define PINIO4_CONFIG  129
+#define BOX_USER4_NAME "CAM 1,2"
+
+#define BEEPER_INVERTED