chore: typos fixed

Author: realeinherjar

.github/workflows/code_coverage.yml

@@ -27,6 +27,7 @@ jobs:
         uses: Swatinem/[email protected]
       - name: Install grcov
         run: if [[ ! -e ~/.cargo/bin/grcov ]]; then cargo install grcov; fi
+        # TODO: re-enable the hwi tests
       - name: Build simulator image
         run: docker build -t hwi/ledger_emulator ./ci -f ci/Dockerfile.ledger
       - name: Run simulator image

CHANGELOG.md

@@ -517,7 +517,7 @@ final transaction is created by calling `finish` on the builder.
 - Default to SIGHASH_ALL if not specified
 - Replace ChangeSpendPolicy::filter_utxos with a predicate
 - Make 'unspendable' into a HashSet
-- Stop implicitly enforcing manaul selection by .add_utxo
+- Stop implicitly enforcing manual selection by .add_utxo
 - Rename DumbCS to LargestFirstCoinSelection
 - Rename must_use_utxos to required_utxos
 - Rename may_use_utxos to optional_uxtos

crates/bdk/src/descriptor/policy.rs

@@ -521,7 +521,7 @@ pub enum PolicyError {
 impl fmt::Display for PolicyError {
     fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         match self {
-            Self::NotEnoughItemsSelected(err) => write!(f, "Not enought items selected: {}", err),
+            Self::NotEnoughItemsSelected(err) => write!(f, "Not enough items selected: {}", err),
             Self::IndexOutOfRange(index) => write!(f, "Index out of range: {}", index),
             Self::AddOnLeaf => write!(f, "Add on leaf"),
             Self::AddOnPartialComplete => write!(f, "Add on partial complete"),

crates/bdk/src/wallet/mod.rs

@@ -1459,7 +1459,7 @@ impl<D> Wallet<D> {
                 };
 
                 // TODO: We should pay attention when adding a new output: this might increase
-                // the lenght of the "number of vouts" parameter by 2 bytes, potentially making
+                // the length of the "number of vouts" parameter by 2 bytes, potentially making
                 // our feerate too low
                 tx.output.push(drain_output);
             }

crates/bdk/src/wallet/signer.rs

@@ -754,7 +754,7 @@ pub struct SignOptions {
     /// Whether the signer should trust the `witness_utxo`, if the `non_witness_utxo` hasn't been
     /// provided
     ///
-    /// Defaults to `false` to mitigate the "SegWit bug" which chould trick the wallet into
+    /// Defaults to `false` to mitigate the "SegWit bug" which should trick the wallet into
     /// paying a fee larger than expected.
     ///
     /// Some wallets, especially if relatively old, might not provide the `non_witness_utxo` for

crates/bdk/src/wallet/tx_builder.rs

@@ -182,7 +182,7 @@ impl<'a, D, Cs: Clone, Ctx> Clone for TxBuilder<'a, D, Cs, Ctx> {
 impl<'a, D, Cs: CoinSelectionAlgorithm, Ctx: TxBuilderContext> TxBuilder<'a, D, Cs, Ctx> {
     /// Set a custom fee rate
     /// The fee_rate method sets the mining fee paid by the transaction as a rate on its size.
-    /// This means that the total fee paid is equal to this rate * size of the transaction in virtual Bytes (vB) or Weigth Unit (wu).
+    /// This means that the total fee paid is equal to this rate * size of the transaction in virtual Bytes (vB) or Weight Unit (wu).
     /// This rate is internally expressed in satoshis-per-virtual-bytes (sats/vB) using FeeRate::from_sat_per_vb, but can also be set by:
     /// * sats/kvB (1000 sats/kvB == 1 sats/vB) using FeeRate::from_sat_per_kvb
     /// * btc/kvB (0.00001000 btc/kvB == 1 sats/vB) using FeeRate::from_btc_per_kvb

crates/bdk/tests/wallet.rs

@@ -1293,7 +1293,7 @@ fn test_add_foreign_utxo_where_outpoint_doesnt_match_psbt_input() {
                 satisfaction_weight
             )
             .is_ok(),
-        "shoulld be ok when outpoint does match psbt_input"
+        "should be ok when outpoint does match psbt_input"
     );
 }
 
@@ -2013,7 +2013,7 @@ fn test_bump_fee_add_input_change_dust() {
 
     let mut tx = psbt.extract_tx();
     for txin in &mut tx.input {
-        txin.witness.push([0x00; P2WPKH_FAKE_WITNESS_SIZE]); // to get realisitc weight
+        txin.witness.push([0x00; P2WPKH_FAKE_WITNESS_SIZE]); // to get realistic weight
     }
     let original_tx_weight = tx.weight();
     assert_eq!(tx.input.len(), 1);

crates/bitcoind_rpc/tests/test_emitter.rs

@@ -735,7 +735,7 @@ fn mempool_during_reorg() -> anyhow::Result<()> {
         "first mempool emission should include all txs",
     );
 
-    // perform reorgs at different heights, these reorgs will not comfirm transactions in the
+    // perform reorgs at different heights, these reorgs will not confirm transactions in the
     // mempool
     for reorg_count in 1..TIP_DIFF {
         println!("REORG COUNT: {}", reorg_count);
@@ -808,10 +808,10 @@ fn mempool_during_reorg() -> anyhow::Result<()> {
 /// If blockchain re-org includes the start height, emit new start height block
 ///
 /// 1. mine 101 blocks
-/// 2. emmit blocks 99a, 100a
+/// 2. emit blocks 99a, 100a
 /// 3. invalidate blocks 99a, 100a, 101a
 /// 4. mine new blocks 99b, 100b, 101b
-/// 5. emmit block 99b
+/// 5. emit block 99b
 ///
 /// The block hash of 99b should be different than 99a, but their previous block hashes should
 /// be the same.

crates/chain/src/indexed_tx_graph.rs

@@ -160,7 +160,7 @@ where
     /// Batch insert unconfirmed transactions, filtering out those that are irrelevant.
     ///
     /// Relevancy is determined by the internal [`Indexer::is_tx_relevant`] implementation of `I`.
-    /// Irrelevant tansactions in `txs` will be ignored.
+    /// Irrelevant transactions in `txs` will be ignored.
     ///
     /// Items of `txs` are tuples containing the transaction and a *last seen* timestamp. The
     /// *last seen* communicates when the transaction is last seen in the mempool which is used for
@@ -223,7 +223,7 @@ where
     /// [`AnchorFromBlockPosition::from_block_position`].
     ///
     /// Relevancy is determined by the internal [`Indexer::is_tx_relevant`] implementation of `I`.
-    /// Irrelevant tansactions in `txs` will be ignored.
+    /// Irrelevant transactions in `txs` will be ignored.
     pub fn apply_block_relevant(
         &mut self,
         block: Block,

crates/chain/src/tx_graph.rs

@@ -480,7 +480,7 @@ impl<A: Clone + Ord> TxGraph<A> {
 
     /// Inserts the given `seen_at` for `txid` into [`TxGraph`].
     ///
-    /// Note that [`TxGraph`] only keeps track of the lastest `seen_at`.
+    /// Note that [`TxGraph`] only keeps track of the latest `seen_at`.
     pub fn insert_seen_at(&mut self, txid: Txid, seen_at: u64) -> ChangeSet<A> {
         let mut update = Self::default();
         let (_, _, update_last_seen) = update.txs.entry(txid).or_default();