docs(swan_r5):todo cleanup

Author: m-mcgowan

ports/stm/common-hal/busio/I2C.c

@@ -36,7 +36,7 @@
 
 // I2C timing specs for the H7 and F7
 // Configured for maximum possible clock settings for the family
-#if (CPY_STM32F7)        // todo - get the correct values for the L4
+#if (CPY_STM32F7)
 #ifndef CPY_I2CFAST_TIMINGR
 #define CPY_I2CFAST_TIMINGR     0x6000030D
 #endif

ports/stm/peripherals/stm32l4/stm32l4r5xx/periph.c

@@ -165,7 +165,6 @@ const mcu_periph_obj_t mcu_uart_rx_list[UART_RX_ARRAY_LEN] = {
     PERIPH(1, 7, &pin_PG10),
 };
 
-// todo
 // Timers
 // TIM6 and TIM7 are basic timers that are only used by DAC, and don't have pins
 TIM_TypeDef *mcu_tim_banks[TIM_BANK_ARRAY_LEN] = {TIM1, TIM2, TIM3, TIM4, TIM5, TIM15, TIM16};

ports/stm/supervisor/internal_flash.c

@@ -96,8 +96,8 @@ STATIC uint8_t _flash_cache[0x20000] __attribute__((aligned(4)));
 
 #elif defined(STM32L4)
 // todo - the L4 devices can have different flash sizes and different page sizes
-// depending upon the configuration
-// This is hardcoded for the Blues Swan. When support for other devices is needed more conditionals will be required
+// depending upon the dual bank configuration
+// This is hardcoded for the Swan R5. When support for other devices is needed more conditionals will be required
 // to differentiate.
 STATIC const flash_layout_t flash_layout[] = {
     { 0x08000000, 0x1000, 256 },
@@ -170,7 +170,7 @@ uint32_t flash_get_sector_info(uint32_t addr, uint32_t *start_addr, uint32_t *si
             }
         }
     }
-    return 0;   // todo dangerous - shouldn't this raise an exception
+    return 0;   // todo dangerous - shouldn't this raise an exception?
 }
 
 void supervisor_flash_init(void) {