style(swan_r5): pre-commit whitespace style changes

Author: m-mcgowan

ports/stm/hal_conf/stm32l4xx_hal_conf.h

@@ -26,7 +26,7 @@
 #define STM32L4xx_HAL_CONF_H
 
 #ifdef __cplusplus
- extern "C" {
+extern "C" {
 #endif
 
 /* Exported types ------------------------------------------------------------*/
@@ -94,19 +94,19 @@
   *        This value is used by the RCC HAL module to compute the system frequency
   *        (when HSE is used as system clock source, directly or through the PLL).
   */
-#if !defined  (HSE_VALUE)
+#if !defined(HSE_VALUE)
   #define HSE_VALUE    8000000U /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
-#if !defined  (HSE_STARTUP_TIMEOUT)
+#if !defined(HSE_STARTUP_TIMEOUT)
   #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
   * @brief Internal Multiple Speed oscillator (MSI) default value.
   *        This value is the default MSI range value after Reset.
   */
-#if !defined  (MSI_VALUE)
+#if !defined(MSI_VALUE)
   #define MSI_VALUE    4000000U /*!< Value of the Internal oscillator in Hz*/
 #endif /* MSI_VALUE */
 
@@ -115,7 +115,7 @@
   *        This value is used by the RCC HAL module to compute the system frequency
   *        (when HSI is used as system clock source, directly or through the PLL).
   */
-#if !defined  (HSI_VALUE)
+#if !defined(HSI_VALUE)
   #define HSI_VALUE    16000000U /*!< Value of the Internal oscillator in Hz*/
 #endif /* HSI_VALUE */
 
@@ -126,15 +126,15 @@
   *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
   *        which is subject to manufacturing process variations.
   */
-#if !defined  (HSI48_VALUE)
+#if !defined(HSI48_VALUE)
   #define HSI48_VALUE   48000000U             /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
                                                The real value my vary depending on manufacturing process variations.*/
 #endif /* HSI48_VALUE */
 
 /**
   * @brief Internal Low Speed oscillator (LSI) value.
   */
-#if !defined  (LSI_VALUE)
+#if !defined(LSI_VALUE)
   #define LSI_VALUE  32000U                 /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                               The real value may vary depending on the variations
@@ -143,11 +143,11 @@
   * @brief External Low Speed oscillator (LSE) value.
   *        This value is used by the UART, RTC HAL module to compute the system frequency
   */
-#if !defined  (LSE_VALUE)
+#if !defined(LSE_VALUE)
   #define LSE_VALUE    32768U /*!< Value of the External oscillator in Hz*/
 #endif /* LSE_VALUE */
 
-#if !defined  (LSE_STARTUP_TIMEOUT)
+#if !defined(LSE_STARTUP_TIMEOUT)
   #define LSE_STARTUP_TIMEOUT    5000U  /*!< Time out for LSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
@@ -156,7 +156,7 @@
   *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
   *        frequency.
   */
-#if !defined  (EXTERNAL_SAI1_CLOCK_VALUE)
+#if !defined(EXTERNAL_SAI1_CLOCK_VALUE)
   #define EXTERNAL_SAI1_CLOCK_VALUE    48000U /*!< Value of the SAI1 External clock source in Hz*/
 #endif /* EXTERNAL_SAI1_CLOCK_VALUE */
 
@@ -165,7 +165,7 @@
   *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
   *        frequency.
   */
-#if !defined  (EXTERNAL_SAI2_CLOCK_VALUE)
+#if !defined(EXTERNAL_SAI2_CLOCK_VALUE)
   #define EXTERNAL_SAI2_CLOCK_VALUE    48000U /*!< Value of the SAI2 External clock source in Hz*/
 #endif /* EXTERNAL_SAI2_CLOCK_VALUE */
 
@@ -457,7 +457,7 @@
   */
   #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t *file, uint32_t line);
+void assert_failed(uint8_t *file, uint32_t line);
 #else
   #define assert_param(expr) ((void)0U)
 #endif /* USE_FULL_ASSERT */

ports/stm/supervisor/usb.c

@@ -69,10 +69,10 @@ STATIC void init_usb_vbus_sense(void) {
 
 void init_usb_hardware(void) {
 
-  /* Enable USB power on Pwrctrl CR2 register */
-#ifdef PWR_CR2_USV
+    /* Enable USB power on Pwrctrl CR2 register */
+    #ifdef PWR_CR2_USV
     HAL_PWREx_EnableVddUSB();
-#endif
+    #endif
 
     // TODO: if future chips overload this with options, move to peripherals management.
 
@@ -145,7 +145,7 @@ void init_usb_hardware(void) {
     #endif
 
 
-  init_usb_vbus_sense();
+    init_usb_vbus_sense();
 }
 
 void OTG_FS_IRQHandler(void) {