联发科天玑 9400 对 KPM 好像存在问题。一加载模块就会自动重启，重启后没有任何模块加载，也没有任何反应。同机型、同系统，其他搭载骁龙的 SoC 就没有问题。 The KP of MediaTek Dimensity 9400+ seems to have issues. The device restarts automatically as soon as a module is loaded, and after restarting, no modules are loaded and there is no response at all. For the same model and system, other devices equipped with Snapdragon SoCs have no such problems.

[PLMmko]

Please check before submitting an issue | 在提交 Issue 前请检查

• I searched the issues and didn't found anything relevant | 我已经搜索了 Issues 列表，没有发现于本问题相关内容
• If the patch fails or the image cannot be booted after flashing the new boot.img, visit KernelPatch to clarify your doubts | 修复失败或刷入修补后镜像不能启动，请前往 KernelPatch 提问
• I will upload the bug report file in APatch Manager > Settings > Send logs | 我会上传 Bug Report 文件从 APatch 管理器 > 设置 > 发送日志
• I know how to reproduce the issue, which might not be specific to my device | 我知道如何重新复现这个问题

Version requirements | 版本要求

• I'm using the latest CI version of APatch Manager | 我正在使用最新 CI 版本

Bug description | 描述 Bug

在一加Ace 5 Ultra（天玑9400+）设备上，选择载入KPM模块时，设备会立即卡死，几秒后自动重启，重启后无任何模块载入，功能未生效。因嵌入操作存在风险，暂未尝试嵌入流程，仅在载入环节出现该问题。

On the OnePlus Ace 5 Ultra (Dimensity 9400+), when selecting to load a KPM module, the device freezes immediately, reboots automatically after a few seconds, and no module is loaded with no function taking effect after reboot. Due to the potential risk of embedding operations, the embedding process has not been attempted, and the issue only occurs during the loading process.

Reproduce method | 复现方法

1. 打开APatch应用，选择任意KPM模块执行“载入”操作；
​
2. 操作触发后设备立即卡死，等待约3-5秒后自动重启；
​
3. 重启完成后检查模块状态，确认无任何模块载入且功能未生效。
​
4. Open the APatch app, select any KPM module, and perform the "load" operation;
​
5. The device freezes immediately after the operation is triggered, and automatically reboots after about 3-5 seconds;
​
6. After the reboot is complete, check the module status and confirm that no module is loaded and the function does not take effect.

Expected behavior | 预期行为

希望能修复该bug，使一加Ace 5 Ultra可正常载入KPM模块，十分感谢

Hope this bug can be fixed so that OnePlus Ace 5 Ultra can load KPM modules normally. Thank you very much.

Actual behavior | 实际行为

因其他管理器使用感单一且部分存在功耗过高问题，我选择尝试APatch，听说其有KPM模块特色功能。安装完成后，尝试载入KPM模块时，设备立即卡死，几秒后自动重启；重启进入系统后，打开APatch管理器，无任何模块加载，功能未生效。同系统的一加Ace 5 Pro、标准版（均为骁龙SoC）可正常加载模块，仅我的一加Ace 5 Ultra（天玑9400+ SoC）出现卡死重启的情况。

Due to the monotonous experience of other managers and high power consumption of some, I chose to try APatch, hearing about its featured KPM module function. After installation, when trying to load a KPM module, the device freezes immediately and reboots automatically after a few seconds. After rebooting into the system, opening the APatch manager shows no module loaded and no function takes effect. The OnePlus Ace 5 Pro and Standard Edition (both with Snapdragon SoC) on the same system can load modules normally, while only my OnePlus Ace 5 Ultra (Dimensity 9400+ SoC) has the issue of freezing and rebooting.

Screenshots | 截图

因问题为动态触发（载入模块即重启），无静态报错界面，故无法提供截图。

Since the issue is triggered dynamically (rebooting immediately after loading the module) and there is no static error interface, screenshots cannot be provided.

Logs | 日志

No response

Device name | 设备名称

一加 Ace 5 至尊版（OnePlus Ace 5 Ultra）

OS version | 系统版本

ColorOS 16.0.1（PLC110_16.0.1.300(CN01V120P02)）

APatch version | APatch 版本

基于APatch官方源码分支，FolkPatch 111613 Based on APatch official source code branch, FolkPatch 111613

Kernel version | 内核版本

6.6.66-android15-8-g29d86c5fc9dd-abogki428889875-4k

KernelPatch version | KernelPatch 版本

0.12.3

Other information | 其他信息

“Log file is in .gz format but cannot be selected for upload. The issue occurs when loading KPM module on OnePlus Ace 5 Ultra (Dimensity 9400+), leading to immediate freeze and reboot, with no module loaded after restart.”