Here is a list of all the non printed components with links that worked at one point. If you have any questions about these specific choices, just email and ask!
| Quantity | Item | URL |
|---|---|---|
| 1 | Pi Zero W | |
| 1 | Adafruit Kippah LCD driver (no touch) | https://www.adafruit.com/product/2454 |
| 1 | 7inch LCD Panel (no touch) | https://www.adafruit.com/product/2353 |
| 1 | 40-pin FPC Extension Board + 200mm Cable | https://www.adafruit.com/product/2098 |
| 1 | USB OTG Hub | https://www.amazon.com/gp/product/B01JL837X8 |
| 1 | Battery (4500mah) | https://www.amazon.com/AKZYTUE-4500mAh-Battery-Rechargeable-Connector |
| 1 | Lipo Boost/Charging board | https://www.adafruit.com/product/2465 |
| 1 | SPDT switch | https://www.amazon.com/Qiying-Position-Switch-Solder-SS12F15G3/dp/B08BFB81GD/ |
| 36 | Choc V1 Lopro Switches | https://mkultra.click/choc-switches |
| 36 | Keycaps | https://mkultra.click/mbk-choc-keycaps |
| 36 | Through hole Diodes | https://keeb.io/products/1n4148-diodes |
| 1 | Pro Micro - Any will do here | |
| 1 | Laser cut steel plate | sendcutsend.com |
| 1 | 2.4mm brass rod |
Aside from these items you'll need a variety of M2 screw inserts and screws. The lengths are fungible to some degree, but use the longest you can in most cases just for strength. I didn't do a full count, but here are some good Amazon options that should cover your needs and then some:
Brass metric threaded inserts: https://www.amazon.com/gp/product/B07GLJ7KCJ/
Small metric screws: https://www.amazon.com/gp/product/B01FTI8TM8
Lastly, some lengths of wire, headers, shrikwrap, etc will be needed and useful for the build.