How do I get the working container ff963812e7bb65... ?

[grover77]

I had set this up and it was working great. I tried an image pull, and it broke. :( I added a tag of works to the previous image, referenced that (image: bubuntux/nordvpn:works), and all was good. My best guess is this happened in February. Now my drive crashed, so I have access to the files, but docker is not running. I've tried pulling all the releases listed, but none have the working hash... The new copies don't work either. I know this is a bizarre request, but does anyone know how I can get this exact image, or copy from the old filesystem?

Thanks!
Grover

[grover77]

Here is my docker-compose.yaml:

version: "3.7"
services:

  vpn:
    image: bubuntux/nordvpn:works
    container_name: vpn
    restart: unless-stopped
    network_mode: bridge
    cap_add:
      - NET_ADMIN               # Required
      - SYS_MODULE              # Required for TECHNOLOGY=NordLynx
    sysctls:
      - net.ipv4.conf.all.rp_filter=2
    devices:
      - /dev/net/tun
    environment:
      - USER=<redacted>
      - "PASS=<redacted>"
      - "CONNECT=us -g p2p"
      - TECHNOLOGY=NordLynx
      - NETWORK=192.168.122.0/24
    ulimits:                    # Recommended for High bandwidth scenarios
      memlock:
        soft: -1
        hard: -1
    ports:
      - 9091:9091
      - 8080:8080
      - 80:80
      - 8000:8000

[grover77]

I tried using the reverse proxy config, using v3.10.0-1-1. This is on a fresh install of Ubuntu 21.10. I changed my Nord VPN password, although in the ff96 container the previous pass worked fine. Here's the end of the log with debug trace:

+ mkdir -p /dev/net
+ [[ -c /dev/net/tun ]]
+ mknod -m 0666 /dev/net/tun c 10 200
+ restart_daemon
++ date -Iseconds
+ echo '[2021-11-03T04:51:22+00:00] Restarting the service'
+ service nordvpn stop
[2021-11-03T04:51:22+00:00] Restarting the service
start-stop-daemon: warning: failed to kill 90: No such process
+ rm -rf /run/nordvpn/nordvpnd.sock
+ service nordvpn start
++ date -Iseconds
+ echo '[2021-11-03T04:51:22+00:00] Waiting for the service to start'
+ attempt_counter=0
+ max_attempts=50
+ '[' -S /run/nordvpn/nordvpnd.sock ']'
[2021-11-03T04:51:22+00:00] Waiting for the service to start
+ '[' 0 -eq 50 ']'
+ attempt_counter=1
+ sleep 0.1
+ '[' -S /run/nordvpn/nordvpnd.sock ']'
+ [[ -z <redacted> ]]
++ date -Iseconds
+ echo '[2021-11-03T04:51:22+00:00] Logging in'
+ nordvpn logout
[2021-11-03T04:51:22+00:00] Logging in
+ nordvpn login --username <redacted> --password <redacted>
It's not you, it's us. We're having trouble reaching our servers. If the issue persists, please contact our customer support.
++ date -Iseconds
+ echo '[2021-11-03T04:51:23+00:00] Invalid Username or password.'
+ exit 1
[2021-11-03T04:51:23+00:00] Invalid Username or password.

[grover77]

I figured out that this hash is v1.0. I changed my pass, and now the exact config (except changed password) I've been using for the last 10 months is no longer working. The config is the same, however the old machine was Arch, the new machine is Ubuntu. Now I'm getting

|2021/11/03 05:16:16 some of X-Digest, X-Authorization headers are missing

Is there anything I can do to help debug why the latest version is not working?