Cloud Providers: Openstack
This page details the configuration required for the JASMIN Cloud API to consume projects from an Openstack cloud.
The code for this implementation lives in the jasmin_cloud.provider.openstack module, and interacts with the Openstack API using the Openstack Python SDK.
The following networking configuration is required for each project:
- A project should have a single router.
- A project should have an internal network that is not shared with other projects, with a single subnet.
- The router's external gateway should be connected to an external network where floating IPs can be allocated.
- The router should have an interface connected to the network in (2).
- No other networks should be connected to the router.
All machines provisioned in a project will be attached to the network in (2) as their primary network. The network is located by finding the network attached to the first port where device_owner = 'network:router_interface'. This is only guaranteed to find the network from (2) if (1), (4) and (5) are true.
The following pieces of metadata can be set on an image. If they are not set, the default is used instead.
| Name | Description | Default |
|---|---|---|
jasmin:host_type |
The host type that the image is for. This is passed to the activator script (see below). This is useful if you want to use the same activator script in multiple images with only slight changes in behaviour. |
UNKNOWN |
jasmin:nat_allowed |
Indicates if machines provisioned from the image are permitted to have an external IP. Should be either 0 (not allowed) or 1 (allowed). |
1 |
This metadata can be set in the Horizon UI by navigating to the image list and selecting "Update Metadata" for the image. In the resulting dialog, enter the metadata name in the box labelled "Custom" under "Available Metadata" and click "+". This will cause an entry to appear in the "Existing Metadata" section, where you can enter a value. Once you are happy click "Save".
