paper.tex

% THIS IS AN EXAMPLE DOCUMENT FOR VLDB 2012
% based on ACM SIGPROC-SP.TEX VERSION 2.7
% Modified by  Gerald Weber <gerald@cs.auckland.ac.nz>
% Removed the requirement to include *bbl file in here. (AhmetSacan, Sep2012)
% Fixed the equation on page 3 to prevent line overflow. (AhmetSacan, Sep2012)



\documentclass[sigconf, nonacm]{acmart}

%% The following content must be adapted for the final version
% paper-specific
\newcommand\vldbdoi{XX.XX/XXX.XX}
\newcommand\vldbpages{XXX-XXX}
% issue-specific
\newcommand\vldbvolume{14}
\newcommand\vldbissue{1}
\newcommand\vldbyear{2020}
% should be fine as it is
\newcommand\vldbauthors{\authors}
\newcommand\vldbtitle{\shorttitle} 
% leave empty if no availability url should be set
\newcommand\vldbavailabilityurl{URL_TO_YOUR_ARTIFACTS}
% whether page numbers should be shown or not, use 'plain' for review versions, 'empty' for camera ready
\newcommand\vldbpagestyle{plain} 

% \documentclass{vldb}
% \renewcommand{\baselinestretch}{0.99}
\usepackage{graphicx}
\usepackage{wrapfig}
\usepackage{balance}  % for  \balance command ON LAST PAGE  (only there!)
\usepackage{enumitem}
\usepackage{hyperref, xcolor}
\hypersetup{colorlinks, citecolor=blue}
     %colorlinks=false,
      %citecolor=Violet,
       %linkcolor=Red,
        %urlcolor=Blue}

\usepackage[T1]{fontenc}
\usepackage[utf8]{inputenc}
\usepackage{multirow}
\usepackage{bbding}
\usepackage{pifont}
\newcommand{\cmark}{\ding{51}}
\newcommand{\xmark}{\ding{55}}
\usepackage{wasysym}
\let\Bbbk\relax
\usepackage{amssymb}
\usepackage{array,multirow}
\usepackage{booktabs}
\usepackage{cleveref}
\usepackage{soul}
\usepackage{tikz}
\usetikzlibrary{arrows.meta,positioning,calc,decorations.pathreplacing,shapes.geometric}
\newcommand{\cstep}[1]{\tikz[baseline=-0.5ex]{\node[circle,fill=black!70,text=white,inner sep=0pt,minimum size=8pt,font=\fontsize{5.5}{6}\selectfont\bfseries]{#1};}}

% \crefformat{section}{\S#2#1#3} % see manual of cleveref, section 8.2.1
% \crefformat{subsection}{\S#2#1#3}
% \crefformat{subsubsection}{\S#2#1#3}

\usepackage{url}
\usepackage{algorithm}
% \usepackage{balance}

% \newcommand\longvar[1]{\mathchardef\UrlBreakPenalty=100
% 	\mathchardef\UrlBigBreakPenalty=100\url{#1}}

% \makeatletter
% \newcommand{\printfnsymbol}[1]{%
%   \textsuperscript{\@fnsymbol{#1}}%
% }
% \makeatother

\newcommand{\yacov}[1]{\textcolor{blue}{$\ll${Yacov: #1}$\gg$}}


% allow slight stretch to avoid overfull hboxes without full \sloppy
\emergencystretch=1em

\begin{document}

% ****************** TITLE ****************************************

\title{Private Data Collections: Enabling Data Privacy in Permissioned Blockchains [Industry]}
% \author[1]{} %\thanks{contributed equally} } 
% \author[1]{} %\printfnsymbol{1}}
% \author[1]{} % \printfnsymbol{1}}
% \author[2]{}
% \author[1]{}
% \affil[ ]{}
% \affil[ ]{}
% \author{
% 	Senthil Nathan, Chander Govindarajan, Adarsh Saraf, Manish Sethi, Praveen Jayachandran\\
% 	\affaddr{IBM Research}
% }
% possible, but not really needed or used for PVLDB:
%\subtitle{[Extended Abstract]
%\titlenote{A full version of this paper is available as\textit{Author's Guide to Preparing ACM SIG Proceedings Using \LaTeX$2_\epsilon$\ and BibTeX} at \texttt{www.acm.org/eaddress.htm}}}

% ****************** AUTHORS **************************************

% You need the command \numberofauthors to handle the 'placement
% and alignment' of the authors beneath the title.
%
% For aesthetic reasons, we recommend 'three authors at a time'
% i.e. three 'name/affiliation blocks' be placed beneath the title.
%
% NOTE: You are NOT restricted in how many 'rows' of
% "name/affiliations" may appear. We just ask that you restrict
% the number of 'columns' to three.
%
% Because of the available 'opening page real-estate'
% we ask you to refrain from putting more than six authors
% (two rows with three columns) beneath the article title.
% More than six makes the first-page appear very cluttered indeed.
%
% Use the \alignauthor commands to handle the names
% and affiliations for an 'aesthetic maximum' of six authors.
% Add names, affiliations, addresses for
% the seventh etc. author(s) as the argument for the
% \additionalauthors command.
% These 'additional authors' will be output/set for you
% without further effort on your part as the last section in
% the body of your article BEFORE References or any Appendices.

%\numberofauthors{4} %  in this sample file, there are a *total*
% of EIGHT authors. SIX appear on the 'first-page' (for formatting
% reasons) and the remaining two appear in the \additionalauthors section.

%\author{
% You can go ahead and credit any number of authors here,
% e.g. one 'row of three' or two rows (consisting of one row of three
% and a second row of one, two or three).
%
% The command \alignauthor (no curly braces needed) should
% precede each author name, affiliation/snail-mail address and
% e-mail address. Additionally, tag each line of
% affiliation/address with \affaddr, and tag the
% e-mail address with \email.
%
% 1st. author
%\alignauthor
%
%Ben Trovato\titlenote{Dr.~Trovato insisted his name be first.}\\
%       \affaddr{Institute for Clarity in Documentation}\\
%       \affaddr{1932 Wallamaloo Lane}\\
%       \affaddr{Wallamaloo, New Zealand}\\
%       \email{trovato@corporation.com}
%% 2nd. author
%\alignauthor
%G.K.M. Tobin\titlenote{The secretary disavows
%any knowledge of this author's actions.}\\
%       \affaddr{Institute for Clarity in Documentation}\\
%       \affaddr{P.O. Box 1212}\\
%       \affaddr{Dublin, Ohio 43017-6221}\\
%       \email{webmaster@marysville-ohio.com}
% 3rd. author
%\alignauthor Lars Th{\Large{\sf{\o}}}rv{$\ddot{\mbox{a}}$}ld\titlenote{This author is the
%one who did all the really hard work.}\\
%       \affaddr{The Th{\large{\sf{\o}}}rv{$\ddot{\mbox{a}}$}ld Group}\\
%       \affaddr{1 Th{\large{\sf{\o}}}rv{$\ddot{\mbox{a}}$}ld Circle}\\
%       \affaddr{Hekla, Iceland}\\
%       \email{larst@affiliation.org}
%\and  % use '\and' if you need 'another row' of author names
%% 4th. author
%\alignauthor Lawrence P. Leipuner\\
%       \affaddr{Brookhaven Laboratories}\\
%       \affaddr{Brookhaven National Lab}\\
%       \affaddr{P.O. Box 5000}\\

%       \email{lleipuner@researchlabs.org}
% There's nothing stopping you putting the seventh, eighth, etc.
% author on the opening page (as the 'third row') but we ask,
% for aesthetic reasons that you place these 'additional authors'
% in the \additional authors block, viz.
% Just remember to make sure that the TOTAL number of authors
% is the number that will appear on the first page PLUS the
% number that will appear in the \additionalauthors section.
%}

\author{Senthilnathan Natarajan, Manish Sethi, Dave Enyeart, Yacov Manevich, Artem Barger}
\affiliation{\institution{IBM Research}}

% \author{Manish Sethi}
% \affiliation{\institution{IBM Research}}
%
% \author{Dave Enyeart}
% \affiliation{\institution{IBM Research}}
%
% \author{Yacov Manevich}
% \affiliation{\institution{IBM Research}}
%
% \author{Artem Barger}
% \affiliation{\institution{IBM Research}}
\thanks{Yacov Manevich is now at Ava Labs. Artem Barger is now at Modelyo.}


\input{sections/abstract.tex}

\maketitle

%%% do not modify the following VLDB block %%
%%% VLDB block start %%%
\pagestyle{\vldbpagestyle}
\begingroup\small\noindent\raggedright\textbf{PVLDB Reference Format:}\\
\vldbauthors. \vldbtitle. PVLDB, \vldbvolume(\vldbissue): \vldbpages, \vldbyear.\\
\href{https://doi.org/\vldbdoi}{doi:\vldbdoi}
\endgroup
\begingroup
\renewcommand\thefootnote{}\footnote{\noindent
This work is licensed under the Creative Commons BY-NC-ND 4.0 International License. Visit \url{https://creativecommons.org/licenses/by-nc-nd/4.0/} to view a copy of this license. For any use beyond those covered by this license, obtain permission by emailing \href{mailto:info@vldb.org}{info@vldb.org}. Copyright is held by the owner/author(s). Publication rights licensed to the VLDB Endowment. \\
\raggedright Proceedings of the VLDB Endowment, Vol. \vldbvolume, No. \vldbissue\ %
ISSN 2150-8097. \\
\href{https://doi.org/\vldbdoi}{doi:\vldbdoi} \\
}\addtocounter{footnote}{-1}\endgroup
%%% VLDB block end %%%

%%% do not modify the following VLDB block %%
%%% VLDB block start %%%
\ifdefempty{\vldbavailabilityurl}{}{
% \begingroup\small\noindent\raggedright\textbf{PVLDB Artifact Availability:}\\
% The source code, data, and/or other artifacts have been made available at \url{\vldbavailabilityurl}.
% \endgroup
}
%%% VLDB block end %%%

\input{sections/introduction.tex}

\input{sections/motivation.tex}

\input{sections/core-idea.tex}

% \input{sections/design-public-ledger.tex}

\input{sections/design-private-ledger.tex}

% \input{sections/gossip-protocol.tex}

% \input{sections/design-gossip.tex}

\input{sections/threat-model.tex}

\input{sections/implementation.tex}

\input{sections/evaluation.tex}

\input{sections/real-world-impact.tex}

\input{sections/lessons-learned.tex}

\input{sections/related-work.tex}

\input{sections/conclusion.tex}

% The following two commands are all you need in the
% initial runs of your .tex file to
% produce the bibliography for the citations in your paper.
\balance
\bibliographystyle{abbrv}
\bibliography{paper}  % vldb_sample.bib is the name of the Bibliography in this case
% You must have a proper ".bib" file
%  and remember to run:
% latex bibtex latex latex
% to resolve all references

\end{document}
%%% Local Variables:
%%% mode: latex
%%% TeX-master: t
%%% End: