| Test name | Specification section |
|---|---|
| ccc_bc_rstdaa | 5.1.9.3.3 Reset Dynamic Address Assignment (RSTDAA) |
| ccc_dc_rstdaa | 5.1.9.3.3 Reset Dynamic Address Assignment (RSTDAA) |
| ccc_defslvs | 5.1.9.3.7 Define List of Slaves (DEFSLVS) |
| ccc_getmrl | 5.1.9.3.6 Set/Get Max Read Length (SETMRL/GETMRL) |
| ccc_getmwl | 5.1.9.3.5 Set/Get Max Write Length (SETMWL/GETMWL) |
| ccc_getmxds | 5.1.9.3.18 Get Max Data Speed (GETMXDS) |
| ccc_getxtime | 5.1.9.3.21 Get Exchange Timing Support Information (GETXTIME) |
| ccc_setbrgtgt | 5.1.9.3.17 Set Bridge Targets (SETBRGTGT) |
| ccc_setmwl | 5.1.9.3.5 Set/Get Max Write Length (SETMWL/GETMWL) |
| ccc_setnewda | 5.1.9.3.11 Set New Dynamic Address (SETNEWDA) |
| ccc_setxtime | 5.1.9.3.20 Set Exchange Timing Information (SETXTIME) |
| ibi_no_payload | 5.1.6 In-Band Interrupt 5.1.6.2 I3C Slave Interrupt Request |
| ibi_payload | 5.1.6 In-Band Interrupt 5.1.6.2 I3C Slave Interrupt Request |
| tc_sync | 5.1.8.2 Synchronous Systems and Events |
| ccc_bc_setaasa | 5.1.9.3.22 Set All Addresses to Static Address (SETAASA) |
| slv_no_rst | 5.1.11 Slave Reset 5.1.11.1 Theory of Operation 5.1.11.2 RSTACT CCC |
| slv_rst | 5.1.11 Slave Reset 5.1.11.3 Slave Reset Pattern |
| pvt_read | 5.1.2.3.3 Ninth Bit of SDR Slave Returned (Read) Data as End-of-Data |
| pvt_write | 5.1.2.3.1 Transition from Address ACK to SDR Master Write Data |
| slv_intr_req | 5.1.6 In-Band Interrupt 5.1.6.2 I3C Slave Interrupt Request |
| slv_addr_arb | 5.1.2.2.1 I3C Address Arbitration 5.1.6 In-Band Interrupt |