-
Notifications
You must be signed in to change notification settings - Fork 13
8‐2 Add Commands
You can execute the following "add" command from the CLI.
python [file path]/network_sketcher.py [command] --master [master file path]- The part marked as [command] 、--master [master file path] below can be modified.
python [file path]/network_sketcher.py -master [master file path] [command]
This process allows you to create an IP address for a Layer 3 interface. You can create one IP address at a time; by repeating the process, you can add multiple IP addresses.
python [file path]/network_sketcher.py add ip_address [hostname] [layer3_portname] [ip_address/subnetmask] --master [master file path] - ex.
+BEFORE+
#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW2', 'Vlan 100', '', '']
+IP Address added+
＃python .\network_sketcher.py add ip_address 'L3SW2' 'Vlan 100' '192.168.100.100/24' --master "C:\work\[MASTER]test.xlsx"
--- IP Address added --- L3SW2,Vlan 100,192.168.100.100/24
+AFTER+
#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW2', 'Vlan 100', '', '192.168.100.100/24']
This feature allows you to create Layer 2 segments (such as VLANs) on the interface. You can create one Layer 2 segment at a time, and multiple Layer 2 segments can be created.
python [file path]/network_sketcher.py add ip_address [hostname] [layer2_portname] [l2segment_name] --master [master file path] - ex.
+BEFORE+
#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW2', 'GigabitEthernet 0/0', '', 'Vlan100,Vlan200,Vlan300', '']
+l2_segment added+
＃python .\network_sketcher.py add l2_segment 'L3SW2' 'GigabitEthernet 0/0' 'addvlan999' --master "C:\work\[MASTER]test.xlsx"
--- l2 Segment added --- L3SW2,GigabitEthernet 0/0,addvlan999
+AFTER+
#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW2', 'GigabitEthernet 0/0', '', 'Vlan100,Vlan200,Vlan300,addvlan999', '']
We will create Layer 3 interfaces, such as VLAN interfaces (SVIs).
python [file path]/network_sketcher.py add virtual_port [hostname] [virtual_portname] --master [master file path] - ex.
+BEFORE+
#python .\network_sketcher.py show l2_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW2', '', 'Vlan 300', 'Vlan300', '']
#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW2', 'Vlan 300', '', '']
+virtual_port added+
＃python .\network_sketcher.py add l2_segment 'L3SW2' 'GigabitEthernet 0/0' 'addvlan999' --master "C:\work\[MASTER]test.xlsx"
--- Virtual Port added --- L3SW2,addvlan 999
+AFTER+
#python .\network_sketcher.py show l2_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW2', '', 'addvlan 999', '', '']
['L3SW2', '', 'Vlan 100', 'Vlan100', '']
#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW2', 'Vlan 300', '', '']
['L3SW2', 'addvlan 999', '', '']
- Yusuke Ogawa - Security Architect, Cisco | CCIE#17583
SPDX-License-Identifier: Apache-2.0
Copyright 2023 Cisco Systems, Inc. and its affiliates
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.