8‐4. Rename Commands_jp

Masterファイルを直接編集するため、実行前に必ずMasterファイルをバックアップしてください。

本手順でできること

CLIから以下のrenameコマンドを実行できます

• rename area
• rename device
• rename l3_instance
• rename port

基本構文

python [file path]/network_sketcher.py [command] --master [master file path]

• 以下のように[command] 、--master [master file path]　の場所は変更可能
  python [file path]/network_sketcher.py -master [master file path] [command]
  

rename area

エリア名を変更します。

python [file path]/network_sketcher.py rename area [Original area name] [Updated area name] --master [master file path] 

• ex.
  

+BEFORE+
#python .\network_sketcher.py show area --master "C:\work\[MASTER]test.xlsx"
Area1
Area2
Area3

+Device renamed+
＃python .\network_sketcher.py rename area 'Area3' 'Area99' --master "C:\work\[MASTER]test.xlsx"
--- Area renamed --- Area3 -> Area99

+AFTER+
#python .\network_sketcher.py show area --master "C:\work\[MASTER]test.xlsx"
Area1
Area2
Area99

rename device

デバイス名を変更します。

python [file path]/network_sketcher.py rename device [Original device name] [Updated device name] --master [master file path] 

• ex.
  

+BEFORE+
#python .\network_sketcher.py show device --master "C:\work\[MASTER]test.xlsx"
L3SW1
L3SW2

+Device renamed+
＃python .\network_sketcher.py rename device 'L3SW1' 'L3SW100' --master "C:\work\[MASTER]test.xlsx"
--- Device Name renamed --- L3SW1 -> L3SW100

+AFTER+
#python .\network_sketcher.py show device --master "C:\work\[MASTER]test.xlsx"
L3SW100
L3SW2

rename l3_instance

レイヤ3インタフェースが所属するVRFのようなl3_instanceを変更します。デフォルトでは全てのレイヤ３インタフェースはDefaultを意味する空欄''が設定されています。仮に１つのレイヤ３インターフェースのl3_instance名を変更すると、空欄''が設定されているその他全てのl3_instanceはDefaultのl3_instanceが設定された状態と同じ意味となります。

python [file path]/network_sketcher.py rename l3_instance [device name] [layer3 port name] [Renamed l3_instance name] --master [master file path] 

• ex.
  

+BEFORE+
#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['devcie1', 'GigabitEthernet 0/0', '', '']

+l3_interface renamed+
＃python .\network_sketcher.py rename l3_instance 'devcie1' 'GigabitEthernet 0/0' 'VRF-1' --master "C:\work\[MASTER]test.xlsx"
--- l3 instance renamed --- devcie1,GigabitEthernet 0/0,VRF-10

+AFTER+
#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['devcie1', 'GigabitEthernet 0/0', 'VRF-1', '']

rename port

ポート名及びポート番号を変更します。

python [file path]/network_sketcher.py rename port [device name] [Original port name] [Updated port name] --master [master file path] 

• ex.
  

+BEFORE+
#python .\network_sketcher.py show l1_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW1', 'GE 0/0', 'GigabitEthernet 0/0', 'Auto', 'Auto', '1000BASE-T']
['L3SW2', 'GE 0/0', 'GigabitEthernet 0/0', 'Auto', 'Auto', '1000BASE-T']

#python .\network_sketcher.py show l2_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW1', '', 'Vlan 201', 'Vlan100', '']
['L3SW1', '', 'Vlan 200', 'Vlan200', '']
['L3SW1', '', 'Vlan 300', 'Vlan300', '']
['L3SW1', 'GigabitEthernet 0/0', '', 'Vlan100,Vlan200,Vlan300', '']
['L3SW2', '', 'addvlan 999', '', '']
['L3SW2', '', 'Vlan 201', 'Vlan100', '']
['L3SW2', '', 'Vlan 200', 'Vlan200', '']
['L3SW2', '', 'Vlan 202', 'Vlan300', '']
['L3SW2', 'GigabitEthernet 0/0', '', 'Vlan100,Vlan200,Vlan300', '']

#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW1', 'Vlan 201', '', '']
['L3SW1', 'Vlan 200', '', '']
['L3SW1', 'Vlan 300', '', '']
['L3SW2', 'Vlan 201', '', '']
['L3SW2', 'Vlan 200', '', '']
['L3SW2', 'Vlan 202', '', '']
['L3SW2', 'addvlan 999', '', '']

+Port renamed+
＃python .\network_sketcher.py rename port 'L3SW1' 'GigabitEthernet 0/0' 'FastEthernet 1/1' --master "C:\work\[MASTER]test.xlsx"
--- Physical Port Name renamed --- L3SW1 GigabitEthernet 0/0 -> FastEthernet 1/1

＃python .\network_sketcher.py rename port 'L3SW2' 'Vlan 200' 'Vlan 999' --master "C:\work\[MASTER]test.xlsx"
--- Virtual Port Name renamed --- L3SW2 Vlan 200 -> Vlan 999

+AFTER+
#python .\network_sketcher.py show l1_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW1', 'FE 1/1', 'FastEthernet 1/1', 'Auto', 'Auto', '1000BASE-T']
['L3SW2', 'GE 0/0', 'GigabitEthernet 0/0', 'Auto', 'Auto', '1000BASE-T']

#python .\network_sketcher.py show l2_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW1', '', 'Vlan 201', 'Vlan100', '']
['L3SW1', '', 'Vlan 200', 'Vlan200', '']
['L3SW1', '', 'Vlan 300', 'Vlan300', '']
['L3SW1', 'FastEthernet 1/1', '', 'Vlan100,Vlan200,Vlan300', '']
['L3SW2', '', 'addvlan 999', '', '']
['L3SW2', '', 'Vlan 201', 'Vlan100', '']
['L3SW2', '', 'Vlan 999', 'Vlan200', '']
['L3SW2', '', 'Vlan 202', 'Vlan300', '']
['L3SW2', 'GigabitEthernet 0/0', '', 'Vlan100,Vlan200,Vlan300', '']

#python .\network_sketcher.py show l3_interface --master "C:\work\[MASTER]test.xlsx"
['L3SW1', 'Vlan 201', '', '']
['L3SW1', 'Vlan 200', '', '']
['L3SW1', 'Vlan 300', '', '']
['L3SW2', 'Vlan 201', '', '']
['L3SW2', 'Vlan 999', '', '']
['L3SW2', 'Vlan 202', '', '']
['L3SW2', 'addvlan 999', '', '']