Merge back thermal control material for v6.1.

Author: rafaeljw

Documentation/atomic_bitops.txt

@@ -59,7 +59,7 @@ Like with atomic_t, the rule of thumb is:
  - RMW operations that have a return value are fully ordered.
 
  - RMW operations that are conditional are unordered on FAILURE,
-   otherwise the above rules apply. In the case of test_and_{}_bit() operations,
+   otherwise the above rules apply. In the case of test_and_set_bit_lock(),
    if the bit in memory is unchanged by the operation then it is deemed to have
    failed.
 

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml

@@ -233,6 +233,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-lcd
               - allwinner,sun8i-v3s-tcon
               - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
@@ -252,6 +253,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-tv
               - allwinner,sun8i-r40-tcon-tv
               - allwinner,sun9i-a80-tcon-tv
+              - allwinner,sun20i-d1-tcon-tv
 
     then:
       properties:
@@ -278,6 +280,7 @@ allOf:
               - allwinner,sun9i-a80-tcon-lcd
               - allwinner,sun4i-a10-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       required:
@@ -294,6 +297,7 @@ allOf:
               - allwinner,sun8i-a23-tcon
               - allwinner,sun8i-a33-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:

Documentation/devicetree/bindings/net/qcom-emac.txt

@@ -14,7 +14,7 @@ MAC node:
 - mac-address : The 6-byte MAC address. If present, it is the default
 	MAC address.
 - internal-phy : phandle to the internal PHY node
-- phy-handle : phandle the external PHY node
+- phy-handle : phandle to the external PHY node
 
 Internal PHY node:
 - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".

Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml

@@ -47,12 +47,6 @@ properties:
         description:
           Properties for single LDO regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^LDO[1-5]$"
-            description:
-              should be "LDO1", ..., "LDO5"
-
         unevaluatedProperties: false
 
       "^BUCK[1-6]$":
@@ -62,11 +56,6 @@ properties:
           Properties for single BUCK regulator.
 
         properties:
-          regulator-name:
-            pattern: "^BUCK[1-6]$"
-            description:
-              should be "BUCK1", ..., "BUCK6"
-
           nxp,dvs-run-voltage:
             $ref: "/schemas/types.yaml#/definitions/uint32"
             minimum: 600000

Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml

@@ -10,7 +10,7 @@ description:
   See spi-peripheral-props.yaml for more info.
 
 maintainers:
-  - Pratyush Yadav <p.yadav@ti.com>
+  - Vaishnav Achath <vaishnav.a@ti.com>
 
 properties:
   # cdns,qspi-nor.yaml

Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cadence Quad SPI controller
 
 maintainers:
-  - Pratyush Yadav <p.yadav@ti.com>
+  - Vaishnav Achath <vaishnav.a@ti.com>
 
 allOf:
   - $ref: spi-controller.yaml#

Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml

@@ -16,7 +16,7 @@ description:
   their own separate schema that should be referenced from here.
 
 maintainers:
-  - Pratyush Yadav <[email protected]>
+  - Mark Brown <[email protected]>
 
 properties:
   reg:

Documentation/devicetree/bindings/thermal/rcar-thermal.yaml

@@ -42,7 +42,7 @@ properties:
     description:
       Address ranges of the thermal registers. If more then one range is given
       the first one must be the common registers followed by each sensor
-      according the datasheet.
+      according to the datasheet.
     minItems: 1
     maxItems: 4
 

Documentation/kbuild/kconfig-language.rst

@@ -525,8 +525,8 @@ followed by a test macro::
 If you need to expose a compiler capability to makefiles and/or C source files,
 `CC_HAS_` is the recommended prefix for the config option::
 
-  config CC_HAS_ASM_GOTO
-	def_bool $(success,$(srctree)/scripts/gcc-goto.sh $(CC))
+  config CC_HAS_FOO
+	def_bool $(success,$(srctree)/scripts/cc-check-foo.sh $(CC))
 
 Build as module only
 ~~~~~~~~~~~~~~~~~~~~

Documentation/tools/rtla/rtla-timerlat-hist.rst

@@ -33,7 +33,7 @@ EXAMPLE
 =======
 In the example below, **rtla timerlat hist** is set to run for *10* minutes,
 in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat
-hist** will change the priority of the *timelat* threads to run under
+hist** will change the priority of the *timerlat* threads to run under
 *SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The
 *1ms* period is also passed to the *timerlat* tracer::