soundwire: intel: add bus management callbacks in hw_ops

No functionality change, only add indirection for bus management
helpers.

Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

Author: plbossart

drivers/soundwire/intel.c

@@ -1428,6 +1428,12 @@ const struct sdw_intel_hw_ops sdw_intel_cnl_hw_ops = {
 
 	.register_dai = intel_register_dai,
 
+	.check_clock_stop = intel_check_clock_stop,
+	.start_bus = intel_start_bus,
+	.start_bus_after_reset = intel_start_bus_after_reset,
+	.start_bus_after_clock_stop = intel_start_bus_after_clock_stop,
+	.stop_bus = intel_stop_bus,
+
 	.pre_bank_switch = intel_pre_bank_switch,
 	.post_bank_switch = intel_post_bank_switch,
 };
@@ -1622,7 +1628,7 @@ int intel_link_startup(struct auxiliary_device *auxdev)
 	sdw_intel_debugfs_init(sdw);
 
 	/* start bus */
-	ret = intel_start_bus(sdw);
+	ret = sdw_intel_start_bus(sdw);
 	if (ret) {
 		dev_err(dev, "bus start failed: %d\n", ret);
 		goto err_power_up;
@@ -1850,7 +1856,7 @@ static int __maybe_unused intel_suspend(struct device *dev)
 		return 0;
 	}
 
-	ret = intel_stop_bus(sdw, false);
+	ret = sdw_intel_stop_bus(sdw, false);
 	if (ret < 0) {
 		dev_err(dev, "%s: cannot stop bus: %d\n", __func__, ret);
 		return ret;
@@ -1876,14 +1882,14 @@ static int __maybe_unused intel_suspend_runtime(struct device *dev)
 	clock_stop_quirks = sdw->link_res->clock_stop_quirks;
 
 	if (clock_stop_quirks & SDW_INTEL_CLK_STOP_TEARDOWN) {
-		ret = intel_stop_bus(sdw, false);
+		ret = sdw_intel_stop_bus(sdw, false);
 		if (ret < 0) {
 			dev_err(dev, "%s: cannot stop bus during teardown: %d\n",
 				__func__, ret);
 			return ret;
 		}
 	} else if (clock_stop_quirks & SDW_INTEL_CLK_STOP_BUS_RESET || !clock_stop_quirks) {
-		ret = intel_stop_bus(sdw, true);
+		ret = sdw_intel_stop_bus(sdw, true);
 		if (ret < 0) {
 			dev_err(dev, "%s: cannot stop bus during clock_stop: %d\n",
 				__func__, ret);
@@ -1941,7 +1947,7 @@ static int __maybe_unused intel_resume(struct device *dev)
 	 */
 	sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET);
 
-	ret = intel_start_bus(sdw);
+	ret = sdw_intel_start_bus(sdw);
 	if (ret < 0) {
 		dev_err(dev, "cannot start bus during resume\n");
 		intel_link_power_down(sdw);
@@ -1995,7 +2001,7 @@ static int __maybe_unused intel_resume_runtime(struct device *dev)
 		 */
 		sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET);
 
-		ret = intel_start_bus(sdw);
+		ret = sdw_intel_start_bus(sdw);
 		if (ret < 0) {
 			dev_err(dev, "%s: cannot start bus after teardown: %d\n", __func__, ret);
 			intel_link_power_down(sdw);
@@ -2010,23 +2016,23 @@ static int __maybe_unused intel_resume_runtime(struct device *dev)
 			return ret;
 		}
 
-		ret = intel_start_bus_after_reset(sdw);
+		ret = sdw_intel_start_bus_after_reset(sdw);
 		if (ret < 0) {
 			dev_err(dev, "%s: cannot start bus after reset: %d\n", __func__, ret);
 			intel_link_power_down(sdw);
 			return ret;
 		}
 	} else if (!clock_stop_quirks) {
 
-		intel_check_clock_stop(sdw);
+		sdw_intel_check_clock_stop(sdw);
 
 		ret = intel_link_power_up(sdw);
 		if (ret) {
 			dev_err(dev, "%s: power_up failed: %d\n", __func__, ret);
 			return ret;
 		}
 
-		ret = intel_start_bus_after_clock_stop(sdw);
+		ret = sdw_intel_start_bus_after_clock_stop(sdw);
 		if (ret < 0) {
 			dev_err(dev, "%s: cannot start bus after clock stop: %d\n", __func__, ret);
 			intel_link_power_down(sdw);

drivers/soundwire/intel.h

@@ -84,4 +84,38 @@ static inline int sdw_intel_register_dai(struct sdw_intel *sdw)
 	return -ENOTSUPP;
 }
 
+static inline void sdw_intel_check_clock_stop(struct sdw_intel *sdw)
+{
+	if (SDW_INTEL_CHECK_OPS(sdw, check_clock_stop))
+		SDW_INTEL_OPS(sdw, check_clock_stop)(sdw);
+}
+
+static inline int sdw_intel_start_bus(struct sdw_intel *sdw)
+{
+	if (SDW_INTEL_CHECK_OPS(sdw, start_bus))
+		return SDW_INTEL_OPS(sdw, start_bus)(sdw);
+	return -ENOTSUPP;
+}
+
+static inline int sdw_intel_start_bus_after_reset(struct sdw_intel *sdw)
+{
+	if (SDW_INTEL_CHECK_OPS(sdw, start_bus_after_reset))
+		return SDW_INTEL_OPS(sdw, start_bus_after_reset)(sdw);
+	return -ENOTSUPP;
+}
+
+static inline int sdw_intel_start_bus_after_clock_stop(struct sdw_intel *sdw)
+{
+	if (SDW_INTEL_CHECK_OPS(sdw, start_bus_after_clock_stop))
+		return SDW_INTEL_OPS(sdw, start_bus_after_clock_stop)(sdw);
+	return -ENOTSUPP;
+}
+
+static inline int sdw_intel_stop_bus(struct sdw_intel *sdw, bool clock_stop)
+{
+	if (SDW_INTEL_CHECK_OPS(sdw, stop_bus))
+		return SDW_INTEL_OPS(sdw, stop_bus)(sdw, clock_stop);
+	return -ENOTSUPP;
+}
+
 #endif /* __SDW_INTEL_LOCAL_H */

include/linux/soundwire/sdw_intel.h

@@ -300,6 +300,11 @@ struct sdw_intel;
  * @debugfs_init: initialize all debugfs capabilities
  * @debugfs_exit: close and cleanup debugfs capabilities
  * @register_dai: read all PDI information and register DAIs
+ * @check_clock_stop: throw error message if clock is not stopped.
+ * @start_bus: normal start
+ * @start_bus_after_reset: start after reset
+ * @start_bus_after_clock_stop: start after mode0 clock stop
+ * @stop_bus: stop all bus
  * @pre_bank_switch: helper for bus management
  * @post_bank_switch: helper for bus management
  */
@@ -309,6 +314,12 @@ struct sdw_intel_hw_ops {
 
 	int (*register_dai)(struct sdw_intel *sdw);
 
+	void (*check_clock_stop)(struct sdw_intel *sdw);
+	int (*start_bus)(struct sdw_intel *sdw);
+	int (*start_bus_after_reset)(struct sdw_intel *sdw);
+	int (*start_bus_after_clock_stop)(struct sdw_intel *sdw);
+	int (*stop_bus)(struct sdw_intel *sdw, bool clock_stop);
+
 	int (*pre_bank_switch)(struct sdw_intel *sdw);
 	int (*post_bank_switch)(struct sdw_intel *sdw);
 };