serial: 8250_dma: Fix DMA Rx rearm race

As DMA Rx can be completed from two places, it is possible that DMA Rx
completes before DMA completion callback had a chance to complete it.
Once the previous DMA Rx has been completed, a new one can be started
on the next UART interrupt. The following race is possible
(uart_unlock_and_check_sysrq_irqrestore() replaced with
spin_unlock_irqrestore() for simplicity/clarity):

CPU0					CPU1
					dma_rx_complete()
serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma_flush()
      __dma_rx_complete()
        dma->rx_running = 0
        // Complete DMA Rx
  spin_unlock_irqrestore(&port->lock)

serial8250_handle_irq()
  spin_lock_irqsave(&port->lock)
  handle_rx_dma()
    serial8250_rx_dma()
      dma->rx_running = 1
      // Setup a new DMA Rx
  spin_unlock_irqrestore(&port->lock)

					  spin_lock_irqsave(&port->lock)
					  // sees dma->rx_running = 1
					  __dma_rx_complete()
					    dma->rx_running = 0
					    // Incorrectly complete
					    // running DMA Rx

This race seems somewhat theoretical to occur for real but handle it
correctly regardless. Check what is the DMA status before complething
anything in __dma_rx_complete().

Reported-by: Gilles BULOZ <[email protected]>
Tested-by: Gilles BULOZ <[email protected]>
Fixes: 9ee4b83 ("serial: 8250: Add support for dmaengine")
Cc: [email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: ij-intel

drivers/tty/serial/8250/8250_dma.c

@@ -43,15 +43,23 @@ static void __dma_rx_complete(struct uart_8250_port *p)
 	struct uart_8250_dma	*dma = p->dma;
 	struct tty_port		*tty_port = &p->port.state->port;
 	struct dma_tx_state	state;
+	enum dma_status		dma_status;
 	int			count;
 
-	dma->rx_running = 0;
-	dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
+	/*
+	 * New DMA Rx can be started during the completion handler before it
+	 * could acquire port's lock and it might still be ongoing. Don't to
+	 * anything in such case.
+	 */
+	dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
+	if (dma_status == DMA_IN_PROGRESS)
+		return;
 
 	count = dma->rx_size - state.residue;
 
 	tty_insert_flip_string(tty_port, dma->rx_buf, count);
 	p->port.icount.rx += count;
+	dma->rx_running = 0;
 
 	tty_flip_buffer_push(tty_port);
 }