Merge tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:
 "There's still a handful of new features in here, but there are a lot
  of fixes/cleanups as well:

   - Support for the Zicbom extension for explicit cache-block
     management, along with the necessary bits to make the non-standard
     cache management ops on the Allwinner D1 function

   - Support for the Zihintpause extension, which codifies a go-slow
     instruction used for cpu_relax()

   - Support for the Sstc extension for supervisor-mode timer/counter
     management

   - Many device tree fixes and cleanups, including a large set for the
     Canaan device trees

   - A handful of fixes and cleanups for the PMU driver"

* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
  dt-bindings: gpio: sifive: add gpio-line-names
  wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
  RISC-V: KVM: Support sstc extension
  RISC-V: Improve SBI definitions
  RISC-V: Move counter info definition to sbi header file
  RISC-V: Fix SBI PMU calls for RV32
  RISC-V: Update user page mapping only once during start
  RISC-V: Fix counter restart during overflow for RV32
  RISC-V: Prefer sstc extension if available
  RISC-V: Enable sstc extension parsing from DT
  RISC-V: Add SSTC extension CSR details
  riscv:uprobe fix SR_SPIE set/clear handling
  dt-bindings: riscv: fix SiFive l2-cache's cache-sets
  riscv: ensure cpu_ops_sbi is declared
  RISC-V: cpu_ops_spinwait.c should include head.h
  RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
  riscv: dts: starfive: correct number of external interrupts
  riscv: dts: sifive unmatched: Add PWM controlled LEDs
  riscv/purgatory: Omit use of bin2c
  riscv/purgatory: hard-code obj-y in Makefile
  ...

Author: torvalds

Documentation/devicetree/bindings/display/ilitek,ili9341.txt

@@ -21,8 +21,10 @@ properties:
   compatible:
     items:
       - enum:
+          - adafruit,yx240qv29
           # ili9341 240*320 Color on stm32f429-disco board
           - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
       - const: ilitek,ili9341
 
   reg: true
@@ -47,31 +49,50 @@ properties:
   vddi-led-supply:
     description: Voltage supply for the LED driver (1.65 .. 3.3 V)
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - dc-gpios
-  - port
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
 
 examples:
   - |+
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
         panel: display@0 {
-                 compatible = "st,sf-tc240t-9370-t",
-                              "ilitek,ili9341";
-                 reg = <0>;
-                 spi-3wire;
-                 spi-max-frequency = <10000000>;
-                 dc-gpios = <&gpiod 13 0>;
-                 port {
-                         panel_in: endpoint {
-                           remote-endpoint = <&display_out>;
-                      };
-                 };
-             };
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
         };
+    };
 ...

Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml

@@ -46,6 +46,10 @@ properties:
     maximum: 32
     default: 16
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
   gpio-controller: true
 
 required:

Documentation/devicetree/bindings/gpio/sifive,gpio.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K210 SRAM memory controller
+
+description:
+  The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB
+  of SRAM. The controller is initialised by the bootloader, which configures
+  its clocks, before OS bringup.
+
+maintainers:
+  - Conor Dooley <[email protected]>
+
+properties:
+  compatible:
+    enum:
+      - canaan,k210-sram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: sram0 clock
+      - description: sram1 clock
+      - description: aisram clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sram0
+      - const: sram1
+      - const: aisram
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    memory-controller {
+        compatible = "canaan,k210-sram";
+        clocks = <&sysclk K210_CLK_SRAM0>,
+                 <&sysclk K210_CLK_SRAM1>,
+                 <&sysclk K210_CLK_AI>;
+        clock-names = "sram0", "sram1", "aisram";
+    };

Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml

@@ -63,6 +63,11 @@ properties:
       - riscv,sv48
       - riscv,none
 
+  riscv,cbom-block-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The blocksize in bytes for the Zicbom cache operations.
+
   riscv,isa:
     description:
       Identifies the specific RISC-V instruction set architecture

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -46,7 +46,7 @@ properties:
     const: 2
 
   cache-sets:
-    const: 1024
+    enum: [1024, 2048]
 
   cache-size:
     const: 2097152
@@ -84,13 +84,17 @@ then:
       description: |
         Must contain entries for DirError, DataError and DataFail signals.
       maxItems: 3
+    cache-sets:
+      const: 1024
 
 else:
   properties:
     interrupts:
       description: |
         Must contain entries for DirError, DataError, DataFail, DirFail signals.
       minItems: 4
+    cache-sets:
+      const: 2048
 
 additionalProperties: false
 

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -113,6 +113,7 @@ config RISCV
 	select MODULES_USE_ELF_RELA if MODULES
 	select MODULE_SECTIONS if MODULES
 	select OF
+	select OF_DMA_DEFAULT_COHERENT
 	select OF_EARLY_FLATTREE
 	select OF_IRQ
 	select PCI_DOMAINS_GENERIC if PCI
@@ -218,6 +219,14 @@ config PGTABLE_LEVELS
 config LOCKDEP_SUPPORT
 	def_bool y
 
+config RISCV_DMA_NONCOHERENT
+	bool
+	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SETUP_DMA_OPS
+	select DMA_DIRECT_REMAP
+
 source "arch/riscv/Kconfig.socs"
 source "arch/riscv/Kconfig.erratas"
 
@@ -392,6 +401,28 @@ config RISCV_ISA_SVPBMT
 
 	   If you don't know what to do here, say Y.
 
+config CC_HAS_ZICBOM
+	bool
+	default y if 64BIT && $(cc-option,-mabi=lp64 -march=rv64ima_zicbom)
+	default y if 32BIT && $(cc-option,-mabi=ilp32 -march=rv32ima_zicbom)
+
+config RISCV_ISA_ZICBOM
+	bool "Zicbom extension support for non-coherent DMA operation"
+	depends on CC_HAS_ZICBOM
+	depends on !XIP_KERNEL && MMU
+	select RISCV_DMA_NONCOHERENT
+	select RISCV_ALTERNATIVE
+	default y
+	help
+	   Adds support to dynamically detect the presence of the ZICBOM
+	   extension (Cache Block Management Operations) and enable its
+	   usage.
+
+	   The Zicbom extension can be used to handle for example
+	   non-coherent DMA support on devices that need it.
+
+	   If you don't know what to do here, say Y.
+
 config FPU
 	bool "FPU support"
 	default y
@@ -463,7 +494,6 @@ config KEXEC_FILE
 
 config ARCH_HAS_KEXEC_PURGATORY
 	def_bool KEXEC_FILE
-	select BUILD_BIN2C
 	depends on CRYPTO=y
 	depends on CRYPTO_SHA256=y
 

arch/riscv/Kconfig

@@ -55,4 +55,15 @@ config ERRATA_THEAD_PBMT
 
 	  If you don't know what to do here, say "Y".
 
+config ERRATA_THEAD_CMO
+	bool "Apply T-Head cache management errata"
+	depends on ERRATA_THEAD
+	select RISCV_DMA_NONCOHERENT
+	default y
+	help
+	  This will apply the cache management errata to handle the
+	  non-standard handling on non-coherent operations on T-Head SoCs.
+
+	  If you don't know what to do here, say "Y".
+
 endmenu # "CPU errata selection"

arch/riscv/Kconfig.erratas

@@ -56,6 +56,14 @@ riscv-march-$(CONFIG_RISCV_ISA_C)	:= $(riscv-march-y)c
 toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei)
 riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei
 
+# Check if the toolchain supports Zicbom extension
+toolchain-supports-zicbom := $(call cc-option-yn, -march=$(riscv-march-y)_zicbom)
+riscv-march-$(toolchain-supports-zicbom) := $(riscv-march-y)_zicbom
+
+# Check if the toolchain supports Zihintpause extension
+toolchain-supports-zihintpause := $(call cc-option-yn, -march=$(riscv-march-y)_zihintpause)
+riscv-march-$(toolchain-supports-zihintpause) := $(riscv-march-y)_zihintpause
+
 KBUILD_CFLAGS += -march=$(subst fd,,$(riscv-march-y))
 KBUILD_AFLAGS += -march=$(riscv-march-y)
 

arch/riscv/Makefile

@@ -1,3 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))
-obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y))
+dtb-$(CONFIG_SOC_CANAAN) += canaan_kd233.dtb
+dtb-$(CONFIG_SOC_CANAAN) += k210_generic.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_bit.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_dock.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_go.dtb
+dtb-$(CONFIG_SOC_CANAAN) += sipeed_maixduino.dtb
+
+obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb.o, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))