Merge tag 'asahi-soc-dt-5.20' of https://github.com/AsahiLinux/linux into arm/late

Apple SoC DT updates for 5.20.

This round just adds the NVMe controller nodes, since that driver is
finally upstream. Includes one related power domain fixup.

* tag 'asahi-soc-dt-5.20' of https://github.com/AsahiLinux/linux:
  arm64: dts: apple: t8103: Add ANS2 NVMe nodes
  arm64: dts: apple: Re-parent ANS2 power domains

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>

Author: arndb

arch/arm64/boot/dts/apple/t8103-pmgr.dtsi

@@ -725,11 +725,6 @@
 		#power-domain-cells = <0>;
 		#reset-cells = <0>;
 		label = "ans2";
-		/*
-		 * The ADT makes ps_apcie_st depend on ps_ans2 instead, but this
-		 * doesn't make much sense since ANS2 uses APCIE_ST.
-		 */
-		power-domains = <&ps_apcie_st>;
 	};
 
 	ps_gfx: power-controller@3f8 {
@@ -836,7 +831,7 @@
 		#power-domain-cells = <0>;
 		#reset-cells = <0>;
 		label = "apcie_st";
-		power-domains = <&ps_apcie>;
+		power-domains = <&ps_apcie>, <&ps_ans2>;
 	};
 
 	ps_ane_sys: power-controller@470 {

arch/arm64/boot/dts/apple/t8103.dtsi

@@ -378,6 +378,40 @@
 				     <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		ans_mbox: mbox@277408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x77408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 583 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 584 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 585 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 586 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans2>;
+		};
+
+		sart: iommu@27bc50000 {
+			compatible = "apple,t8103-sart";
+			reg = <0x2 0x7bc50000 0x0 0x10000>;
+			power-domains = <&ps_ans2>;
+		};
+
+		nvme@27bcc0000 {
+			compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+				<0x2 0x77400000 0x0 0x4000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans2>, <&ps_apcie_st>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans2>;
+		};
+
 		pcie0_dart_0: dart@681008000 {
 			compatible = "apple,t8103-dart";
 			reg = <0x6 0x81008000 0x0 0x4000>;