Merge tag 'amd-drm-fixes-6.2-2023-01-04' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.2-2023-01-04:

amdgpu:
- DCN 3.2 fix
- Display fix

amdkfd:
- Fix kernel warning

Signed-off-by: Daniel Vetter <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Author: danvet

drivers/gpu/drm/amd/amdgpu/amdgpu.h

@@ -195,6 +195,7 @@ extern int amdgpu_emu_mode;
 extern uint amdgpu_smu_memory_pool_size;
 extern int amdgpu_smu_pptable_id;
 extern uint amdgpu_dc_feature_mask;
+extern uint amdgpu_freesync_vid_mode;
 extern uint amdgpu_dc_debug_mask;
 extern uint amdgpu_dc_visual_confirm;
 extern uint amdgpu_dm_abm_level;

drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c

@@ -181,6 +181,7 @@ int amdgpu_mes_kiq;
 int amdgpu_noretry = -1;
 int amdgpu_force_asic_type = -1;
 int amdgpu_tmz = -1; /* auto */
+uint amdgpu_freesync_vid_mode;
 int amdgpu_reset_method = -1; /* auto */
 int amdgpu_num_kcq = -1;
 int amdgpu_smartshift_bias;
@@ -879,6 +880,32 @@ module_param_named(backlight, amdgpu_backlight, bint, 0444);
 MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on)");
 module_param_named(tmz, amdgpu_tmz, int, 0444);
 
+/**
+ * DOC: freesync_video (uint)
+ * Enable the optimization to adjust front porch timing to achieve seamless
+ * mode change experience when setting a freesync supported mode for which full
+ * modeset is not needed.
+ *
+ * The Display Core will add a set of modes derived from the base FreeSync
+ * video mode into the corresponding connector's mode list based on commonly
+ * used refresh rates and VRR range of the connected display, when users enable
+ * this feature. From the userspace perspective, they can see a seamless mode
+ * change experience when the change between different refresh rates under the
+ * same resolution. Additionally, userspace applications such as Video playback
+ * can read this modeset list and change the refresh rate based on the video
+ * frame rate. Finally, the userspace can also derive an appropriate mode for a
+ * particular refresh rate based on the FreeSync Mode and add it to the
+ * connector's mode list.
+ *
+ * Note: This is an experimental feature.
+ *
+ * The default value: 0 (off).
+ */
+MODULE_PARM_DESC(
+	freesync_video,
+	"Enable freesync modesetting optimization feature (0 = off (default), 1 = on)");
+module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
+
 /**
  * DOC: reset_method (int)
  * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

@@ -801,7 +801,7 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
 
 		p2plink->attr.name = "properties";
 		p2plink->attr.mode = KFD_SYSFS_FILE_MODE;
-		sysfs_attr_init(&iolink->attr);
+		sysfs_attr_init(&p2plink->attr);
 		ret = sysfs_create_file(p2plink->kobj, &p2plink->attr);
 		if (ret < 0)
 			return ret;

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -5835,7 +5835,8 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector,
 		 */
 		DRM_DEBUG_DRIVER("No preferred mode found\n");
 	} else {
-		recalculate_timing = is_freesync_video_mode(&mode, aconnector);
+		recalculate_timing = amdgpu_freesync_vid_mode &&
+				 is_freesync_video_mode(&mode, aconnector);
 		if (recalculate_timing) {
 			freesync_mode = get_highest_refresh_rate_mode(aconnector, false);
 			drm_mode_copy(&saved_mode, &mode);
@@ -6986,7 +6987,7 @@ static void amdgpu_dm_connector_add_freesync_modes(struct drm_connector *connect
 	struct amdgpu_dm_connector *amdgpu_dm_connector =
 		to_amdgpu_dm_connector(connector);
 
-	if (!edid)
+	if (!(amdgpu_freesync_vid_mode && edid))
 		return;
 
 	if (amdgpu_dm_connector->max_vfreq - amdgpu_dm_connector->min_vfreq > 10)
@@ -8850,7 +8851,8 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
 		 * TODO: Refactor this function to allow this check to work
 		 * in all conditions.
 		 */
-		if (dm_new_crtc_state->stream &&
+		if (amdgpu_freesync_vid_mode &&
+		    dm_new_crtc_state->stream &&
 		    is_timing_unchanged_for_freesync(new_crtc_state, old_crtc_state))
 			goto skip_modeset;
 
@@ -8885,7 +8887,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
 		if (!dm_old_crtc_state->stream)
 			goto skip_modeset;
 
-		if (dm_new_crtc_state->stream &&
+		if (amdgpu_freesync_vid_mode && dm_new_crtc_state->stream &&
 		    is_timing_unchanged_for_freesync(new_crtc_state,
 						     old_crtc_state)) {
 			new_crtc_state->mode_changed = false;
@@ -8897,7 +8899,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
 			set_freesync_fixed_config(dm_new_crtc_state);
 
 			goto skip_modeset;
-		} else if (aconnector &&
+		} else if (amdgpu_freesync_vid_mode && aconnector &&
 			   is_freesync_video_mode(&new_crtc_state->mode,
 						  aconnector)) {
 			struct drm_display_mode *high_mode;

drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c

@@ -6257,12 +6257,12 @@ bool dml32_CalculateDETSwathFillLatencyHiding(unsigned int NumberOfActiveSurface
 	double SwathSizePerSurfaceC[DC__NUM_DPP__MAX];
 	bool NotEnoughDETSwathFillLatencyHiding = false;
 
-	/* calculate sum of single swath size for all pipes in bytes*/
+	/* calculate sum of single swath size for all pipes in bytes */
 	for (k = 0; k < NumberOfActiveSurfaces; k++) {
-		SwathSizePerSurfaceY[k] += SwathHeightY[k] * SwathWidthY[k] * BytePerPixelInDETY[k] * NumOfDPP[k];
+		SwathSizePerSurfaceY[k] = SwathHeightY[k] * SwathWidthY[k] * BytePerPixelInDETY[k] * NumOfDPP[k];
 
 		if (SwathHeightC[k] != 0)
-			SwathSizePerSurfaceC[k] += SwathHeightC[k] * SwathWidthC[k] * BytePerPixelInDETC[k] * NumOfDPP[k];
+			SwathSizePerSurfaceC[k] = SwathHeightC[k] * SwathWidthC[k] * BytePerPixelInDETC[k] * NumOfDPP[k];
 		else
 			SwathSizePerSurfaceC[k] = 0;