mmc: sdhci-esdhc-imx: correct CQHCI exit halt state check

With the current logic the "failed to exit halt state" error would be
shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL
register, since the right hand side is always true. Fix this by using
the correct operator (bit-wise instead of logical AND) to only check for
the halt bit flag, which was obviously intended here.

Fixes: 85236d2 ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE")
Signed-off-by: Sebastian Falbesoner <[email protected]>
Acked-by: Haibo Chen <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>

Author: theStack

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -1512,7 +1512,7 @@ static void esdhc_cqe_enable(struct mmc_host *mmc)
 	 * system resume back.
 	 */
 	cqhci_writel(cq_host, 0, CQHCI_CTL);
-	if (cqhci_readl(cq_host, CQHCI_CTL) && CQHCI_HALT)
+	if (cqhci_readl(cq_host, CQHCI_CTL) & CQHCI_HALT)
 		dev_err(mmc_dev(host->mmc),
 			"failed to exit halt state when enable CQE\n");