platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode

acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument
specifying that the pins direction should be initialized to a specific
value.

This means that in some cases the pins might be left in input mode, causing
the gpiod_set() calls made to enable the clk / regulator to not work.

One example of this problem is the clk-enable GPIO for the ov01a1s sensor
on a Dell Latitude 9420 being left in input mode causing the clk to
never get enabled.

Explicitly set the direction of the pins to output to fix this.

Fixes: 5de691b ("platform/x86: Add intel_skl_int3472 driver")
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Daniel Scally <[email protected]>
Reviewed-by: Sakari Ailus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

Author: jwrdegoede

drivers/platform/x86/intel/int3472/clk_and_regulator.c

@@ -181,6 +181,9 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 		return PTR_ERR(int3472->regulator.gpio);
 	}
 
+	/* Ensure the pin is in output mode and non-active state */
+	gpiod_direction_output(int3472->regulator.gpio, 0);
+
 	cfg.dev = &int3472->adev->dev;
 	cfg.init_data = &init_data;
 	cfg.ena_gpiod = int3472->regulator.gpio;

drivers/platform/x86/intel/int3472/discrete.c

@@ -168,13 +168,17 @@ static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472,
 			return (PTR_ERR(gpio));
 
 		int3472->clock.ena_gpio = gpio;
+		/* Ensure the pin is in output mode and non-active state */
+		gpiod_direction_output(int3472->clock.ena_gpio, 0);
 		break;
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 		gpio = acpi_get_and_request_gpiod(path, pin, "int3472,privacy-led");
 		if (IS_ERR(gpio))
 			return (PTR_ERR(gpio));
 
 		int3472->clock.led_gpio = gpio;
+		/* Ensure the pin is in output mode and non-active state */
+		gpiod_direction_output(int3472->clock.led_gpio, 0);
 		break;
 	default:
 		dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type);