Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Use pci_find_vsec_capability() instead of open-coding it (Andy
     Shevchenko)
   - Convert pci_dev_present() stub from macro to static inline to avoid
     'unused variable' errors (Hans de Goede)
   - Convert sysfs slot attributes from default_attrs to default_groups
     (Greg Kroah-Hartman)
   - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
     (Rajat Jain)
   - Remove unnecessary initialization of static variables (Longji Guo)

  Resource management:
   - Always write Intel I210 ROM BAR on update to work around device
     defect (Bjorn Helgaas)

  PCIe native device hotplug:
   - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
   - Fix infinite loop in pciehp IRQ handler on power fault (Lukas
     Wunner)

  Power management:
   - Convert amd64-agp, sis-agp, via-agp from legacy PCI power
     management to generic power management (Vaibhav Gupta)

  IOMMU:
   - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
     so it can work with an IOMMU (Yifeng Li)

  Error handling:
   - Add PCI_ERROR_RESPONSE and related definitions for signaling and
     checking for transaction errors on PCI (Naveen Naidu)
   - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
     instead of in host controller drivers, when transactions fail on
     PCI (Naveen Naidu)
   - Use PCI_POSSIBLE_ERROR() to check for possible failure of config
     reads (Naveen Naidu)

  Peer-to-peer DMA:
   - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)

  ASPM:
   - Calculate link L0s and L1 exit latencies when needed instead of
     caching them (Saheed O. Bolarinwa)
   - Calculate device L0s and L1 acceptable exit latencies when needed
     instead of caching them (Saheed O. Bolarinwa)
   - Remove struct aspm_latency since it's no longer needed (Saheed O.
     Bolarinwa)

  APM X-Gene PCIe controller driver:
   - Fix IB window setup, which was broken by the fact that IB resources
     are now sorted in address order instead of DT dma-ranges order (Rob
     Herring)

  Apple PCIe controller driver:
   - Enable clock gating to save power (Hector Martin)
   - Fix REFCLK1 enable/poll logic (Hector Martin)

  Broadcom STB PCIe controller driver:
   - Declare bitmap correctly for use by bitmap interfaces (Christophe
     JAILLET)
   - Clean up computation of legacy and non-legacy MSI bitmasks (Florian
     Fainelli)
   - Update suspend/resume/remove error handling to warn about errors
     and not fail the operation (Jim Quinlan)
   - Correct the "pcie" and "msi" interrupt descriptions in DT binding
     (Jim Quinlan)
   - Add DT bindings for endpoint voltage regulators (Jim Quinlan)
   - Split brcm_pcie_setup() into two functions (Jim Quinlan)
   - Add mechanism for turning on voltage regulators for connected
     devices (Jim Quinlan)
   - Turn voltage regulators for connected devices on/off when bus is
     added or removed (Jim Quinlan)
   - When suspending, don't turn off voltage regulators for wakeup
     devices (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Add i.MX8MM support (Richard Zhu)

  Freescale Layerscape PCIe controller driver:
   - Use DWC common ops instead of layerscape-specific link-up functions
     (Hou Zhiqiang)

  Intel VMD host bridge driver:
   - Honor platform ACPI _OSC feature negotiation for Root Ports below
     VMD (Kai-Heng Feng)
   - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
   - Reset everything below VMD before enumerating to work around
     failure to enumerate NVMe devices when guest OS reboots (Nirmal
     Patel)

  Bridge emulation (used by Marvell Aardvark and MVEBU):
   - Make emulated ROM BAR read-only by default (Pali Rohár)
   - Make some emulated legacy PCI bits read-only for PCIe devices (Pali
     Rohár)
   - Update reserved bits in emulated PCIe Capability (Pali Rohár)
   - Allow drivers to emulate different PCIe Capability versions (Pali
     Rohár)
   - Set emulated Capabilities List bit for all PCIe devices, since they
     must have at least a PCIe Capability (Pali Rohár)

  Marvell Aardvark PCIe controller driver:
   - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
     DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
     Rohár)
   - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
     registers (Pali Rohár)
   - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)
   - Disable bus mastering when unbinding host controller driver (Pali
     Rohár)
   - Mask all interrupts when unbinding host controller driver (Pali
     Rohár)
   - Fix memory leak in host controller unbind (Pali Rohár)
   - Assert PERST# when unbinding host controller driver (Pali Rohár)
   - Disable link training when unbinding host controller driver (Pali
     Rohár)
   - Disable common PHY when unbinding host controller driver (Pali
     Rohár)
   - Fix resource type checking to check only IORESOURCE_MEM, not
     IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)

  Marvell MVEBU PCIe controller driver:
   - Implement pci_remap_iospace() for ARM so mvebu can use
     devm_pci_remap_iospace() instead of the previous ARM-specific
     pci_ioremap_io() interface (Pali Rohár)
   - Use the standard pci_host_probe() instead of the device-specific
     mvebu_pci_host_probe() (Pali Rohár)
   - Replace all uses of ARM-specific pci_ioremap_io() with the ARM
     implementation of the standard pci_remap_iospace() interface and
     remove pci_ioremap_io() (Pali Rohár)
   - Skip initializing invalid Root Ports (Pali Rohár)
   - Check for errors from pci_bridge_emul_init() (Pali Rohár)
   - Ignore any bridges at non-zero function numbers (Pali Rohár)
   - Return ~0 data for invalid config read size (Pali Rohár)
   - Disallow mapping interrupts on emulated bridges (Pali Rohár)
   - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
     initialization (Pali Rohár)
   - Make type bits in Root Port I/O Base register read-only (Pali
     Rohár)
   - Disable Root Port windows when base/limit set to invalid values
     (Pali Rohár)
   - Set controller to Root Complex mode (Pali Rohár)
   - Set Root Port Class Code to PCI Bridge (Pali Rohár)
   - Update emulated Root Port secondary bus numbers to better reflect
     the actual topology (Pali Rohár)
   - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
     pci_reset_secondary_bus() can reset connected devices (Pali Rohár)
   - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
     Ports (Pali Rohár)
   - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
     (Pali Rohár)
   - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
     Armada XP and newer devices (Pali Rohár)
   - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
     (Pali Rohár)
   - Add support for compiling as a module (Pali Rohár)

  MediaTek PCIe controller driver:
   - Assert PERST# for 100ms to allow power and clock to stabilize
     (qizhong cheng)

  MediaTek PCIe Gen3 controller driver:
   - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
     respond to the request causes failure to exit L1 PM Substate
     (Jianjun Wang)

  MediaTek MT7621 PCIe controller driver:
   - Declare mt7621_pci_ops static (Sergio Paracuellos)
   - Give pcibios_root_bridge_prepare() access to host bridge windows
     (Sergio Paracuellos)
   - Move MIPS I/O coherency unit setup from driver to
     pcibios_root_bridge_prepare() (Sergio Paracuellos)
   - Add missing MODULE_LICENSE() (Sergio Paracuellos)
   - Allow COMPILE_TEST for all arches (Sergio Paracuellos)

  Microsoft Hyper-V host bridge driver:
   - Add hv-internal interfaces to encapsulate arch IRQ dependencies
     (Sunil Muthuswamy)
   - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)

  Qualcomm PCIe controller driver:
   - Undo PM setup in qcom_pcie_probe() error handling path (Christophe
     JAILLET)
   - Use __be16 type to store return value from cpu_to_be16()
     (Manivannan Sadhasivam)
   - Constify static dw_pcie_ep_ops (Rikard Falkeborn)

  Renesas R-Car PCIe controller driver:
   - Fix aarch32 abort handler so it doesn't check the wrong bus clock
     before accessing the host controller (Marek Vasut)

  TI Keystone PCIe controller driver:
   - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
     DT properties (Kishon Vijay Abraham I)

  MicroSemi Switchtec management driver:
   - Add Gen4 automotive device IDs (Kelvin Cao)
   - Declare state_names[] as static so it's not allocated and
     initialized for every call (Kelvin Cao)

  Host controller driver cleanups:
   - Use of_device_get_match_data(), not of_match_device(), when we only
     need the device data in altera, artpec6, cadence, designware-plat,
     dra7xx, keystone, kirin (Fan Fei)
   - Drop pointless of_device_get_match_data() cast in j721e (Bjorn
     Helgaas)
   - Drop redundant struct device * from j721e since struct cdns_pcie
     already has one (Bjorn Helgaas)
   - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
     mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
     xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
   - Fix invalid address space conversions in hisi, spear13xx (Bjorn
     Helgaas)

  Miscellaneous:
   - Sort Intel Device IDs by value (Andy Shevchenko)
   - Change Capability offsets to hex to match spec (Baruch Siach)
   - Correct misspellings (Krzysztof Wilczyński)
   - Terminate statement with semicolon in pci_endpoint_test.c (Ming
     Wang)"

* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
  PCI: mt7621: Allow COMPILE_TEST for all arches
  PCI: mt7621: Add missing MODULE_LICENSE()
  PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
  PCI: Let pcibios_root_bridge_prepare() access bridge->windows
  PCI: mt7621: Declare mt7621_pci_ops static
  PCI: brcmstb: Do not turn off WOL regulators on suspend
  PCI: brcmstb: Add control of subdevice voltage regulators
  PCI: brcmstb: Add mechanism to turn on subdev regulators
  PCI: brcmstb: Split brcm_pcie_setup() into two funcs
  dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
  dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
  PCI: brcmstb: Fix function return value handling
  PCI: brcmstb: Do not use __GENMASK
  PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
  PCI: hv: Add arm64 Hyper-V vPCI support
  PCI: hv: Make the code arch neutral by adding arch specific interfaces
  PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
  x86/PCI: Remove initialization of static variables to false
  PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
  misc: pci_endpoint_test: Terminate statement with semicolon
  ...

Author: torvalds

Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

@@ -146,17 +146,40 @@ examples:
                     #address-cells = <3>;
                     #size-cells = <2>;
                     #interrupt-cells = <1>;
-                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
                                  <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
                     interrupt-names = "pcie", "msi";
                     interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
                     dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
                                  <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
                     brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge, Root Port */
+                    pci@0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            compatible = "pciclass,0604";
+                            device_type = "pci";
+                            vpcie3v3-supply = <&vreg7>;
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci-ep@0,0 {
+                                    assigned-addresses =
+                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                            };
+                    };
             };
     };

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml

@@ -127,6 +127,12 @@ properties:
     enum: [1, 2, 3, 4]
     default: 1
 
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
   reset-gpio:
     description: Should specify the GPIO for controlling the PCI bus device
       reset signal. It's not polarity aware and defaults to active-low reset

Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml

@@ -32,8 +32,12 @@ properties:
     maxItems: 1
 
   ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
     description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   interrupts:
     minItems: 1
@@ -65,7 +69,7 @@ examples:
                <0x5506000 0x1000>;
         reg-names = "app", "dbics", "addr_space", "atu";
         power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
-        ti,syscon-pcie-mode = <&pcie0_mode>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;

Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml

@@ -36,12 +36,20 @@ properties:
     maxItems: 1
 
   ti,syscon-pcie-id:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_device_id register offset within SYSCON
     description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
     description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   msi-map: true
 
@@ -87,8 +95,8 @@ examples:
         #size-cells = <2>;
         ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
                  <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
-        ti,syscon-pcie-id = <&pcie_devid>;
-        ti,syscon-pcie-mode = <&pcie0_mode>;
+        ti,syscon-pcie-id = <&scm_conf 0x0210>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         bus-range = <0x0 0xff>;
         max-link-speed = <2>;
         dma-coherent;

MAINTAINERS

@@ -14890,6 +14890,19 @@ L:	[email protected]
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.rst
 
+PCI PEER-TO-PEER DMA (P2PDMA)
+M:	Bjorn Helgaas <[email protected]>
+M:	Logan Gunthorpe <[email protected]>
+L:	[email protected]
+S:	Supported
+Q:	https://patchwork.kernel.org/project/linux-pci/list/
+B:	https://bugzilla.kernel.org
+C:	irc://irc.oftc.net/linux-pci
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
+F:	Documentation/driver-api/pci/p2pdma.rst
+F:	drivers/pci/p2pdma.c
+F:	include/linux/pci-p2pdma.h
+
 PCI MSI DRIVER FOR ALTERA MSI IP
 M:	Joyce Ooi <[email protected]>
 L:	[email protected]

arch/arm/include/asm/io.h

@@ -180,7 +180,10 @@ void pci_ioremap_set_mem_type(int mem_type);
 static inline void pci_ioremap_set_mem_type(int mem_type) {}
 #endif
 
-extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
+struct resource;
+
+#define pci_remap_iospace pci_remap_iospace
+int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
 
 /*
  * PCI configuration space mapping function.

arch/arm/mach-dove/pcie.c

@@ -38,6 +38,7 @@ static int num_pcie_ports;
 static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
+	struct resource realio;
 
 	if (nr >= num_pcie_ports)
 		return 0;
@@ -53,10 +54,10 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
 
 	orion_pcie_setup(pp->base);
 
-	if (pp->index == 0)
-		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE);
-	else
-		pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, pp->index == 0 ? DOVE_PCIE0_IO_PHYS_BASE :
+						    DOVE_PCIE1_IO_PHYS_BASE);
 
 	/*
 	 * IORESOURCE_MEM

arch/arm/mach-iop32x/pci.c

@@ -185,6 +185,7 @@ iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	struct resource *res;
+	struct resource realio;
 
 	if (nr != 0)
 		return 0;
@@ -206,7 +207,9 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 
 	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
 
-	pci_ioremap_io(0, IOP3XX_PCI_LOWER_IO_PA);
+	realio.start = 0;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, IOP3XX_PCI_LOWER_IO_PA);
 
 	return 1;
 }

arch/arm/mach-mv78xx0/pcie.c

@@ -101,6 +101,7 @@ static void __init mv78xx0_pcie_preinit(void)
 static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
+	struct resource realio;
 
 	if (nr >= num_pcie_ports)
 		return 0;
@@ -115,7 +116,9 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
 	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
 	orion_pcie_setup(pp->base);
 
-	pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr));
+	realio.start = nr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, MV78XX0_PCIE_IO_PHYS_BASE(nr));
 
 	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
 

arch/arm/mach-orion5x/pci.c

@@ -142,6 +142,7 @@ static struct pci_ops pcie_ops = {
 static int __init pcie_setup(struct pci_sys_data *sys)
 {
 	struct resource *res;
+	struct resource realio;
 	int dev;
 
 	/*
@@ -164,7 +165,9 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 
-	pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCIE_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, ORION5X_PCIE_IO_PHYS_BASE);
 
 	/*
 	 * Request resources.
@@ -466,6 +469,7 @@ static void __init orion5x_setup_pci_wins(void)
 static int __init pci_setup(struct pci_sys_data *sys)
 {
 	struct resource *res;
+	struct resource realio;
 
 	/*
 	 * Point PCI unit MBUS decode windows to DRAM space.
@@ -482,7 +486,9 @@ static int __init pci_setup(struct pci_sys_data *sys)
 	 */
 	orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
 
-	pci_ioremap_io(sys->busnr * SZ_64K, ORION5X_PCI_IO_PHYS_BASE);
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, ORION5X_PCI_IO_PHYS_BASE);
 
 	/*
 	 * Request resources